• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.3-7
• /
• 1994

In this study, to improve sintering condition, anisotropic Property(k$\_$t//k$\_$p/) of electromechanical coupling coefficients, and hydrostatic piezoelerlric constants d$\_$h/ and g$\_$h/, MnO$_2$impurity was added to the (Pb$\_$0.76/Ca$\_$0.24)[(Co$\_$$\frac{1}{2}$W$\_$$\frac{1}{2}$/)$\_$0.04/Ti$\_$0.96/]O$_3$ System ceramics for hydrophone. And the structural, electrical properties of them were investigated. As a results. tetragonality was decreased with MnO$_2$ additives and density was the highest value of 7.06(g/㎤) at H2-3 specimen. Electromechanical coupling coefficients of H2-3 specimen were k$\_$t/=49 and k$\_$p/ 0, which exibited the hightest hydrostatic piezoelectric constants of d$\_$h/=64.52[10$\^$-1/C/N] and g$\_$h/=35.92[10$\^$-3/ Vm/N].

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.569-577
• /
• 2020

Based on laboratory experiments and numerical simulations, the scale effect of Internal Solitary Wave (ISW) loads on spar platforms is investigated. First, the waveforms, loads, and torques on the spar model at a laboratory obtained by the experiments and simulations agree well with each other. Then, a prototype spar platform is simulated numerically to elucidate the scale effect. The scale effect for the horizontal forces is significant owing to the viscosity effect, whereas it is insignificant and can be neglected for the vertical forces. From the similarity point of view, the Froude number was the same for the scaled model and its prototype, while the Reynolds number increased significantly. The results show that the Morison equation with the same set of drag and inertia coefficients is not applicable to estimate the ISW loads for both the prototype and laboratory scale model. The coefficients should be modified to account for the scale effect. In conclusion, the dimensionless vertical forces on experimental models can be applied to the prototype, but the dimensionless horizontal forces of the experimental model are larger than those of the prototype, which will lead to overestimation of the horizontal force of the prototype if direct conversion is implemented.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1626-1631
• /
• 2007

This paper presents a new modeling method using lamp output power and the modeling coefficients of the lamp. The proposed method utilizes the lamp modeling coefficients such as equivalent impedance Z(p), coupling coefficient of the transformer k(p), turns ratio of the transformer n(p), and plasma resistance Rp(p) as a function of lamp output power. The equivalent impedance Z(p) was developed from the equivalent resistance Req(p) and equivalent inductance Leq(p) of the lamp. Simulation and experimental results of the proposed model are presented in order to validate the proposed method. The modeling method can use to design an impedance matching circuit for a Class-D inverter.

• Smart Structures and Systems
• /
• 제20권3호
• /
• pp.273-283
• /
• 2017

This paper presents and compares three feedback control strategies for active control of noise inside a 3-D vibro-acoustic cavity. These are a) control strategy based on direct output feedback (DOFB) b) control strategy based on linear quadratic regulator (LQR) to reduce structural vibrations and c) LQR control strategy with a weighting scheme based on structural-acoustic coupling coefficients. The first two strategies are indirect control strategies in which noise reduction is achieved through active vibration control (AVC), termed as AVC-DOFB and AVC-LQR respectively. The third direct strategy is based on active structural-acoustic control (ASAC). This strategy is an LQR based optimal control strategy in which the coupling between the various structural and the acoustic modes is used to design the controller. The strategy is termed as ASAC-LQR. A numerical model of a 3-D rectangular box cavity with a flexible plate (glued with piezoelectric patches) and with other five surfaces treated rigid is developed using finite element (FE) method. A single pair of collocated piezoelectric patches is used for sensing the vibrations and applying control forces on the structure. A comparison of frequency response function (FRF) of structural nodal acceleration, acoustic nodal pressure, and piezoelectric actuation voltage is carried out. It is found that the AVC-DOFB control strategy gives equal importance to all the modes. The AVC-LQR control strategy tries to consume the control effort to damp all the structural modes. It is seen that the ASAC-LQR control strategy utilizes the control effort more intelligently by adding higher damping to those structural modes that matter more for reducing the interior noise.

• 한국전자파학회논문지
• /
• 제23권5호
• /
• pp.598-605
• /
• 2012

본 논문에서는 이중 모드 공진기 간의 개구 결합을 이용한 적층형 이중 대역 대역 통과 여파기를 제안하였다. 이중 모드 공진기 사이에 위치한 두 개의 개구를 통해 두 개의 결합 경로가 형성된다. 이를 이용하여 공진기의 모양에 변형을 주지 않고 개구의 크기 조절만으로 결합량을 조절할 수 있다. 또한, 이중 모드 공진기의 스터브 사이의 개구를 이용하여 두 번째 대역의 대역폭을 첫 번째 대역에 영향을 주지 않으면서 추가적으로 조절할 수 있다. 개구를 통한 결합 방법에 대해 이론적인 해석을 하였다. 제안된 구조를 이용하여 2.4 GHz WLAN, 3.5 GHz WiMax에서 동작하는 여파기를 설계 및 제작하였다. 제작된 여파기는 각각 2.45 GHz, 3.5 GHz의 중심을 기준으로 9 %, 8 %의 대역폭을 갖는다.

