• 한국화재소방학회논문지
• /
• 제29권6호
• /
• pp.33-39
• /
• 2015

본 논문에서는 동절기 소방용 CPVC 배관의 동파방지를 위하여 최적의 열선위치를 에너지방정식과 비정상 비압축성 Navier-stokes 방정식을 사용하여 수치해석을 수행하였다. CPVC 배관은 탄소강관과 열용량 등 주요 물성에 큰 차이가 있어 배관 내 물의 유동에 큰 차이를 보이는 것을 확인할 수 있었다. 물의 자연대류와 CPVC 배관의 열전도가 결합된 복합열전달을 해석하였다. 상용코드(Fluent)를 사용하여 혼합 열전달 배관 내 물의 비정상적인 유동과 온도분포를 확인하였다. 소방용 CPVC 배관 단면의 하부에 열선을 설치하는 것이 다른 위치에 설치하는 것보다 시간에 따른 물의 최저 온도가 가장 높아서 동파방지에 보다 효과적인 것을 확인하였다.

• 한국항공우주학회지
• /
• 제37권10호
• /
• pp.984-991
• /
• 2009

본 연구에서는 충격파 및 유동박리효과를 고려하여 항공기 동체-날개 형상(DLR-F4)에 대한 천음속 공탄성 응답해석을 수행하였다. 시간 영역에서 전산유체역학, 유한요소모델 및 전산구조동역학 기법을 활용한 유체-구조 연계시스템을 적용하여 공탄성 해석을 수행 하였으며, 이를 이용하여 비행체의 설계에 정확하고 유용한 결과를 제시할 수 있다. 천음속 영역에서 항공기 동체-날개 형상에 대해 비선형 비정상 공력해석을 수행하기 위하여 6면체 구조 격자를 생성하였고, Navier-Stokes 방정식을 적용하였다. 항공기 동체-날개 형상의 정적 및 동적 공탄성 응답 특성을 파악하였고, 항공기 설계 및 시험 연구자에게 실제적이고 유용한 결과를 제시할 수 있다.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.21-29
• /
• 2002

본 연구는 다공벽과 공동을 사용한 피동제어법을 천음속 습공기 유동에서 발생하는 충격파와 경계층 간섭에 적응하였다. 지배방정식은 액적성장 방정식과 완전히 결합된 2차원, 비정상, 압축성 Navier-Stokes 방정식이며, 3차 오더 MUSCL 타입의 TVD 기법을 사용하였다. 또 난류모델로는 Baldwin-Lomax 모델을 적용하였다. 본 연구에서 적용한 제어법의 유용성을 조사하기 위해 유동의 전압손실과 충격파 변위의 시간의존성 거동을 해석하였다. 수치계산 결과로부터 본 연구의 피동제어기법을 통해 천음속 습공기 유동에서 발생하는 충격파/경계층 간섭으로 인한 전압손실이 상당히 감소하였고, 익에서 충격파 운동을 억제하는 것으로 나타났다. 또 다공영역의 위치가 본 연구의 제어법의 효과에 상당한 영향을 준다는 것이 발견하였다.

• 한국항공우주학회지
• /
• 제34권1호
• /
• pp.18-23
• /
• 2006

본 연구에서는 Gurney 플랩이 달린 NACA 0012 익형에 대한 플러터 해석을 시간 영역에서 수행하였다. 2차원 비정상 압축성 Navier-Stokes 방정식과 Lagrange 방정식으로 부터 유도한 2계 자유도 plunge & pitch 모델을 지배방정식으로 하여 연성 결합 기법을 통해 플러터 해석을 수행하였다. 계산 결과 Gurney 플랩을 장착할 경우 NACA 0012에 비해 플러터가 발생하는 속도가 낮아졌고, 마하수가 0.85보다 작은 영역에서는 Gurney 플랩의 플러터 경계 곡선은 안전 여유를 상회하는 영역에 위치하였다. 그러나, 마하수가 0.85에서 0.9사이일 경우에는 안전 여유에 근접하게 되므로 이러한 운용 영역에서는 Gurney 플랩의 사용에 주의를 요한다.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.53-59
• /
• 2011

In this study, steady and unsteady aerodynamic analyses of a huge rocket configuration have been conducted in a transonic flow region. The launch vehicle structural response are coupled with the transonic flow state transitions at the nose of the payload fairing. Before performing the coupled fluid-structure transonic aeroealstic simulations transonic aerodynamic characteristics are investigated for the pitching motions of the rocket at finite angle-of-attack. An unsteady CFD analysis method with a moving grid technique based on the Reynolds-averaged Navier-Stokes equations with the k-w SST transition turbulence model is applied to accurately predict the transonic loads of the rocket at pitching motion. It is shown that the fluctuating amplitude of the lateral aerodynamic loads imposed on the rocket due to the pitching motion can be significantly increased in the transonic flow region.

