• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.19-27
• /
• 2004

The dyeing on cellulose fibers such as cotton and viscose viscose rayon was carried out by the use of solution extracted from natural fresh leaves of indigo plant under several dyeing conditions. The dyeing affinity of viscose rayon was higher than that of cotton. The total K/S value of dyed fabrics was considerably increased with repeated dyeings, while a dyeing time has a little influence on it. Both fibers were hardly dyed by indigo at $60^{\circ)$ and cotton was dyed better at $40^{\circ)$ than at $20^{\circ)$, but in viscose rayon, a little difference of total K/S was shown between $20^{\circ)$ and $40^{\circ)$. The color change of dyed fabric according to dyeing conditions was evaluated by the CIELAB color system. viscose rayon had a lower $b^*$ so that it looked bluer than cotton and when the celluose fibers were dyed by indigo plant at the lower temperature, the bluer it looked. By repeated dyeings the $b^*$value of dyed fabrics was much increased but the $a^*$ value was little influenced and in case of viscose rayon the change was considerable.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.1027-1036
• /
• 2005

Based on the correlation analysis result of preceding research, the biodegradabilities of cellulose fibers were closely related to the moisture regain of the samples, which reflects the hydrophilicity and internal structure of the fibers. In addition to this factor, it was expected that the biodegradation conditions influence the biodegradability of fibers. In this study, widely used cellulose fibers including cotton, rayon, and acetate were used. The biodegradabilities of cellulose fibers were measured by soilburial test, and then the degradation behaviors based on each condition were compared. Moreover, the effects of degradation conditions such as humidity of the soil were investigated. Changes in the internal structure of samples were also observed by X-ray analysis according to the soil burial time. It was shown that humidity of soil facilitated the degradation of cotton, rayon, and acetate fibers, showing higher degradation rate with higher humidity in soil. This effect was shown to be much greater in the fibers of high moisture regain such as cotton and rayon. In respect of microstructure change, crystallinities and their crystal size of fibers decreased remarkably in the soil of higher humidity. It was revealed that degradation of crystalline area was more dependent on the soil humidity than that of amorphous area.

• The Research Journal of the Costume Culture
• /
• v.24 no.6
• /
• pp.777-787
• /
• 2016

This study was carried out in order to provide useful data for planning fabrics of summer eco-friendly fashion products. The fabrics used in this study were four cellulose fibers: cotton, cotton/mulberry blended, flax, and flax/lyocell blended. Dyeing with natural indigo was carried out under three different reducing conditions (i.e., general, eclectic, and eco-friendly) that have different reducing agent and pH levels, and hydrosulfite and glucose were used as a reducing agent. The dye uptake (K/S value) of fabrics dyed with natural indigo by a reducing condition was the highest at 660nm. Regardless of the fabrics, dye uptake was the highest under the general reducing condition and the lowest under the eco-friendly reducing condition. Under different reducing conditions, the dye uptake of natural indigo fabrics with the maximum absorption wavelength indicated a difference. The colorfastness of cellulose fabrics that were dyed with natural indigo had a rate of 4 to 5 except for rubbing fastness, which indicated good colorfastness. Additionally, natural indigo-dyed cotton and flax fabrics had good antibiosis. When the color characteristics of fabrics dyed with natural indigo were measured, all of the three reducing conditions created purple blue (PB) colors, and the color characteristics of dyed fabrics by reducing condition and fabric showed significant differences.

• Textile Coloration and Finishing
• /
• v.2 no.3
• /
• pp.51-58
• /
• 1990

Cotton fabrics were mercerized in ammonia water, sodium hydroxide and mixture of ammonia/sodium hydroxide, slack and under tension. X-ray and infrared spectra analyses were used to measure crystallinity of treated cottons. Changes due to swelling, which took place in the accessible regions were determined by moisture regain and dye adsorption. In addition to that crease recovery was compared mutually, and breaking strength-elongation compared, too. Both ammonia water and caustic treatments produced changes in morphology (swollen fibers, decrease in convolutions) and in fine structure of the cellulose (increase accessibility as measured by increased moisture regain, dye adsorption). X-ray diffraction showed partial recrystallization into cellulose III lattic after tension treatment with ammonia water. Both reagents produced increased cotton elongation-at-break with slack mercerization, increased cotton breaking strength with tension mercerization, and increased moisture regain or dye adsorption with slack mercerization.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.428-433
• /
• 2009

Cellulose triacetate (CTA) was prepared from cotton linter and pulps which contain various contents of $\alpha$-cellulose. CTA which contains 2.8 of degree of substitution (DS) and 222 of degree of polymerization (DP) was obtained from V-81 pulp under the heterogeneous system. The DS was measured by the titration method, and the DP was obtained by measurement of viscosity. FT-IR spectometer (FT-IR 6300, JASCO) was used to analyze the chemical structure of raw materials and cellulose triacetate, and X-ray diffractometer (X-pert MPD PW3040, Philips) was used to confirm the crystal structure and to calculate the relative crystallinity index (RCI). As $\alpha$-cellulose content in pulp increased, the acetylation yield increased. Besides with a kind of pulp, it contains insoluble residue which was mainly formed due to the formation of glucomannan triacetate and xylan diacetate during the esterification.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.68-74
• /
• 2016

