• Journal of Welding and Joining
• /
• 제32권2호
• /
• pp.54-62
• /
• 2014

Manhole cover, which is usually made of grey cast iron and consists of frame and cover, should have enough strength to support the heavy traffic load. The manhole cover made of cast iron has heavy weight to handle manually and is vulnerable to impact force with its brittle characteristics. Moreover, its production process of casting has been regulated in terms of environmental pollution. In this study, steel manhole cover is proposed to substitute the cast cover with a series of structural analyses to confirm its strength to support the test load for manhole cover. The cover of the proposed steel manhole cover is made of thin circular pate and stiffeners below the plate. Rectangular columns and hollow circular plate were selected for the shape of the stiffener. In order to give enough strength for the cover to behave within elastic range in the loading, strengthening structures of the cover were varied with increasing the number and the size of the stiffeners. The results of the analyses revealed that when both the hollow circular stiffener and cross stiffeners were additionally applied at the same time to the steel cover with longitudinal stiffeners, the maximum stress level in the cover could be reduced to that level presented in the cast cover.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.20-26
• /
• 2008

The nacelle cover and nosecone are made of composite materials, especially the stiffener is added in the nacelle cover in order to enhance it's stiffness. The nacelle cover consists of all three covers of left, right side cover and upper cover and each cover is connected with bolts. Also, the nacelle cover and nacelle frame are connected with bolts. The nacelle cover and nosecone have a important role to prevent the components of nacelle and rotor from external circumstances such as snow, rain and wind. Therefore, it is necessary to analyze and evaluate the strength and deformation for them in the design level. According to GL Wind Specifications, this paper shows the results that nacelle cover of 2MW wind turbine satisfy the strength and deformation throughout analysis using Patran/Nastran programs.

• 한국환경복원기술학회지
• /
• 제2권1호
• /
• pp.29-37
• /
• 1999

Land cover classification is an essential basic information in natural environment management; however, land cover classification studies in Korea have not yet been proceeded to a sufficient level. At the present, only a limited number of the precedent studies that only cover definite city area has been conducted. Furthermore, there is almost no research conducted on the land cover classification schemes that could accurately classify the Korea's land cover conditions. This study primarily focuses on the land cover classification scheme which carries the most urgent priority in order to classify and to map out the Korean land cover conditions. In order to develop the most suitable land cover classification scheme, many foreign land cover classification cases and projects that are being carried out were reviewed in depth. The land cover classification scheme this study proposes comprises 3 levels : The first level consists of 7 different classes; the second level consists of 22 different classes; and the third level is made up of 50 classes. The land cover classification map will serve many important roles in natural environment management, such as the conjecture of natural habitats and estimation of oxygen production or carbon dioxide absorption capability of a forest. In water pollution modelling, the land cover classification data can be used to estimate and locate non-point sources of water pollution. If applied to a watershed, modelling it will allow to estimate the total amount of pollution from non-point sources of pollution in the water shed. The land cover classification data will also be good as a barometer data that determines defusion of air pollutants in air pollution modelling.

• ALGAE
• /
• 제31권1호
• /
• pp.41-48
• /
• 2016

The clonal seaweed Chondrus crispus (Rhodophyta, Gigartinales) forms extensive stands at low intertidal elevations on wave-sheltered rocky shores of the North Atlantic. This study investigates if this bushy alga acts as a foundation species in such habitats. The abundance (percent cover) of C. crispus, all other algae, and invertebrates was measured in 390 quadrats spanning 350 km of coast in Nova Scotia, Canada. In these low-intertidal habitats, fucoid algae are the largest organisms and can form extensive canopies, but their cover was unrelated to benthic species richness and to C. crispus cover. Species richness, however, increased with C. crispus cover from low to intermediate cover values, showing little change towards full C. crispus cover. Species composition (a combined measure of species identity and their relative abundance) differed between quadrats with low (0-1%) and high (60-100%) cover of C. crispus. High C. crispus cover was associated to more invertebrate species but fewer algal species than low C. crispus cover. However, the average abundance of algal and invertebrate species occurring in both cover groups was often higher under high C. crispus cover, contributing to a higher average richness at the quadrat scale. Overall, only 16% of the observed variation in species richness was explained by C. crispus cover. Therefore, this study suggests that C. crispus acts as a foundation species but with a moderate influence.