• 한국광학회지
• /
• 제23권1호
• /
• pp.23-31
• /
• 2012

본 논문에서는 근적외선(NIR, near-infrared) 영역의 레이저 광원 및 광검출기를 이용한 주파수영역(frequency-domain) 확산 광이미징(DOI, diffuse optical imaging) 시스템을 구현하였다. 검출신호의 진폭 및 위상 추출에는 70MHz의 단일 변조주파수를 사용하는 호모다인(homodyne) 검출기법을 적용하였으며, 4개의 검출기를 이용해 동시측정이 가능하도록 시스템을 최적화하였다. 각 검출기들이 서로 다른 결합계수(coupling coefficient)를 가짐으로써 발생하는 진폭 및 위상의 편차를 보정하였다. 본 논문에서 제작한 DOI 시스템을 이용하여, 생체조직을 모사한 액체팬텀에 이형성분(anomaly)을 삽입하여 흡수 및 산란 분포에 대한 영상을 복원함으로써 이형성분의 위치 및 광학적 특성에 대한 정보를 획득하였으며, 단일 광검출기를 사용하는 순차적인 측정에 의한 결과보다 영상복원 성능이 개선되었음을 보였다. 또한, 동일한 액체팬텀에 대해서, 측정위치를 이동해가며 각 단층 슬라이스에 대한 흡수계수 및 산란계수 분포영상을 복원함으로써 구현된 시스템을 이용해 단층촬영이 가능함을 보였다.

• Wind and Structures
• /
• 제28권1호
• /
• pp.1-17
• /
• 2019

Internal ring beams are primary components of new ring-stiffened cooling towers. In this study, numerical simulation of the internal flow field of a cooling tower with three ring beams under wind-thermal coupling effect is performed. The studied cooling tower is a 220-m super-large hyperbolic indirect natural draft cooling tower that is under construction in China and will be the World's highest cooling tower, the influence of peripheral radiators in operating cooling tower is also considered. Based on the simulation, the three-dimensional effect and distribution pattern of the wind loads on inner surface of the cooling tower is summarized, the average wind pressure distributions on the inner surface before and after the addition of the ring beams are analyzed, and the influence pattern of ring beams on the internal pressure coefficient value is derived. The action mechanisms behind the air flows inside the tower are compared. In addition, the effects of internal ring beams on temperature field characteristics, turbulence kinetic energy distribution, and wind resistance are analyzed. Finally, the internal pressure coefficients are suggested for ring-stiffened cooling towers under wind-thermal coupling effect. The study shows that the influence of internal stiffening ring beams on the internal pressure and flow of cooling towers should not be ignored, and the wind-thermal coupling effect should also be considered in the numerical simulation of cooling tower flow fields. The primary conclusions presented in this paper offer references for determining the internal suction of such ring-stiffened cooling towers.

• 전자공학회논문지D
• /
• 제35D권9호
• /
• pp.93-99
• /
• 1998

수직 방향성결합기 구조에서 결합파장 및 결합분포를 달리하는 결합기 4개를 포함하는 헙대역 파장역다중기를 제안하고 동작특성을 모의실험 하였다. 너비가 다른 네 개의 ridge 광도파로를 동일한 strip상에 집적하여 수직결합시킴으로써 각각의 ridge 광도파로가 개별 파장여과기로 동작한다. 각 채널에서 발생하는 부엽(side-lobe)을 억제하기 위해 두 광도파로 간의 결합계수를 광파 진행방항으로 변화시켰다. 모의실험 결과 1.55 ㎛ 중심파장 대역에서 채널간격은 7 nm 이고 각 채널은 1.7 nm의 3-dB 통과대역폭, 20dB의 부엽억제비 및 약 90%의 광전력 전달효율을 보이면서 각 채널이 균일한 광여과 응답특성을 나타냄을 알 수 있었다.

• Ocean Systems Engineering
• /
• 제3권4호
• /
• pp.275-294
• /
• 2013

Side-by-side offloading operations are widely utilized in engineering practice. The hydrodynamic interactions between two vessels play a crucial role in safe operation. This study focuses on the coupled effects between two floating bodies positioned side-by-side as a shuttle tanker-FPSO (floating production, storage and offloading) system. Several wave directions with different side-by-side distances are studied in order to obtain the variation tendency of the horizontal hydrodynamic coefficients, motion responses and mean drift forces. It is obtained that the coupled hydrodynamics between two vessels is evidently distinguished from the single body case with shielding and exaggerating effects, especially for sway and yaw directions. The resonance frequency and the peak amplitude are closely related with side-by-side separation distance. In addition, the horizontal hydrodynamics of the shuttle tanker is more susceptible to coupled effects in beam waves. It is suggested to expand the gap distance reasonably in order to reduce the coupled drift forces effectively. Attention should also be paid to the second peaks caused by hydrodynamic coupling. Since the horizontal mean drift forces are the most mainly concerned forces to be counteracted in dynamic positioning (DP) system and mooring system, prudent prediction is beneficial in saving consumed power of DP system and reducing tension of mooring lines.

• 전력전자학회논문지
• /
• 제8권5호
• /
• pp.407-417
• /
• 2003

비접촉식 충전기에 사용되는 변압기는 비교적 큰 공극으로 인해 낮은 결합계수를 가지므로 전력전달 능력이 떨어진다. ㄷ ㅓ 형 코어로 비접촉식 충전기용 변압기를 만들면 표준형의 EE, EC, UU 코어로 만든 변압기에 비해 높은 결합계수를 얻을 수 있다. 본 논문에서는 ㄷ ㅓ 형 코어로 만든 변압기의 특성을 연구하였다. 누설 인덕턴스와 여자 인덕턴스가 미치는 영향을 정현파 구동이나 구형파 구동을 통하여 분석하였고 코어에 따른 전력 전달 특성을 비교하였다. 분석의 타당함을 확인하기 위하여 ZVS 변환기에 삽입하여 그 동작을 확인하였다. 본 논문에 사용된 분석과 비교하는 방법은 공극이 큰 PCB 변압기 등에도 적용할 수 있다.