• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1577-1578
• /
• 1997

We have studied the effect of the rubbing fabric for liquid crystal alignment and pretilt angle generation in nematic liquid crystals (NLC), 4-cyano-4-n-penthylbiphenyl (5CB), on rubbed polyimide (PI) surfaces. The pretilt angle of 5CB for nylon and rayon fabric is larger than that of cotton fabric in weak rubbing on rubbed PI surfaces. We conclude that the pretilt angle of 5CB is strongly related to the rubbing fabrics on rubbed PI surfaces.

• Journal of the Korean Home Economics Association
• /
• v.37 no.11
• /
• pp.157-165
• /
• 1999

This study was carried out to examine the effect of clothing materials and multi-layered textiles on thermal resistance value. Cotton, polyester, wool, silk, rayon and acetate were selected for the specimens. Thermal resistance value was tested with 2 kinds of methods(thermo labo II and BK type tester). The results were as follows; 1. The effects of clothing materials for thermal resistance value were decreased by adding layers. 2. When the fabrics are measured with multiple layers, the fabric of the lowest thermal resistance value at single layer was showed the highest increasing tendency for all test methods.

• Textile Coloration and Finishing
• /
• v.8 no.5
• /
• pp.76-83
• /
• 1996

Fragrant microcapsules were prepared by in situ polymerization using urea-formaldehyde prepolymer. Lemon oil and migrin oil as susceptible materials were used. The diameter and distribution of the microcapsule were controlled by several factors, such as wall material, core material content, emulsion agent and stirring speed, respectively. Susceptible cotton fabrics with fragrant release functionality were successfully produced by using microcapsule containing fragrant materials.

• Journal of the Korean Society of Costume
• /
• v.59 no.8
• /
• pp.132-151
• /
• 2009

All of 132 kinds of fabrics are used in excavated costume from the Dongrae Jung's Tomb. Classified by its materials, it is divided into small groups as follows: 58 pieces of silk tabby 43.9%, 2 of filament silk tabby 1.5%, 14 of thin filament silk tabby 10.6%, 19 of spun yarn silk 14.4%, 4 of twill without a pattern 3.0%, 8 of patterned silk tabby 6.1%, 23 of satin damask 17.4%, 1 of damask with supplementary gold thread 0.8%, 2 of mixture fabric with silk and cotton 1.5%, and 1 of ramie fabric 0.8%. Classified by ways of weaving: 96 pieces of plain weave 73%, 23 of satin weave 17%, 8 of patterned silk tabby consisting of plain weave material and twill weave pattern-6%, 4 of twill weave 3%, and 1 of compound weave 1 %. In point of patterns, the most often used ones are plant patterns such as lotus patterns, peony patterns, plum blossom patterns, flowers representing seasons patterns, and small flower patterns. For animal patterns, it has phoenix patterns designed together with flowers representing seasons patterns. And for natural scenery patterns, it shows cloud patterns with treasures patterns together. For object patterns, it also shows treasures patterns mixed with cloud or lotus together. For geometrical patterns, it has rhomboid patterns and 卍 character patterns; some show only rhomboid patterns and others show material patterns of 卍 character patterns blended together with fruit, lotus, etc.

• Fashion & Textile Research Journal
• /
• v.2 no.3
• /
• pp.220-226
• /
• 2000

This study was to determine the characteristics of vapor-permeable waterproof finished fabric by the coating method. 4 different kinds of coating fabrics (A : wet, porous, polyurethane, B : dry, no porous, polyurethane, C : shape memory polyurethane and D : dry, porous polyurethane) were used, which were developed recently With this sample, moisture transport rate ($40^{\circ}C$, 45%RH & $40^{\circ}C$, 95%RH), changes of coating side's shape by washing times, water repellency rate, contracted length, qmax, heat conductivity, heat keeping rate, heat keeping rate with cotton, heat keeping rate on humidity temperature and humidity within clothing etc. were checked. And it was done in a climate chamber under $20{\pm}2^{\circ}C$, $65{\pm}5%RH$. The results of this study were as follow; In the moisture vapor transmission of sample B and C increased on high temperature and high humidity while sample A and D decreased, on this condition. Qmax rate had high relation with ground fabric's surface properties and the order was A>C>D>B. Heat conductivity had high relation with thickness and surface properties. Heat keeping rates on sweat condition showed around half percents of heat keeping rates on normal condition, but had no relation with moisture vapor transport rate. Changes of the fabric's properties by washing times were different in accordance with the construction of fabrics and the coating resin. Sample C had tow heat keeping rate on the high temperature and humidity and high heat keeping rate on the low temperature and humidity Moisture transport rate of vapor-permeable waterproof finished fabrics had high relation with the properties of ground fabrics on low humidity condition, but on the high humidity condition, it was highly related with the properties of coating resin.

