• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.1027-1034
• /
• 2007

This research was focused on the selective separation of $CO_2$ or $CH_4$ from mixture of these gases, by controlling the size of pore or pore gate. Pitch based activated carbon fibers(ACF) were used as adsorbents. The size of pore gate was controlled by the molecule having similar size to that of pore opening. After the adsorption of adsorbate on pore surface, planar molecules such as benzene and naphthalene covered the pore gate. The slow release of adsorbate from the pores covered by planar molecules makes apertures between planar molecules covering pore gate and this structure can be fixed by rapid pyrolysis. The control of pore gate using benzene as covering molecules could not accomplished due to the simultaneous volatilization of benzene and adsorbate$(CO_2)$ caused by similar temperatures of benzene volatilization and adsorbate desorption. Therefore we replaced benzene with naphthalene looking for the stability at a $CO_2$ desorption temperature. The naphthalene molecule was adsorbed on the ACF up to 15% of ACF weight and showed no desorption until $100^{\circ}C$, indicating that the molecule could be used as a good cover molecule. Naphthalene could cover almost all the pore gate, reducing BET surface area from 753 $m^2/g$ to 0.7 $m^2/g$. A mixed gas$(CO_2:CH_4=50:50)$ was adsorbed on the naphthalene treated OG-7A ACF. The amount of $CO_2$ adsorption increased with total pressure, whileas thai of $CH_4$ was not so much influenced on the pressure, indicating that $CO_2$ made more compounds on the ACF surface along with total pressure increase. The most $CO_2$ and the least $CH_4$ were adsorbed in the condition of 0.4 atm, resulting in the highly pure $CH_4$ left in ACF.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.334-341
• /
• 2006

This study was to investigate the growth of planted red pine (Pinus densiflora S. et. Z.) seedling, soil properties and understory vegetation structure after fertilizer treatments [unfertilized plot (control), CF plot (Combination Fertilizer), UF plot (Urea Formaldehyde Fertilizer)] in a Pinus densiflora stand planted after the forest fires in Gosung, Gangwon province. The height growth rates of seedlings in four years were 264% in unfertilized, 404% in CF, and 388% in UF plots, respectively. The root collar diameters were increased 340% in unfertilized, 454% in CF, and 427% in UF plots, respectively. No significant changes occurred in soil total nitrogen and potassium ion ($K^+$) with the fertilization. However, available $P_2O_5$, content in the soil surface (0-15 cm) increased with the fertilizer application. Soil organic matter increased significantly with fertilizer treatments, while gradual decrease occurred in unfertilized plots. Sodium ion ($Na^-$) decreased in all sites. Soil pH, CEC, calcium ion ($Ca^{2+}$) and magnesium ion ($Mg^{2+}$) contents were not significantly different among treatments. Although Shannon's species diversity index and species richness in understory vegetation did not change with fertilizer treatments, vegetation cover rates in forest floor increased significantly with the fertilization. These results suggest that the increase of pine seedling growth and vegetation cover rates with fertilization could enhance soil stabilization in forest tire areas.

• Korean Journal of Environment and Ecology
• /
• v.19 no.4
• /
• pp.375-384
• /
• 2005

This study was conducted selecting 44 places with a block unit subject to urban area in Gangnam-gu, to analyze a temperature change according to land use and green structure. In this study, it was used the broad-wide urban temperature, supported by Landset TM and ETM+ satellite image 6scene(1999${\~}$2002). The result of the research, the land use pattern has slightly influence on a temperature change of urban area. The result from correlation analysis between temperature and the factors affected by land cover type, such as building-to-land ratio(A correlation coefficient is 0.368${\~}$0.709) have positive correlation and green area ratio(a correlation coefficient is -0.551${\~}$-0.860) have negative correlation. The result from correlation analysis between temperature and green capacity of the land, crown projection area ratio, each factor have negative correlation with temperature, as showing that a correlation coefficient of green capacity of the land is -0.577(June 2006)${\~}$-0.882(June 1999) and crown projection area ratio's is -0.549(June 2001)${\~}$-0.817(June 1999). The result of the regression analysis for establishing urban area temperature change prediction model showed that green capacity of the land of the explanation variable was accepted.