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.647-652
• /
• 2015

A fully coupled finite element analysis (FEA) technique was developed for analyzing the discharge phenomena and dielectric liquid flow while considering surface charge density effects in dielectric flow guidance. In addition, the simulated speed of surface charge propagation was compared and verified with the experimental results shown in the literature. Recently, electrohydrodynamics (EHD) techniques have been widely applied to enhance the cooling performance of electromagnetic systems by utilizing gaseous or liquid media. The main advantage of EHD techniques is the non-contact and low-noise nature of smart control using an electric field. In some cases, flow can be achieved using only a main electric field source. The driving sources in EHD flow are ionization in the breakdown region and ionic dissociation in the sub-breakdown region. Dielectric guidance can be used to enhance the speed of discharge propagation and fluidic flow along the direction of the electric field. To analyze this EHD phenomenon, in this study, the fully coupled FEA was composed of Poisson's equation for an electric field, charge continuity equations in the form of the Nernst-Planck equation for ions, and the Navier-Stokes equation for an incompressible fluidic flow. To develop a generalized numerical technique for various EHD phenomena that considers fluidic flow effects including dielectric flow guidance, we examined the surface charge accumulation on a dielectric surface and ionization, dissociation, and recombination effects.

• Ocean Systems Engineering
• /
• 제7권3호
• /
• pp.299-318
• /
• 2017

The paper aims at illustrating several key issues and ongoing efforts for development of a reliable fully-Lagrangian particle-based solver for simulation of hydroelastic slamming. Fluid model is founded on the solution of Navier-Stokes along with continuity equations via an enhanced version of a projection-based particle method, namely, Moving Particle Semi-implicit (MPS) method. The fluid model is carefully coupled with a structure model on the basis of conservation of linear and angular momenta for an elastic solid. The developed coupled FSI (Fluid-Structure Interaction) solver is applied to simulations of high velocity impact of an elastic aluminum wedge and hydroelastic slammings of marine panels. Validations are made both qualitatively and quantitatively in terms of reproduced pressure as well as structure deformation. Several remaining challenges as well as important key issues are highlighted. At last, a recently developed multi-scale MPS method is incorporated in the developed FSI solver towards enhancement of its adaptivity.

• 대한기계학회논문집B
• /
• 제30권4호
• /
• pp.320-327
• /
• 2006

The computations of chemically reacting laminar and turbulent flows are performed using the preconditioned Navier-Stokes solver coupled with turbulent transport and multi-species equations. A low-Reynolds number $k-\varepsilon$ turbulence model proposed by Chien is used. The presence of the turbulent kinetic energy tenn in the momentum equation can materially affect the overall stability of the fluids-turbulence system. Because of this coupling effect, a fully coupled formulation is desirable and this approach is taken in the present study. Choi and Merkle's preconditioning technique is used to overcome the convergence difficulties occurred at low speed flows. The numerical scheme used for the present study is based on the implicit upwind ADI algorithm and is validated through the comparisons of computational and experimental results for laminar methane-air diffusion flame and $ H_2/O_2$ reacting turbulent shear flow. Preconditioning formulation shows better convergence characteristics than that of non-preconditioned system by approximately five times as much.

• 한국해양공학회지
• /
• 제31권1호
• /
• pp.14-21
• /
• 2017

The erosion of solid particles in a pipe elbow was numerically investigated. A numerical procedure to estimate the sand erosion rate, as well as the particle motion, in the pipe elbow flow was introduced. This procedure was performed based on the combined empirical erosion model and computational fluid dynamics (CFD) analysis to consider the interaction between the particle motion and the eroded surface. The underlying turbulent flow on an Eulerian frame is described by the Reynolds averaged Navier-Stokes (RANS) equations with a $k-{\epsilon}$ turbulent model. The one-way coupled Eulerian-Lagrangian motion of the air flow and sand particles is employed to simulate the particle trajectories and particle-wall interactions on the pipe surfaces. The predicted CFD erosion magnitudes are compared with experimental data from pipe elbows. The erosion rate results do not reveal a good accordance between the simulation and experimental results. It seems that the CFD shows a slightly over-predicted erosion ratio.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.33-38
• /
• 2008

For study on the unsteady blockage effect, flows around a rotationally oscillating circular cylinder with relatively low forcing frequency in closed test-section wind tunnels have been numerically investigated by solving compressible Navier-Stokes equations. The numerical scheme is based on a node-based finite-volume method with the Roe's flux-difference splitting and an implicit time-integration method coupled with dual time-step sub-iteration. The computed results of the oscillating cylinder in the test section showed that the fluctuations of lift and drag are augmented by the blockage effects. The drag further increases because of low base pressure. The pressure on the test section wall shows the harmonics having the oscillating and the shedding frequencies contained in the blockage effect.