• Journal of the Korean Home Economics Association
• /
• v.20 no.1
• /
• pp.65-77
• /
• 1982

The intent of this study was to focus attention on the relationship between curtain fabrics and consumer perceptions towards curtains and draperies. This study consisted of the laboratory test for thermal transmittance of selected fabrics and the exploratory survey for consumer perceptions towards curtains and draperies. The objectives of the laboratory test were to measure fabric's thermal transmittance, thickness, and count which affect to the effect in heat controlling. Selected 23 fabrics were tested at Korean Yarn and Fabrics Testing Inspection Institute. The objectives of the exploratory survey were to determine sociodemographic factors; the stage of family life cycle, the economics status, and homemaker's level of education, and physical factors; the type of houses, the direction of windows, and the type of windows, affect consumer perceptions toward curtains and draperies. Questionaires were administered to 489 homemakers selected by a stratified propotional sampling plan, in Seoul in October, 1981. Data from responses were analyzed by T-test(Analysis of Varience) and Partial Correlation. The major findings are as follows; 1. The results of the laboratory test 1) The fabrics used for draperies had higher effect in heat controlling than the fabrics used for glass curtains. 2) It did not show much differences among the fibers in heat controlling. The thicker fibers, however, had the higher effect in heat controlling among same fibers. 3) The fabrics which had high level of effect I heat controlling were corduroy, flax, rayon, nylon, acetate, thick polyester, and thick polyacrylic. The fabrics which had midium level of affect in heat controlling were velveteen, velvet, and thin polyester. The fabrics which had low level of effect in heat controlling were cotton, silk, and thin polyarcylic. 4) The draperies with lining showed 2∼5 times more effective in heat controlling than the draperies without lining. 2. The results of the exploratory survey Consumer perceptions towards curtains and draperies consisted of functional, financial, and aesthetic perception. 1) Factor affecting functional perception towards curtains and draperies was the stage of family life cycle. Families in the contracting stage considered function of curtains and draperies significantly better than those in others stages. 2) Factors affecting financial perception towards curtains and draperies were the economic status, homemaker's level of education, the direction of windows, and the type of windows. However the correlation between the factors and financial perception was too low to explain the significance of tendency. 3) There was not any factors affecting aesthetic perception towards curtains and draperies.

• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.93-101
• /
• 2022

In this study, the dyeing properties of supercritical fluid dyed cotton fabrics were investigated which use two types of dyes, such as C.I. Disperse orange and C.I. Disperse red 167. Dyeing temperature, pressure and leveling time were equally applied at 130 ℃, 250 bar, and 60 minutes with reference to the related literature, and experiments were performed at concentrations of 0.04, 0.1, 0.4 and 0.8 % o.w.f with different concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, as the concentration increased, the L^* value decreased and the K/S value increased. However, as the concentration increased, the increase in K/S value decreased compared to the input amount, and this tendency was more obvious in C.I. Disperse red 167 than in C.I. Disperse orange 155. The dye exhaustion rate which was calculated by using the amount of residual dye in the pot was also C.I. Disperse orange 155 was 96.16 % and C.I. Disperse red 167 was 94.57 %. However, as the dyeing concentration increased, the dye exhaustion rate decreased, that C.I. Disperse orange was 95.33 % and C.I. Disperse red 167 was 90.63 %. As a result of the washing fastness test for both dyes, dyed samples of which concentrations were 0.4 and 0.8 % o.w.f decreased by 0.5 ~ 1.0 grade. This is predicted because the dye did not completely adhere to the amorphous region of the cotton fiber and the dye simply adsorbed. The fastness to rubbing also maintained at least grade 3-4 up to the 0.1 % o.w.f concentration, but at the concentration of 0.4 % o.w.f or higher, it fell to grade 1 or lower, showing a very poor friction fastness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.7 no.2
• /
• pp.19-25
• /
• 1983

