• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.9
• /
• pp.651-657
• /
• 2003

We have demonstrated an in-line polarization splitter based on a side-polished fiber coupler including a thin metal intermediate layer. The experimental results revealed that the metal layer with proper thickness prevents TE polarization component from optical coupling between two contacted side-polished fibers, whereas it allows TM polarization component to the coupling. The design and fabrication techniques about the polarization splitter exploiting the side-polished fibers have been presented. The fabricated polarization splitter exhibited 18dB and 23dB of isolation ratio for TE polarization and TM polarization, respectively. The measured insertion loss for TE and TM polarization was 0.7dB and 1.3dB, respectively.

• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.514-524
• /
• 2017

We proposed an integrated wavelength-selective photodetector based on a grating-assisted contradirectional coupler and a graphene absorption layer for a coarse wavelength division multiplexing (CWDM) communication system. The center wavelength of the absorption spectrum of the proposed device can be tuned simply by changing the period of the grating, and the proposed device structure is suitable to forming a cascaded structure. Therefore, an array of the proposed device of different grating periods can be used for simultaneous wavelength demultiplexing and signal detection in a CWDM communication system. Our theoretical study showed that the designed device with a grating length of $500{\mu}m$ could have an absorption of 95.1%, an insertion loss of 0.2 dB, and a 3 dB bandwidth of 7.5 nm, resulting in a -14 dB crosstalk to adjacent CWDM channels. We believe that the proposed device array can provide a compact and economic solution to receiver implementation in the CWDM system by combining functions of wavelength demultiplexing and signal detection.

• International Journal of Advanced Culture Technology
• /
• v.7 no.1
• /
• pp.225-230
• /
• 2019

In order to improve performance for the size of the rat-race ring coupler, the CCL is used for the realization as the delay line. As realizing lower coupling coefficient, the ratio of the size-reduction for the CCL is enhanced. The CCL is alternated with ${\lambda}_g/4$ of the rat-race ring, and optimized two CCLs are inserted for the size-reduction. the coupling coefficient is 0.2, and electrical lengths of each CCL are $28.2^{\circ}$ and $21.7^{\circ}$. Designed rat-race ring using the CCL has the size of $18.76{\times}20.45mm^2$ and the size-reduction ratio of fabricated rat-race ring using the CCL has 76.8%. Also, fabricated rat-race ring is measured the insertion loss of 3.20dB at the center frequency of 2.45GHz and the 20dB bandwidth is 24.04%. Differenced magnitude and phase between threw port and coupled port are measured 0.1dB and $177.4^{\circ}$, respectively. These performances are almost same compared with the conventional rat-race ring. Suggested application of the CCL can be used various devices and circuits for the size-reduction.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.411-412
• /
• 2008

The high performance 94 GHz MMIC(Monolithic Micro-wave Integrated Circuit) single balanced mixer was designed and fabricated, using MHEMT structure based diodes and a CPW(Coplanar Waveguide) tandem coupler. A novel single-balanced structure of diode mixer is proposed in this work, where a 3-dB tandem coupler with two section of parallel-coupled line. Implemented air-bridge crossover structures achieve wide frequency operation and the fabricated mixer exhibits excellent LO-RF isolation, larger than 30 dB, in the 5 GHz bandwidth of 91-96 GHz. A good conversion loss of 7.4 dB is measured at 94 GHz. The proposed MHEMT-based diode mixer shows superior LO-RF isolation and conversion loss to those of the W-band mixers reported to date.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.170-175
• /
• 2010

This article proposed polarization selective antenna for UHF RFID system. The proposed antenna is consist of microstrip patch antenna with dual feeding and two SPDT switches and a SP4T switch and 3dB hybrid coupler. Through control of voltage of switches, the proposed reader antenna can select horizontally linear polarization, vertically linear polarization, left-hand circular polarization (LHCP) and right hand circular polarization (RHCP). The proposed reader antenna satisfied 2:1 VSWR at 902MHz ~ 928MHz. and 3dB under AR(axial ratio). And it can select appropriative polarization with user environment and tag polarization. So it minimize PLF and increased reading distance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.674-681
• /
• 2000

We proposed polymer based vertical asymmetric optical coupler. And we optimized the proposed device by coupling characteristic analysis In 1.33um wavelength, TE mode, we obtained very short coupling length(L=277.6um), high coupling efficiency(94%). The merits of proposed device are low propagation loss due to very short full device, low production cost and time, and high integrated fabrication. We will use this to fabricate optical switch, modulator and tunable WDM devices, etc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1335-1340
• /
• 2003

In this paper, a single balanced diode Mixer for the homodyne FMCW radar to detect distance and velocity of a vehicle target is designed and implemented using a microstrip line and two schottky barrier beam lead diodes. This mixer is optimally designed to have less a conversion loss within the 100 MHz bandwidth with a little LO injection power and a higher LO isolation as soon as possible through the embedded electrical length of microsrtrip line placed between the coupler and diode matching, considering together LO matching condition. The measured results show 6 dB of conversion loss, 23 dB LO/RF isolation and 3 dBm of input 1l dB, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.449-456
• /
• 2012

Herein, we design a wideband $8{\times}8$ waveguide Butler matrix in order to use in a multi-port amplifiers(MPAs) at Ka-band. To achieve the broadband characteristic, we design a binomial 6-slot 3 dB directional coupler which is used to configure the $8{\times}8$ Butler matrix. The measured results of the fabricated $8{\times}8$ Butler matrix have low insertion loss of less than 0.3 dB, good return loss of over 26 dB and high isolation of over 35 dB within the design bandwidth of 3 GHz.

• Journal of information and communication convergence engineering
• /
• v.1 no.3
• /
• pp.139-142
• /
• 2003

In this paper, we consider the factors that affect a conversion loss performance in designing a single balanced diode mixer integrated with IRF(Image Reject Filter), based on the embedded electrical wavelength placed between the IRF and mixer, diode matching and LO drive amplifier. To evaluate the conversion loss performance, we suggest two types of a single balanced mixer using 90 degree branch line coupler, microstrip line and schottky diode. One is only mixer and the other is integrated with IRF and LO drive amplifier. The measured results of a single balance diode mixer integrated IRF show the conversion loss of 8.5 dB and the flatness of 1 dB p-p from 21.2 GHz to 22.6 GHz with 10 dBm LO. The measured input PI dB and IIP3 are 7 dBm and 15 dBm respectively under the nominal LO power level of 10dBm. The LO/RF and LO/IF isolation are 22 dB and 50 dB, respectively.

• Journal of electromagnetic engineering and science
• /
• v.12 no.4
• /
• pp.280-286
• /
• 2012

The conventionally classified waves are reclassified in this paper, including the waves associated with metamaterial (MTM) transmission lines. Various types of guided waves in periodic structures are analyzed for 1D Composite Right/Left Handed (CRLH) transmission lines (TL). In addition, dispersion diagrams for 1D CRLH, RH, and LH TLs are presented in terms of radiation conditions. We have refined the design equations of the conventional 1D CRLH TL and proposed a condition to realize the desired phase shift and its slope per unit cell. This condition has been applied to the conventional Wilkinson power divider and realized into MTM added $90^{\circ}$ hybrid coupler. Based on the 10 dB return loss and the $90{\pm}10^{\circ}$ phase shift, the bandwidths of the MTM added $90^{\circ}$ hybrid coupler are 82.25% and 103.5% against the conventional 23% and 52.5%, respectively.