• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.4
• /
• pp.3921-3930
• /
• 1975

This research was carried out to investigate several mechanical characteristics of pre-stressed steel beams. The configuration of specimens used for this study were as follows; a cover plate having permissible fiber stress of 4,000 kg/$\textrm{cm}^2$ was welded at bottom having the allowable bending stress 2500 kg/$\textrm{cm}^2$ steel beam, the section ratios of pre-stressed steel beam and cover plate were 0.5 and 0.6. Adopted pre-stresses were 0%, 50%, and 100% of an allowable fiber stress of a steel beam. The results obtained from the study may be summarized as follows; 1. The elastic range of a beam was increased by the application of pre-stress to the beam, which leads to a lighter section. 2. The permissible moment capacity of a pre-stressed steel beam was greated than that of a steel beam without pre-stressing. 3. The equivalent allowable stress induced by adopting the different section ratio of pre-stressed beam to cover plate were figured out 4. The optimum value of section ratio of beam and cover plate was 0.3 to 0.4 in case of a 1.5m span composite beam, a combination of an allowable stress 2,500kg/$\textrm{cm}^2$ steel beam and a permissible fiber stress 4,000 kg/$\textrm{cm}^2$ steel cover plate, was used. 5. The magnitude of the pre-stress was desirable to be same as the allowable stress of a steel beam. 6. It was concluded that if the construction techniques in the field are developed and improved, the practicing of pre-stress to the steel structure has a promising future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.769-776
• /
• 2015

In this paper, a broadband MIMO antenna using the metal cover that is one of the antenna radiators is designed and implemented on the PCB. The proposed antenna consists of a monopole and an IFA fed by the coupling structure and a metal cover radiator. Therefore, a monopole and an IFA with a metal cover radiator operate simultaneously through a hybrid form of operation. The antenna satisfies VSWR 3:1 at the bands of LTE class 13, class 14, CDMA, GSM900, DCS, PCS, WCDMA, LTE class 40 and WiFi. The maximum ECC of diagonally fed MIMO antenna is 0.186. The measured average gain and efficiency were -5.14~-1.28 dBi and 30.87~74.48 % over the desire bands, respectively.

• Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.198-204
• /
• 2018

Background: The effective use of habitats is essential for the successful adaptation of a species to the local environment. Although habitats exhibit a hierarchical structure, including macro-, meso-, and microhabitats, the relationships among habitats of differing hierarchy have not been well studied. In this study, we studied the quantitative measures of microhabitat use of Gekko japonicus from three field populations in Japan: one at Tsushima Island, one at Nishi Park, Fukuoka, and one at Ohori Park, Fukuoka. We investigated whether land cover type, a higher hierarchical habitat component, was associated with quantitative microhabitat use, a lower hierarchical component, in these populations. Results: The substrate temperature where we located geckos (SubT) and the distance from the ground to the gecko (Height) were significantly different among the three populations. In particular, SubT on Tsushima Island was lower than it was in the other two populations. Irradiance at gecko location and Height were significantly different among the land cover types. In particular, Height in evergreen needleleaf forest was significantly lower than that in deciduous broadleaf forest. Furthermore, significant interactions between population and land cover type were observed for the SubT and Height variables. Conclusions: The quantitative measures of microhabitat use of G. japonicus varied with population and land cover type, which exhibited significant interaction effects on microhabitat use variables. These results suggest that higher hierarchical habitat components can affect the quantitative measures of lower hierarchical microhabitat use in nocturnal geckos.