• 환경정책연구
• /
• 제7권3호
• /
• pp.121-140
• /
• 2008

불투수면 비율은 유역의 건전성 정도를 나타내는 중요한 척도로 활용되고 있으며 특히 유역의 수환경 특성을 파악하는 모델에서 이용되어 왔다. 불투수면은 총불투수면과 유효불투수면의 두 가지 있으며, 이들은 각 유역의 토지이용 특성에 따라 그 구성이 다양하다. 이중 총 불투수면은 기존의 토지이용도나 토지피복도를 사용하여 손쉽게 구할 수 있는 반면 유효불투수면은 물 흐름을 필지별로 파악하여야 하기 때문에 산정에 많은 노력과 비용이 소요된다. 본 연구에서는 우리나라 사례지역에 대해 총불투수면과 유효불투수면을 산정하여 그 특성을 상호 비교해 보고 유역관리에 있어 유효 및 총 불투수면 비율의 적용방안을 모색하고자 하였다. 사례지역 분석결과 유효불투수면 면적은 39.7%로 총 불투수면 면적 43%에 비해 약 3%적었다. 불투수면이 수환경에 미치는 영향을 분석하기 위한 기초 자료로 활용하기 위함임을 고려할 때 비용과 시간적 측면에서 볼 때 총불투수면을 유역의 대표적인 불투수면 비율로 사용할 수 있을 것으로 판단된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1289-1291
• /
• 2003

Climatic characteristic and changes of snow cover over the Northern Hemisphere, Eurasian, North America and the Tibet Plateau are studied based on data of the Northern Hemisphere snow cover area observed by Satellite remote sensing from 1966 to 2003. Meanwhile, the seasons' distribution charts of the Asian snow cover are made, they provide the climatic background of snow cover. In addition, the influences of snow cover on the climate, especially on the monsoon are analysed briefly, and some significance results are concluded.

• 한국위성정보통신학회논문지
• /
• 제10권3호
• /
• pp.48-52
• /
• 2015

국내 및 국외 최초 대면적 TSP용 강화 Cover Glass Edge Grinding 공정을 개발하였다. 이를 위해 기존의 Cover Glass Grinding 공정에서 문제가 되고 있는 기술을 중점적으로 연구하여 해결하였고, 생산성 향상과 가공품질을 높이는데도 중점을 두어서 개발하였다. 개발 과정에서는 데모기기의 제작과 운영을 통해 전체 공정 기술을 개발하였다. 개발 결과 강화 Cover Glass Grinding 공정 기술, 영상처리기술, 기구 메카니즘 & 제어 알고리즘 확보하였다.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.183-189
• /
• 1997

In order to help develop more comfortable seat cover fabrics, this study primarily surveyed the actual using conditions and the consumers' opinions of the seat cover fabrics. The results of this study were as follows: 1) The colors of seat cover fabric were mostly achromatic. Regarding comsumers' satisfaction on the colors of seat cover fabric, comsumers in their 20's were less satisfied than other age groups. Most unsatisfied consumers prefered bright colors. 2) On the materials of seat cover fabric, synthethic leather and woven were most widely used. Real leather was most prefered due to its luxury and tactile sensation. Woven was secondarily prefered due to its price and tactile sensation. About fourty percent of consumers covered the seat with other cover fabrics because of soil and other reasons. It will be useful if they could choose and change the seat cover fabircs with different materials and colors. 3) When consumers used the seat cover fabrics, the problems that they indicated were not durability and colorfastness but low breathablity during sweating, static electricity, soil, firmness, and cool sensation at the first contact.

• 한국대기환경학회지
• /
• 제15권6호
• /
• pp.747-755
• /
• 1999

Effects of precipitation and cloud cover on high ozone days are examined by investigating the precipitation and average cloud cover before the ozone peak time within a day. High ozone days above 100 ppb in the Greater Seoul Area(GSA) for the ozone season from May to September are chosen for the analyses in terms of the surface meteorological data during 1990~1997. The result shows that the effect of precipitation on the rise of ozone concentration is definitely negative so that ozone concentration could not rise above 100ppb immediately after precipitation. But, the effect of cloud cover is associated with the variations of other meteorological parameters. The number of high ozone days with "zero" cloud cover is rather less than that with cloud cover of 1 to 4 since temperature is usually lower in "zero" cloud cover days. Furthermore, ozone concentration can rise above 100ppb even with full cloud cover when the wind is weak and the temperature is high.temperature is high.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1753-1755
• /
• 2003

MOF insulating cover used in 22.9 kV substation hasn't shown good performance in terms of electrical safety because of its defect by short clearance MOF cover and each input and output wire junction part. The MOF cover is easily moved by outside environment as wind or rain weather because of different size MOF cover and insulating busing, also can be leaded to breakdown by tracking. Therefore, we propose MOF cover which effectively prevents from electrical accidents in this paper. To decrease the electric field concentrated on specific part, we roundly design the shape of MOF cover and clearance between cover and live part was adjusted to be longer than before. The proposed MOF cover is evaluated by using the electric field solution program.