• Tunnel and Underground Space
• /
• v.22 no.2
• /
• pp.120-129
• /
• 2012

Recently, mining facilities have being installed in an underground space according to a social demand for environment-friendly mine development. The underground structures for mining facilities usually requires a large volume of space with width greater than height, and thus the stability assessment of the large-scale underground mine structure is an important issue. In this study, we analysed a factor of safety based on strength reduction method, and proposed a numerical design approach to determining the dimension of underground mine structures in combination with a strength reduction method and a multivariate regression analysis. Input design parameters considered in the present study were the stress ratio and shear strength of rock mass, and the width and cover depth of underground mine structures. The stabilities of underground mine structures were assessed in terms of factor of safety under different conditions of the above input parameters. It was calculated by the strength reduction method, and several kinds of fit functions were obtained through various multivariate regression analyses. Using a best-fit regression model, we proposed the charts which provide preliminary design information on the dimension of underground mine structures.

• Parasites, Hosts and Diseases
• /
• v.28 no.4
• /
• pp.197-206
• /
• 1990

Various conditions of cultures were performed to investigate the role of tight junctions formed between adjacent MDCK cells on the entry of Toxoplasma. When MDCK cells were cocultured with excess number of Toxoplasma at the seeding density of 1×105, 3×105, and 5×105 cells/ml for 4 days, the number of intracellular parasites decreased rapidly as the host cells reached saturation density, i.e., the formation of tight junctions. When the concentration of calcium in the media (1.8 mM in general) was shifted to $5{\mu}M$ that resulted in the elimination of tight junction, the penetration of Toxoplasma increased about 2-fold(p<0.05) in the saturated culture, while that of non-saturated culture decreased by half. Trypsin-EDTA which was treated to conquer the tight junctions of saturated culture favored the entry of Toxoplasma about 2.5-fold(P<0.05) compared to the non-treated, while that of non- saturated culture decreased to about one fifth. It was suggested that the tight junctions of epithelial cells play a role as a barrier for the entry of Toxoplasma and Toxoplasma penetrate into hoot cells through membrane structure-specific, i.e., certain kind of receptors present on the basolateral rather than apical surface of MDCK cells.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.71-91
• /
• 2018

In recent years, application of UAV(Unmanned Aerial Vehicle) to seed sowing and pest control has been actively carried out in the field of agriculture. In this study, UAS(Unmanned Aerial System) is constructed by combining image sensor of various wavelength band and SfM((Structure from Motion) based image analysis technique in UAV. Utilization of UAS based vegetation survey was investigated and the applicability of precision farming was examined. For this purposes, a UAS consisting of a combination of a VIS_RGB(Visible Red, Green, and Blue) image sensor, a modified BG_NIR(Blue Green_Near Infrared Red) image sensor, and a TIR(Thermal Infrared Red) sensor with a wide bandwidth of $7.5{\mu}m$ to $13.5{\mu}m$ was constructed for a low cost UAV. In addition, a total of ten vegetation indices were selected to investigate the chlorophyll, nitrogen and water contents of plants with visible, near infrared, and infrared wavelength's image sensors. The images of each wavelength band for the test area were analyzed and the correlation between the distribution of vegetation index and the vegetation index were compared with status of the previously surveyed vegetation and ground cover. The ability to perform vegetation state detection using images obtained by mounting multiple image sensors on low cost UAV was investigated. As the utility of UAS equipped with VIS_RGB, BG_NIR and TIR image sensors on the low cost UAV has proven to be more economical and efficient than previous vegetation survey methods that depend on satellites and aerial images, is expected to be used in areas such as precision agriculture, water and forest research.

