• 한국염색가공학회지
• /
• 제26권3호
• /
• pp.218-229
• /
• 2014

The wearing comfort of garment is governed by two kinds of characteristics such as moisture and thermal transport properties and mechanical properties of fabrics. The porosity influenced by yarn and fabric structural parameters is known as main factor for wearing comfort of garment related to the moisture and thermal transport properties. This study investigated effect of porosity of composite yarns to the moisture and thermal comfort properties of composite fabrics made of hollow composite DTY and ATY yarns. The theoretical porosity and pore size were inversely proportional to cover factor of fabric, but cover factor was not correlated with experimental pore size. The wicking property of hydrophobic PET filament fabric showed inferior result irrespective of porosity, pore size and cover factor. The drying rate was superior at composite fabrics with high pore size and low cover factor, and pore size was dominant factor for drying property. On the other hand, thermal conductivity of composite fabric was mainly influenced by cover factor and not influenced by porosity. Air permeability was influenced by both porosity and cover factor and was highly increased with increasing porosity and decreasing fabric cover factor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.227-231
• /
• 2004

Technological advance in information technology has sparked the necessity of small form factor (SFF) optical disk for mobile devices. Small form factor optical disk is highly anticipated to be a next generation storage device because it can be used for a cost-effective way compared with solid state memory. For the application to the 5 mm height small-form-factor optical disk drive, we have presented an optical flying head and swing arm actuator. In this study, we propose a small 1-axis actuator for compensating ficus error and SA due to the variation of cover-layer thickness in the cover-layered small optical disk. The main design issues of the 1-axis actuator are the realization of compact structure and the new support structure of the actuator: Finally, the compensating principle and performance of the 1-axis actuator will be explained.

• Computers and Concrete
• /
• 제3권2_3호
• /
• pp.145-161
• /
• 2006

This article involves architecting prototype-fuzzy expert system for designing the nominal cover thickness by means of fuzzy inference for quantitatively representing the environment affecting factor to reinforced concrete in chloride-induced corrosion environment. In this work, nominal cover thickness to reinforcement in concrete was determined by the sum of minimum cover thickness and tolerance to that defined from skill level, constructability and the significance of member. Several variables defining the quality of concrete and environment affecting factor (EAF) including relative humidity, temperature, cyclic wet and dry, and the distance from coast were treated as fuzzy variables. To qualify EAF the environment conditions of cycle degree of wet-dry, relative humidity, distance from coast and temperature were used as input variables. To determine the nominal cover thickness a qualified EAF, concrete grade, and watercement ratio were used. The membership functions of each fuzzy variable were generated from the engineering knowledge and intuition based on some references as well as some international codes of practice.

• 한국환경과학회지
• /
• 제17권5호
• /
• pp.485-491
• /
• 2008

The present study examined the relation between land cover condition and temperature in various types of urban green spaces. The diagram of temperature distribution showed that high-temperature zones are formed around paved areas, and low temperature zone around planted areas and grassy areas. Even in planted areas where low-temperature zones were formed, temperature was different according to hierarchical structure. That is, temperature was relatively low in areas covered with arbor + sub-arbor. With regard to land cover ratio, the increase of planted areas and grassy areas had an effect on the fall of temperature and the effect was higher in order of planted areas and grassy areas. On the contrary, paved areas and bare areas had an effect on the rise of temperature. According to the results of factor analysis, in case of the highest temperature, planted area and grassy area were put together into a factor lowering temperature, paved area and temperature into a factor raising temperature, and bare area alone into a factor of low significance. In case of the lowest temperature, grassy area and bare area were put together into a factor, and the validity of the factor analysis was proved by the analysis of urban heat islands. An increase in the number of trees by height was effective in lowering temperature, and the effect was high in order to arbor and sub-arbor, and the source of coldness in planted area was tall trees.

• 한국수자원학회논문집
• /
• 제38권1호
• /
• pp.59-71
• /
• 2005

빈번하게 발생하고 있는 산불은 산지유역에 과도한 토사유출 문제를 일으키고 있다. 산불 이후 산지사면에서 강우에 의한 토사유출은 지표식생인자에 의해 지배되며 지표식생은 시간의 경과에 따라 점차 회복되고 이는 토사유출을 저감시킨다. 본 연구에서는 민감도를 강우에너지에 대한 유출 및 토양침식량의 비로 정의하고, 지표인자 변화에 따른 유출 및 토양침식 민감도의 특성을 분석하였다. 그 민감도에 대한 매개변수들의 상관관계를 분석한 결과 지표식생지수와의 상관성이 가장 높았으며 지수함수적인 관계를 나타내었다. 산불이후 경과시간에 따른 민감도는 산불피해복구 대책공법과 산불의 강도 모두 적합한 감소 기울기를 보였다. 산불발생 년도에 따른 토양침식민감도의 변화에서는 산불발생 이후 약 5년이 경과하면 토양침식민감도 변화가 적어 안정적인 범위 이내로 접어드는 것이 확인되었다.

