• 대한전자공학회논문지TC
• /
• 제49권2호
• /
• pp.39-49
• /
• 2012

병렬 스터브를 이용하여 개구면 결합 마이크로스트립 패치 안테나 (ACMPA)의 임피던스 대역폭을 넓히는 방법에 대해 연구하였다. H-모양의 개구면을 가지는 일반적인 ACMPA를 설계하고 등가회로의 전기적 파라미터를 추출하였다. 급전선로에 병렬 스터브를 삽입하여 ACMPA의 임피던스 대역폭을 확장시키는 방법을 제시하였다. 병렬 스터브를 삽입한 ACMPA의 -10dB 임피던스 대역폭은 최대 약 14 %로 일반적인 ACMPA의 최대 임피던스 대역폭 5.4 %와 비교하여 대역폭이 약 160 % 증가함을 볼 수 있었다.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.13-19
• /
• 2017

In this paper, study of vehicle fire cases caused by connector and power wiring of anti-lock brake system(ABS) module damage is presented. The purpose of ABS module is to improve braking and steering ability under sudden stop of the vehicle by repeatedly activating and releasing the brake with electric signal via electric control unit. The electric control unit for ABS may experience incomplete contact between power line and signal line or electrical breakdown on the printed circuit board by undergoing repetitive signal change which would consequently result in electrical heat and spark, eventually leading to automotive fire. Therefore, the purpose of this paper is to provide fundamental data by analyzing connector and power wiring of ABS module damage conducive to the precise investigation on the cause of vehicle fire.

• 한국정보통신학회논문지
• /
• 제9권4호
• /
• pp.792-797
• /
• 2005

본 논문에서는 전력선 통신과 조광 기술을 기반으로 에너지 절약과 적정 조도의 제어가 가능한 조명제어 스위치의 개발에 대하여 기술하였다. 개발된 스위치는 범용의 마이크로프로세서와 주변 전자기술을 이용하며, 하나의 마이크로프로세서로 전력선 통신과 조광기능을 구현함으로서 저가격 상용화가 가능하였다. 캐리어 주파수는 전송 데이터 길이와 신호감쇄를 고려하여 250kHz로 설정하였다. 저압선로에서 시제작품에 대한 시험결과, 본 스위치는 전력선의 길이와 부하용량의 변동에 대해 강인하게 동작하는 것을 확인하였다.

• 한국통신학회논문지
• /
• 제14권6호
• /
• pp.579-589
• /
• 1989

K-밴드 또는 밀리터리파 대역에서 모노리딕 및 하이브리드 기판에 Surface Mounting에 의해 제작될 수 있는 여러가지 planar power divider/combiner를 CAD에 의해 최적조건으로 설계하고 그 결과를 비교 검토하였다. CAD를 위한 소프트웨어는 Supercompact를 이용하였으며 기존의 Wilkinson divider를 각 branch사이의 고주파 결합을 감소 시킬 수 있도록 수정하여 해석하였고, 또한 $2^n$-way power dividet/combiner에 있어 그 출력 임피던스가 잘 정합되지 못함에 따른 입력 반사계수의 sensitivity를 감소시키는 방법에 대하여 연구하였다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제7권1호
• /
• pp.99-107
• /
• 2001

본 논문에서는 내장 메모리 테스트를 위해 메모리 테스트 알고리즘인 10N March 테스트 알고리즘을 회로로 구현하였으며, 구현된 내장 메모리 BIST 회로를 제어하기 위해 IEEE 1149.1 표준안을 회로로 구현하였다. 구현된 내장 메모리 테스트 회로는 워드 단위의 메모리를 위한 변경 데이터를 이용함으로써 워드 단위 메모리의 고착 고장, 천이 고장, 결합 고장을 완전히 검출할 수 있다. 구현된 회로는 Verilog-HIDL을 이용하여 구현하였으며, Synopsys에서 합성하였다. 합성된 메모리 테스트 회로와 IEEE 1149.1 회로의 검증은 메모리 컴파일러에 의해 생성된 메모리 셀과 VerilogXL을 이용하여 수행하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1992년도 추계학술대회
• /
• pp.117-122
• /
• 1992