• Steel and Composite Structures
• /
• v.44 no.3
• /
• pp.437-450
• /
• 2022

When the vertical load-bearing members in high-rise structures fail locally, the beam-column joints play an important role in the redistribution of the internal forces. In this paper, a static laboratory test of three full-scale flush flange beam-reinforced connections with side and cover plates (CP-FBSP connection) with double half-span steel beams and single L-shaped columns composed of concrete-filled steel tubes (L-CFST columns) was conducted. The influence of the side plate width and cover plate thickness on the progressive collapse resistance of the substructure was thoroughly analyzed. The failure mode, vertical force-displacement curves, strain variation, reaction force of the pin support and development of internal force in the section with the assumed plastic hinge were discussed. Then, through the verified finite element model, the corresponding analyses of the thickness and length of the side plates, the connecting length between the steel beam flange and cover plate, and the vertical-force eccentricity were carried out. The results show that the failure of all the specimens occurred through the cracking of the beam flange or the cover plate, and the beam chord rotations measured by the test were all greater than 0.085 rad. Increasing the length, thickness and width of the side plates slightly reduced the progressive collapse resistance of the substructures. The vertical-force eccentricity along the beam length reduced the progressive collapse resistance of the substructure. An increase in the connecting length between the beam flange and cover plate can significantly improve the progressive collapse resistance of substructures.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.1
• /
• pp.170-191
• /
• 2024

The transmission of confidential data using cover media is called steganography. The three requirements of any effective steganography system are high embedding capacity, security, and imperceptibility. The text file's structure, which makes syntax and grammar more visually obvious than in other media, contributes to its poor imperceptibility. Text steganography is regarded as the most challenging carrier to hide secret data because of its insufficient redundant data compared to other digital objects. Unicode characters, especially non-printing or invisible, are employed for hiding data by mapping a specific amount of secret data bits in each character and inserting the character into cover text spaces. These characters are known with limited spaces to embed secret data. Current studies that used Unicode characters in text steganography focused on increasing the data hiding capacity with insufficient redundant data in a text file. A sequential embedding pattern is often selected and included in all available positions in the cover text. This embedding pattern negatively affects the text steganography system's imperceptibility and security. Thus, this study attempts to solve these limitations using the Part-of-speech (POS) tagging technique combined with the randomization concept in data hiding. Combining these two techniques allows inserting the Unicode characters in randomized patterns with specific positions in the cover text to increase data hiding capacity with minimum effects on imperceptibility and security. Format-preserving encryption (FPE) is also used to encrypt a secret message without changing its size before the embedding processes. By comparing the proposed technique to already existing ones, the results demonstrate that it fulfils the cover file's capacity, imperceptibility, and security requirements.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.5
• /
• pp.195-200
• /
• 2021

Due to the development of video sharing platforms, the amount of video uploads is exploding. Such videos often include various types of music, among which cover songs are included. In order to protect the copyright of music, an algorithm to find the original song of the cover song is essential. However, it is not easy to find the original song because the cover song is a modification of the composition, speed and overall structure of the original song. So far, there is no known effective algorithm for searching the original song of the cover song. In this paper, we propose an algorithm for searching the original song of the cover song using the inflection points of the melody line. Inflection points represent the characteristic points of change in the melody sequence. The proposed algorithm compares the original song and the cover song using the sequence of inflection points for the representative phrase of the original song. Since the characteristics of the representative phrase are used, even if the cover song is a song made by modifying the overall composition of the song, the algorithm's search performance is excellent. Also, since the proposed algorithm uses only the features of the inflection point sequence, the memory usage is very low. The efficiency of the algorithm was verified through performance evaluation.

• Journal of the Korean Mathematical Society
• /
• v.43 no.4
• /
• pp.691-701
• /
• 2006

In this paper, we construct a new exotic smooth 4-manifold X which is homeomorphic, but not diffeomorphic, to ${\mathbb{C}}\mathbb{P}^2{\sharp}13\overline{\mathbb{C}\mathbb{P}}^2$. Moreover the manifold X has vanishing Seiberg-Witten invariants for all $Spin^c$-structures of X and has no symplectic structure.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.109-112
• /
• 2002

So far, the closed-form Green's functions have been derived almost for th open microstrip structures. In the present study, closed-form Green's functions for a top-covered microstrip structure are derived. And an effect of top-cover is discussed in comparison with open structure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.799-800
• /
• 2009

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.369-372
• /
• 2007

about commercial business of car black box, mirror vision for car black box deal with analysis of Existing Car Black boxes in market to provide the objective information associated with surrounding scene of car instead of witness, we experimented on suitable structure of all direction to cover surrounding of car considering dead zone where can't see at short distance and realized simple structure of gathering scene using mirror and lens and by saving the number of camera and MUX of pre-circut