The purpose of this study was to investigate the effects of laundry variables and additives on the removal of deposited calcium on the cotton fabric. Samples of calcium deposited fabric was made by treating fabric with $CaC1_2$ and $Na_2CO_3$ solution subsequently. The experimental variables were: 1) NaOH concentration ($0.0001\%$, $0.0005\%$, $0.001\%$, $0.005\%$, $0.01\%$) 2) Alkaline builders(sodium carbonate, sodium meta silicate) 3) Sequestering agents(STPP and EDTA concentration: $0.02\%$, $0.04\%$, $0.06\%$, $0.08\%$, $0.1\%$, $0.15\%$, $0.2\%$) 4) Temperatures($25\pm1^{\circ}C$, $40\pm1^{\circ}C$, $60\pm1^{\circ}C$) 5) Edge-abrasion to the removal of deposited calcium on the cotton fabric. The fabric was washed for 15 minutes in a washing machine(Model: Gold Star WP-3007) or Launder-0-meter(40$\~$45 r.p.m., Toyo Rika Instrument Inc.) and rinsed 3 times per every rinsing time. The amount of calcium deposits on the fabrics was determined by EDTA-back titration methods and edge-abrasion was evaluated by ASTM D 3886 method. The results of this study were as follows: 1) pH of surfactant solution(NaOH concentration) did not influence on the removal of deposited calcium on the cotton fabric. 2) Added alkaline builders did not influence on the removal of deposited calcium on the cotton fabric. 3) It was shown that STPP and EDTA were effective to remove deposited calcium. The removal of deposited calcium on the cotton fabric was proportionally increased with increasing concentration of STPP and EDTA. At high concentration, however, the rate was rather decreased with increasing concentration. 4) The temperature of washing solution did not influence on the removal of dedosited calcium on the cotton fabric. 5) As the removal of deposited calcium on the cotton fabric was increased, the rate of edge-abrasion of the fabric was gradually increased.

• Science of Emotion and Sensibility
• /
• v.20 no.2
• /
• pp.117-126
• /
• 2017

In this study, moisture transport characteristics for the woven and knitted fabrics made of 8 kinds of fiber materials using MMT (moisture management tester) were measured and discussed with the Bireck bt MMT and water evaporating rate (WER) measuring methods, which are vertical moisture transport methods. In addition, the drying property by MMT of the eight kinds of specimens was compared and discussed with the results measured by the vertical drying measurement. MMT experimental result which is horizental moisture transport appeared to be similar to the result of the Bireck method, which is the vertical moisture transport experiment. Absortion time measured from drip method of the fabrics made of the bamboo, linen, and cotton/nylon composite fabrics was short and thus they showed best wicking property, which was attributed to the low contact angle on the fabric surface and high porosity of the fabrics due to the staple yarn structure composed of the hydrophilic staple fibers. In drying property of the fabric specimens by MMT, maximum absorption radius of the dry-zone knit and bamboo woven fabrics were the highest and they showed the best drying property, which was a little different result compared with vertical drying measurement method. Half time of the drying rate in the MMT method was highly correlated with the fabric thickness and saturated moisture absortion rate and their regression coefficients were 0.9 and 0.88, respectively. This means that the knitted and woven fabric design technology for retaining good wicking and drying properties of the fabrics with thin fabric thickness is very important for obtaining high functional wear comfort fabrics. In addition, wicking and drying properties of the fabrics made of different fiber materials and with different yarns and fabric structures showed different results according to the measuring methods.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.1 s.26
• /
• pp.81-91
• /
• 1988

The purpose of this study is to investigate the physiolosical responses and subjective wear sensation to the clothes with different cellulose composition. The experimental garments were four types of cellulosic fabrics, respectively composed of $100\%$-cotton, $100\%$-Rayon, cotton/Flax 85/15, and rayon/Flax 85/15 (weft blended), were sewn in blouses with half-length sleeves. Four healthy women were chosen for this experiment. The condition of the experimental room were in two environments: Temp., $25{\pm}1^{\circ}C$, R.H. $60{\pm}3\%$ and Temp., $30{\pm}1^{\circ}C$, R.H. $70{\pm}3\%$, and air velocity was maintained at 0.25 m/sec. The results are as follows. 1) At $25^{\circ}C$, rayon blouse showed the pleasantest feeling because of its excellent humidity sensation and tactile sensation. At $30^{\circ}C$, rayon and flax blended blouse showed most comportable sensation. In both environments, blouse of $100\%$ cotton showed the least pleasant because of high vapor pressure inside the blouse and bad tactile sensation. 2) Vapor pressure inside the blouse and tactile sensation play the most impotant role in comfort. Consequantly the blouse made of $100\%$-cotton which bring low air permeability, moisture regain and water vapor permearbility showed more unpleastness than rayon blouse because it raises temperature, relative humidity and vapor pressure inside the blouse under the hot circumstances In the conditions with much sweat, rayon and flax blended blouse with high stiffness increases comfort better than $100\%$ rayon because the former prevents sticking to the skin.