In systems in which inductive coupling between a pancake-shaped coil on the surface of the body and a similar coil within the body is utilized for the transfort of electromagnetic energy, the minimization of temperature rise in the tissue is intimately related to the achievement of minimum losses in the region of the implanted coil. The new class of amplifiers, named "class E", for inverter is defined and is illustrated by a detailed description and a set of desist equations for one simple member of the class. For TET circuit the authors measured 65 to 76 percent efficiency at 1985kHz at 30 to 50 W output from IRF250 MOSFET transistor.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.195-195
• /
• 2010

In recent years, Anodic aluminum oxide(AAO) has become popular and attractive materials. It can be easily fabricated and self-organized pore structures. It has been widely used as a biosensor membrane, photonic crystal for optical circuit and template for nanotube growth etc. In previous papers, the theory was developed that AAO shows anisotropic optical properties, since it has anisotropic structure with numerous cylindrical pores. It gives rise to the anisotropy of the refractive index called as birefringence. It can be used as conventional polarizing elements with high efficiency and low cost. Therefore, we would like to compare the theory and experimental results in this study. One method which can measure effective refractive index of thin film is the prism coupling technique. It can give accurate results fast and simply. Furthermore, we can also measure separately the refractive index with different polarization using polarization of the laser (TE mode and TM mode). We calculated the effective refractive index with effective medium approximations (EMAs) by pore size in the SEM image. EMAs are physical models that describe the macroscopic system as the homogeneous and typical method of all mean field theories.

• 한국소음진동공학회논문집
• /
• 제15권2호
• /
• pp.161-168
• /
• 2005

The absorbing material is mostly used to changing the acoustic energy to the heat energy in the passive control, and that consists of the porous media. That controls an air borne noise while the stiffened plates, damping material and additional mass control a structure borne noise. The additional mass can decrease the sound by mass effect and shift of natural frequency, and damping material can decrease the sound by damping effect. The passive acoustic control using these kinds of control materials has an advantage that is possible to control the acoustic in the wide frequency band and the whole space at a price as compared with the active control using the various electronic circuit and actuator. But the space efficiency decreased and the control ability isn't up to the active control. So it is necessary to maximize the control ability in the specific frequency to raise the capacity of passive control minimizing the diminution of space efficiency such an active control. Therefore, the characteristics of control materials and the optimum layout of control materials that attached to the boundary of structure-acoustic coupled cavity were studied using sequential optimization on this study.

• 한국소음진동공학회논문집
• /
• 제16권2호
• /
• pp.183-189
• /
• 2006

In mobile phones of multimedia era, microspeakers of high qualify sound are essential parts to generate human voice in speaker phone and MP3 song player. In this paper, two types of microspeakers, outer permanent magnet (PM) and combined PM type, are analyzed using electromagnetic, mechanical and their coupling analysis. For performance comparison, voice coil diameter is chosen as a design parameter to change excitation position and magnet volume for both types. For combined PM type, sound pressure level (SPL) is improved due to increased PM volume compared to outer PM type. Also, with the decreased voice coil diameter for combined PM type, the 1st resonant mode of the diaphragm is more efficiently excited due to concentrative excitation, resulting in lower and broader frequency range. Therefore, it can be said that the combined PM type microspeakers are more advantageous for high performance microspeaker which are essential for multimedia era.

• 한국레이저가공학회지
• /
• 제8권1호
• /
• pp.9-18
• /
• 2005

The laser direct writing method using a UV Argon-ion laser is studied for fabrication of waveguide. The laser direct writing system is constructed with a vision camera, a xy-stage, a motion controller and the delivery components of a laser beam. The UV Argon-ion laser has wavelength range of $333.6\~363.8$ nm. A photo-active UV curable polymer for a planar light-wave circuit(PLC) of single mode is used. This polymer is irradiated by Argon-ion laser and developed by a solvent after a post-baking. The optimum laser direct writing condition is obtained experimentally by changing various process parameters such as laser power, writing speed and focal length. The propagation and coupling loss of a optical waveguide was measured as 1dB/cm and 0.6dB/cm, respectively. Also, the minimum width of waveguide of $100{\mu}m$(ZPLW-207) is obtained. Finally, the waveguides of line, bend and branch type are successfully fabricated.