• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.91-95
• /
• 2002

본 연구에서는 LTCC(Low temperature co-firing ceramic) 기술을 기반으로 한 적층 공정을 이용하여 최근 시장 수요가 증가하고 있는 2.4 GHz ISM(Industral science and medical) 대역의 대역통과 필터를 제작하였다. 또한 제안된 설계방식은 2.0$\times$l.2$\times$0.8㎣ 사이즈의 초소형 필터의 구현이 가능케 하였다. λ/4 공진기의 한쪽에 부하 캐패시터를 적절히 형성시켜 공진기의 길이를 짧게 하는 효과와 더불어 공진기의 Q값과 저지대역 감쇄특성을 향상시킬 수 있었다. 제안된 필터는 결합 스트립 공진기의 커플링 계수와 외부단자 Q값을 요구 사양에 맞게 최적화하여 이를 3차원 구조로 설계되었다. 제작된 대역통과 필터는 시뮬레이션을 통한 설계값과 매우 유사한 경향성을 보여주었다.

• 한국염색가공학회지
• /
• 제17권6호
• /
• pp.1-10
• /
• 2005

Disperse dyes derived from heterocyclic compounds such as phenylindole, pyridone, diaminopyridine, and carbazole have been known to exhibit high light fastness and bathochromic shift compared to the coursponding aminoazobenzene. The synthetic method to obtain diaminopyridine derivatives, which can be used as coupling components, was chlorination of pyridone with phosphorous oxychloride, followed by substitution with various primary amines. Four azo disperse dyes were synthesized by coupling four diaminopyridines with 2-cyano-4-nitroaniline as a diazo component. Structures of these dyes were confirmed by $^1H$ NMR spectroscopy. The wavelengths of maximum absorption of the synthesized disperse dyes were in the range of $517\~528nm$, and molar extinction coefficients were $45,700\~50,100$. The dyeability of four disperse dyes toward PET fiber was generally good. Wash and rubbing fastnesses were excellent, while light and dry heat fastness were good.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.154-164
• /
• 2019

A rotor dynamic analysis is mandatory for stability and design optimization of submerged propellers and turbines. An accurate simulation requires a proper consideration of fluid-induced reaction forces. This paper presents a bi-directional coupling of a bond graph method solver and an unsteady vortex lattice method solver where the former is used to model the rotor dynamics of the power train and the latter is used to predict transient hydrodynamic forces. Due to solver coupling, determination of hydrodynamic coefficients is obsolete and added mass effects are considered automatically. Additionally, power grid and structural faults like grid fluctuations, eccentricity or failure could be investigated using the same model. In this research work a fast, time resolved dynamic simulation of the complete power train is conducted. As an example, the rotor dynamics of a tidal stream turbine is investigated under two inflow conditions: I - shear flow, II - shear flow + water waves.

• 한국해양공학회지
• /
• 제30권2호
• /
• pp.84-90
• /
• 2016

In this study, a six degree-of-freedom motion analysis of a wind-wave hybrid platform equipped with numerous wave energy converters (WECs) was carried out. To examine the effect of the WECs on the platform, an analysis of one-way coupling was carried out, which only considered the power take-off (PTO) damping of the static WECs on the platform. The equation of motion of a floating platform with mooring lines in the time domain was established, and the responses of the one-way coupled platform were then compared with the case of a platform without any coupling effects from the WECs. The hydrodynamic coefficients and wave exciting forces were obtained from the 3D diffraction/radiation pre-processor code WAMIT based on the boundary element method. Then, an analysis of the dynamic responses of the floating platform with or without the WEC effect in the time domain was carried out. All of the dynamics of a floating platform with multiple wind turbines were obtained by coupling FAST and CHARM3D in the time domain, which was further extended to include additional coupled dynamics for multiple turbines. The analysis showed that the PTO damping effect on platform motions was negligible, but coupled effects between multiple WECs and the platform may differentiate the heave, roll, and pitch platform motions from the one without any effects induced by WECs.

• 전자공학회논문지D
• /
• 제36D권7호
• /
• pp.80-91
• /
• 1999

흡수 회절결자를 가지는 복소결합 다중양자우물 구조의 DFB 레이저가 작은 문턱이득, 좋은 변조 특성 그리고 작은 선폭계수를 보이며 또한 큰 제작 공차를 가지는 최적의 복소 회절격자 구조를 보였다. 이러한 구조를 찾기 위해 확장된 새로운 층 방법을 사용하여 복소 결합계수와 복소결합계수비를 계산하였으며 흡수 회절격자 층에서의 모달 손실을 포함하는 문턱이득을 직각사각형과 사다리꼴 회절격자에 대하여 계산하였다. 제안된 여러 구조에 대한 계산 결과의 비교를 통하여 작은 문턱이득과 큰 제작 공차를 얻기 위한 설계 지침을 얻었다. 제안된 여러 구조 중에서 이중 회절격자 층 방법을 이용한 구조중 흡수 회절격자가 윗층에 있는 구조가 복소 결합계수의 크기와 문턱이득에 대한 제작 공차가 가장 컸다. 복소결합계수비에 대한 제작 공차는 모든 구조에서 매우 큰 값을 가지고 있어 회절격자 설계시 중요한 고려 대상이 아님을 볼 수 있었다.