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.106-111
• /
• 2000

The magnetic thin films can be prepared without vacuum process and under the low temperature (<100 $^{\circ}C$) by ferrite plating. We have performed ferrite plating of M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$(x=0.00~0.08) films and N $i_{x}$Z $n_{0.22}$F $e_{*}$2.78-x/ $O_4$(x=0.00~0.15) films on cover glass at the substrate temperature 90 $^{\circ}C$. The crystal structure of the samples has been identified as a single phase of polycrystal spinel structure by x-ray diffraction technique. The lattice constant in the M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$films increases but in the N $i_{x}$Z $n_{0.22}$F $e_{*}$2.78-x/ $O_4$films decrease with the composition parameter, x. The saturation magnetization in the M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$films does not greatly change, in agreement with observations on bulk samples.k samples.k samples.

• Journal of the Korea Concrete Institute
• /
• v.15 no.4
• /
• pp.529-540
• /
• 2003

Recently, the researches on the durability design of concrete structures have been studied. As the examples, models to evaluate the service life prediction of the structure have been developed. The purpose of this article is to develop the model for predicting remaining service life. The final aim is to provide the user time for repairing the concrete structures. In addition, it makes possible to maintain the concrete structure economically. 70 reservoirs out of the inland concrete structures were selected and concrete structures of their components were surveyed. Two methods were used for measuring carbonation; TG/DTA method and Phenolphtalein indicator and, the value of pH was measured by the pH meter, After deriving correlations of calcium carbonate and used year, duration from completion year to 2002, pH value, and concrete cover depth the model was developed for predicting remaining service life by measuring data as small as possible. The conventional models had been developed on the basis of experiment data obtained from the restricted lab environment like as carbon gas exposure. On the other hand this model was developed on the basis of measuring data obtained from the real field that the complex deterioration actions are occurred such as freezing and thawing, carbonation, steel corrosion, and so on. The reliability of the developed model will be evaluated high in this point and this model can help to maintain concrete structures economically by providing the manager time to repair the deteriorated concrete structures in site of facility management.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.9
• /
• pp.40-49
• /
• 2011

Integrating massive components and low-power policies have been actively investigated for system-on-chip designs. But in recent years, finding the optimal interconnection structure among heterogeneous components has emerged as a critical system design issue. Therefore, various simulation tools to model interconnection designs are being developed and performance evaluation of simulation is reflected in the real design. But most of the simulation environments employ traffic generation based on the mathematical probability functions, and such traffic generation cannot fully cover for various situations that may be occurred in the real system. Therefore, the demand for traffic pattern generation based on real applications is increasing. However, there have been few simulators that adopt application-specific traffic generators. This paper proposes a novel traffic generation method in simulating various interconnection structures for multi-processor system-on-chip design. The proposed traffic generation method can generate traffic patterns that can reflect the actual characteristics of the application and evaluate the performance of an interconnection structure under more realistic circumstance than traffic patterns using mathematical probability functions. By comparing the differences between the proposed method and the one based on mathematical probability functions, this paper shows advantages of the proposed traffic generation method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.49-55
• /
• 2007

To improved the multi-resolution fast hierarchical motion estimation by using de-interlacing algorithm that is effective in term of both performance and VLSI implementation, is proposed so as to cover large search area field-based as well as frame based image processing in SoC design. In this paper, we have simulated a various picture mode M=2 or M=3. As a results, the proposed algorithm achieved the motion estimation performance PSNR compare with the full search block matching algorithm, the average performance degradation reached to -0.7dB, which did not affect on the subjective quality of reconstructed images at all. And acquiring the more desirable to adopt design SoC for the fast hierarchical motion estimation, we exploit foreground and background search algorithm (FBSA) base on the dual arithmetic processor element(DAPE). It is possible to estimate the large search area motion displacement using a half of number PE in general operation methods. And the proposed architecture of MHME improve the VLSI design hardware through the proposed FBSA structure with DAPE to remove the local memory. The proposed FBSA which use bit array processing in search area can improve structure as like multiple processor array unit(MPAU).