Nanofibrillated cellulose (NFC) was prepared from cotton linter after electron beam irradiation to investigate its effects on the manufacturing efficiency of the NFC preparation and the property changes by the treatment. Mechanical device (Super Masscolloider) was used to prepare the NFC and its passing frequency for each NFC preparation was recorded. More electron beam irradiation resulted in less passing frequency. Alpha cellulose content, molecular weight, crystallinity index, and thermal decomposition behavior of each treatment were lowered by electron beam treatment (10 and 100 kGy) and grinding process. NFC films were prepared to investigate their mechanical properties. There were little changes in tensile properties of the NFC films.

• Textile Coloration and Finishing
• /
• v.21 no.2
• /
• pp.29-39
• /
• 2009

The color mixture, obtained from Indigo and Japanese pagoda tree, was applied to cellulose fibers such as cotton, linen and rayon to diversify color gamut of natural dyes. The color mixture was tried with two different methods. The first process was that cellulose fibers were dyed with $5{\sim}25%$ owf Japanese pagoda tree solution, and then dyed 1 to 4 times with Indigo. The second process was dyeing 1 to 7 times with Indigo, followed by dyeing with $5{\sim}25%$ owf Japanese pagoda tree solution. K/S value of the dyed fibers with one colorant and color mixture increased in the order of linen, cotton, rayon. It was also found that the first process could give higher K/S values than the second process.

• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.15-26
• /
• 1994

Cotton fabrics were treated with the cellulase which is an enzyme to decompose cellulose and its actional mechanism is known. The optimum condition of the cellulase to the cotton fabrics and the weight losses, tensile strengths of the treated cotton fabrics were also obtained. The cellulase performs a specific catalytic action on the ${\beta}-1$, 4-glucosidic bonds of the cellulose molecules and hydrolyzes them. For that reason, the negative surface charges of the cotton fabrics were increased by additional generation. of hyrdoxyl groups. The increased surface charges cause the decrease of dye adsorption by inhibiting the approach of the anions of direct dyes. But, it was overcome by the use of enough amount of salt, it means that sodium ions of the salt neutralize the almost all of negative charges of the cotton fabrics. The improvement of the water absorbency is also due to the increased hydroxyl groups In addition, their handles including the mechanical properties were measured and caculated by KES system which is a measuring apparatus that numerizes and objectificates human's feeling, especially touch. As the results, we knew that KOSH(stiffness) and FUKURAMI(fulness & softness) were decreased and that NUMERI(smoothness) was increased.

• Journal of Life Science
• /
• v.22 no.4
• /
• pp.508-515
• /
• 2012

In this study, DEAE-cotton [derivatized by 2-(diethylamino)ethyl chloride hydrochloride (DEAE HCl)] was prepared as a carrier for immobilized $Pichia$ $stipitis$ for ethanol production. When cotton was derivatized with 0.5 M DEAE HCl, the yeast cell suspension was adsorbed at 100% of the initial cell $OD_{600}$. The adsorbed yeast cells were estimated to be 101.8 mg-dry cells/g-DEAE-cotton. In particular, when a flask culture using the immobilized yeast cells was conducted in a glucose and xylose-containing medium, the yeast cells on the DEAE-cotton gradually produced ethanol, according to glucose and xylose consumption; the ethanol yield was approximately 0.33 g-ethanol/g-monosaccharide. Because DEAE-cotton was successfully used as a carrier for ethanol production from a glucose and xylose-containing medium, we expect that this bioethanol production process may be used for the bioethanol production process from the hydrolysate of lignocellulosic biomass. All the results of DEAE-cotton were compared with those of DEAE-cellulose as a carrier for immobilization.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.23-32
• /
• 2015

In this study, chemical and physical changes of dissolving pulps which have similar viscosity by dry milling and fractionation were investigated. We used two types of dissolving pulp made from wood and cotton linter fiber, respectively. Dry milling was executed by knife cutter and pulp powders were fractionated by sieve shaker into 4 grades. We analyzed fiber properties, crystallinity index, viscosity, molecular weight of pulp sheet and powders. It was found that poly-dispersity index of cotton linter pulp was smaller than that of wood pulp, meaning that cotton pulp has more narrow molecular weight distribution. It was assumed that these were related to exposure times to chemical treatment which cut cellulose chains not evenly. At least 4 times of chemical treatments for wood pulp were executed and only two times of chemical treatments for cotton linter pulp were done. After dry milling average molecular weight and crystallinity index of cotton linter pulp powders were reduced and these were related to fines content and shape of pulp powders.