• 전자공학회논문지D
• /
• 제36D권5호
• /
• pp.88-98
• /
• 1999

레이저의 종축방향으로 회절격자층을 형성하는 위쪽 클래딩 층의 가운데 부분의 굴절률을 양 옆부분과 다르게 하여 유효위상천이 효과를 넓은 영역에서 얻는 refractive index midulated (RIM) DFB 레이저를 제안한다.RIM-DFB 레이저는 SHB 효과를 줄이기 위하여 기존에 제안되었던 회절격자의 주기를 변화시켜 넓은 영역에 걸쳐서 유효 위상 천이를 주는 corrugation pitch modualtion (CPM) 방법과 레이저의 종축 방향으로 결합계수를 달리하여 주는 distributed coupling coefficients (DCC) 방법의 효과를 동시에 얻을 수 있는 실현 가능한 구조이다. 급격한 위상천이가 없기 때문에 광자밀도분포가 균일해져 SHB 효과가 줄어 들게 되며 레이저 공진기 가운데 부분의 결합계수가 양 옆 부분의 결합계수보다 커서 분포결합계수의 효과를 주기 때문에λ/4 위상천이 레이저와 CPM-DFB 레이저에 비해 고출력에서 좋은 단일 모드 특성을 보인다. 그리고, 굴절률이 다른 가운데 부분의 길이가 RIM-DFB 레이저의 동작특성에 미치는 영향에 대하여 연구하였다.

• 한국전자파학회논문지
• /
• 제18권6호
• /
• pp.620-628
• /
• 2007

H 섹터 혼 안테나는 일정한 빔 커버리지를 가지면서 빔 조향을 하는 광대역 위상 배열 송신기의 복사 소자로 유용하다. 본 논문에서는 상호 결합을 이용하여 3:1 주파수 대역과 ${\pm}60^{\circ}$의 빔 조향 범위를 갖는 광대역 E-면 H 섹터 혼 위상 배열 안테나를 설계하였다. 주자계면에서 반전력 빔 폭이 $30{\sim}50^{\circ}$을 갖는 H 섹터 혼 안테나를 설계하였다. 도파관 시뮬레이터를 이용하여 상호 결합을 포함하는 능동 반사 계수를 계산하였고, 광대역 주파수 범위에서 상호 결합에 의하여 능동 반사 특성이 개선되었다. 이러한 결과를 이용하여 $8{\times}1$ H 섹터 혼 위상 배열안테나를 제작하였다. 주자계면에서의 반전력 빔 폭과 능동 반사 계수의 측정 결과는 시뮬레이션 결과와 잘 일치하였다. 빔 조향된 복사 빔들의 첨두치 패턴은 능동 소자 패턴과 잘 일치하였다. 3:1 주파수 대역과 빔 조향 범위에서 능동 반사 계수는 대부분 0.3 이하로 측정되었다.

• 한국소음진동공학회논문집
• /
• 제18권10호
• /
• pp.1082-1090
• /
• 2008

In this paper, a general solution for the vibrational energy and intensity distribution through a compliant and dissipative joint between plate structures is derived on the basis of energy flow analysis (EFA). The joints are modeled by four sets of springs and dashpots to show their compliancy and dissipation in all four degrees of freedom. First, for the EFA, the power transmission and reflection coefficients for the joint on coupled plate structures connected at arbitrary angles were derived by the wave transmission approach. In numerical applications, EFA is performed using the derived coefficients for coupled plate structures under various joint properties, excitation frequencies, coupling angles, and internal loss factors. Numerical results of the vibrational energy distribution showed that the developed compliant and dissipative joint model successfully predicted the joint characteristics of practical structures vibrating in the medium-to-high frequency ranges. Moreover, the intensity distribution of a compliant and dissipative joint is described.

• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.181-202
• /
• 1999

Dynamic response of axisymmetric arbitrary laminated composite cylindrical shell of finite length, using three-dimensional elasticity equations are studied. The shell is simply supported at both ends. The highly coupled partial differential equations are reduced to ordinary differential equations (ODE) with variable coefficients by means of trigonometric function expansion in axial direction. For cylindrical shell under dynamic load, the resulting differential equations are solved by Galerkin finite element method, In this solution, the continuity conditions between any two layer is satisfied. It is found that the difference between elasticity solution (ES) and higher order shear deformation theory (HSD) become higher for a symmetric laminations than their unsymmetric counterpart. That is due to the effect of bending-streching coupling. It is also found that due to the discontinuity of inplane stresses at the interface of the laminate, the slope of transverse normal and shear stresses aren't continuous across the interface. For free vibration analysis, through dividing each layer into thin laminas, the variable coefficients in ODE become constants and the resulting equations can be solved exactly. It is shown that the natural frequency of symmetric angle-ply are generally higher than their antisymmetric counterpart. Also the results are in good agreement with similar results found in literatures.

• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.104-114
• /
• 1995

Mathematical models of industrial robots or manipulators are composed of highly nonlinear equations with nonlinear couplings between the variables of motions. These nonlin- earities were not considered important in the first stage that the working speed of the manipulator was not so fast, but the effect of nonlinear forces has become serious, as the working speed has been increased. So more improvement of performance cannot be expected by the control of manipulator using approximate linearization. As an approach for solving these problems, there is a method that eliminates nonlinear theory, which makes possible cecoupling of coupling terms and arbitrary arranging of poles is briefly introduced in this study. When the theory is applied to design the control law, its feasibility is examined whether the reasonable control results are obtained by simulating position, velocity, torque and tracing trajectory. The relations between the coefficients of the linearized differential equations and the maximum error and torque for the prescribed trajectory are also examined. Finally, the method for selecting the values for getting the most rapid and precise response within maximum torque of each drive is suggested in the choice of coefficients of characteristic equations which are obtained as a result of the control.