• 한국산림과학회지
• /
• 제107권1호
• /
• pp.50-58
• /
• 2018

본 연구는 눈개승마 피복이 토양유실 저감에 미치는 영향을 파악하고자, 눈개승마 피복지의 연토양유실량을 측정하였다. 또한 측정한 토양유실량을 바탕으로 RUSLE의 식생피복인자를 산정하였다. 산정한 식생피복인자와 토양유실 저감용으로 식재하는 츄잉훼스큐의 식생피복인자를 비교하여 눈개승마 피복이 토양유실 저감에 효과적인지 파악하였다. 피복종류에 따른 토양유실량은 눈개승마 피복시 2.22 Mg/ha, 츄잉훼스큐 피복시 1.85 Mg/ha, 일반 노지는 10.60 Mg/ha가 발생하였다. 피복 종류에 따른 식생피복인자는 눈개승마에서 $0.09{\pm}0.03$, 츄잉훼스큐에서 $0.08{\pm}0.03$, 일반 노지에서는 $0.35{\pm}0.10$로 나타났다. 나지에서는 $0.83{\pm}0.14$로 나타났다. 산정한 피복별 식생피복인자를 분산 분석한 결과는 피복종류에 따라 평균 값의 차이가 있었다. 사후분석을 통한 동일집단군을 분류한 결과 눈개승마와 츄잉훼스큐는 평균의 차이가 적은 유사집단으로 나타났다. 따라서, 눈개승마는 츄잉훼스큐에 비견될 정도로 토양유실 저감 효과가 있었다.

• 소성∙가공
• /
• 제15권1호
• /
• pp.76-81
• /
• 2006

In this study, warpage characteristics of mobile phone cover through injection molding process were investigated using design of experiments in injection molding process. Warpage in plastic injection molding has a significant effect on quality of product. Effects of injection time, packing pressure, packing time, mold temperature and melt temperature on the warpage of mobile phone cover were considered by numerical analysis and experiment with Taguchi method. The degree of warpage for the injection molded part was measured by using three dimensional coordinate measurement machine. It was shown that temperature control factor has more significant effect on the warpage of mobile phone cover than pressure control factor.

• 한국의류학회지
• /
• 제28권8호
• /
• pp.1057-1064
• /
• 2004

Silk, polyester, cotton, and wool fabrics were embroidered with varying stitch length of 3mm, 5mm, and 10mm to examine the difference in fabric shrinkage in terms of sewing direction, fabric thickness, cover factor, stitch length, and fiber type. Warp, filling, and bias direction of sewing resulted in no difference in fabric shrinkage. Within the samples with same stitch length, there was less fabric shrinkage in fabrics with higher fabric thickness or higher cover factor. There was larger shrinkage when sewn with longer stitch length. Comparing fabrics with different fiber types but similar fabric thickness, silk and polyester fabrics showed the smallest fabric shrinkage and wool fabrics showed the largest shrinkage. It is shown that similar fabric shrinkage between silk and polyester is due to the similarity in cover factor.

• 한국측량학회지
• /
• 제30권6_2호
• /
• pp.653-663
• /
• 2012

Using soft classification, it is possible to obtain the land cover proportions from the remotely sensed image. These land cover proportions are then used as input data for a procedure called "super-resolution mapping" to produce the predicted hard land cover layers at higher resolution than the original remotely sensed image. Superresolution mapping can be implemented using a number of algorithms in which the Hopfield Neural Network (HNN) has showed some advantages. The HNN has improved the land cover classification through superresolution mapping greatly with the high resolution data. However, the super-resolution mapping is based on the spatial dependence assumption, therefore it is predicted that the accuracy of resulted land cover classes depends on the relative size of spatial features and the spatial resolution of the remotely sensed image. This research is to evaluate the capability of HNN to implement the super-resolution mapping for SPOT image to create higher resolution land cover classes with different zoom factor.

• 한국태양에너지학회 논문집
• /
• 제30권3호
• /
• pp.1-9
• /
• 2010

Since the horizontal global radiation and cloud cover are a main factor for designing any solar photovoltaic system, it is necessary to evaluate its characteristics all over the country. The work presented here are the investigation of horizontal global radiation and cloud cover in Korea. The data utilized in the investigation consist of horizontal global radiation and cloud cover collected for 27 years(1982. 12~2008. 12) at measuring stations across the country. The analysis shows that the annual-average daily horizontal global radiation is $3.61\;kWh/m^2$ and the annual-average daily cloud cover is 5.1 in Korea. We also constructed the contour map of cloud cover in Korea by interpolating actually measured data across the country.