• Journal of Biosystems Engineering
• /
• 제30권2호
• /
• pp.81-88
• /
• 2005

Manual transplanting Chinese cabbage needs 184 hours per ha in Korea. Mechanization of Chinese cabbage transplanting operation has been highly required because it needs highly intensive labor during peak season. This study was conducted to developed walking-type Chinese cabbage transplanter. In order to find out design factor of the transplanter, a kinematic analysis software, RecurDyn, was used. The prototype was tested in the circular soil bin and its operating motion was captured and analyzed using high speed camera system. Prototype was one row type which utilized original parts of engine, transmission and etc. from walking-type rice transplanter in order to save the manufacturing cost. Success ratio of pick-up device of hole-pin type and latch type were $96.0\%$ and $99.2\%$, respectively. which was highly affected by feeding accuracy of feeding device of seedling. Transplanting device of the prototype produced a elliptic loci which were coincident with those produced by the computer simulation. Prototype proved good performance in transplanting with mulching and without mulching operation, either. Working performance of prototype was 22 hours per ha and operation cost of the prototype was 961,757 won per ha. So, it would reduce $88\%$ of the labor and $29\%$ of operation cost.

• Journal of Nutrition and Health
• /
• 제36권5호
• /
• pp.528-535
• /
• 2003

The purposes of this study were: 1) to investigate the operational and financial characteristics of contract-managed high school food services in Seoul, 2) to analyze the financial performance of high school food services 3) to develop guidelines for meal pricing and facilities investment costs. From Oct to Nov 2001, questionnaires were mailed to 249 high schools that were managed by contract food service companies. A 40.2％ response rate was recorded. The results of this study were as follows: 1. Student enrollment in high schools run by contract-managed food services was 1,518, with a 68.5％ participation rate in the school lunch program. The average meal price was 2,141 won. 2. Based on the income statement analysis, average total sales were 410,440,504 won and average net profit was 16,098,558 won. 3. The optimum food cost per meal was 1,200-1,300 won per meal, calculating using the methods of conversion factor, RDA (Recommended Daily Allowance), and nutrient exchange unit. 4. Guidelines for meal pricing were developed using the modified actual pricing method based on facilities investment cost, number of meals and food cost. The ratio of labor cost, general management expenses and ordinary profit were adopted from the schools with liability. The food cost, depreciation and interest cost were calculated based on unit meal. 5. The guideline for facilities investment was developed based on the number of meals, meal price and food cost. The guideline included the maximum facilities investment cost paid by the contract food service management company. (Korean J Nutrition 36(5): 528∼535, 2003)

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2000년도 추계학술대회 및 정기총회
• /
• pp.275-278
• /
• 2000

This paper focuses on a performance analysis model for optimizing the freight terminal design and layout using AutoMod simulator and numerical analysis. We developed a model to analyze the freiht terminal performance per unit time and the material handling cost based on both throughput and waiting due to conjestion. We developed computer program for this model and some sample results by both numerical method and AutoMod simulator are compared.

• 한국직업건강간호학회지
• /
• 제4권호
• /
• pp.5-29
• /
• 1995

Occupational health services in Korea have been operated as dual types : one is operated by occupational health care manager and the other is health care agency without their own personnel. The performance of occupational health service should be different due to the variety of characteristics of health care manager and workplace, qualification of health care manager. This study is to analyze performance of occupational health care services with a particular consideration of job performance shape and efficiency, based on comparing those two types of health care management to show on the basic data for the settlement of more qualitative health care management system at workplace. For this study, total 391 places in Seoul and Inchon city area ; 154 places (39.4%) managed by designated health care manager and 237 places (60.6%) by the agency with their commission are selected as research samples. Tools for data collection are questionnares that have been investigated during the period of 20 September 1993-20 December 1993. Those data are compared with percentiles, mean, standard deviation and B/C ratio using SPSS PC program. Conclusions observed from the tests and each comparison could be summerized as follows : 1. Occupational health care have been accomplished at workplaces with designated people than with agencies people, and coverage rate of the occupational health care services has differences, due to management types. The reason of these results is due to visit only one or two times monthly by the agencies, while their own health care manager obsess, at the workplaces all the times. 2. Most of the expense for environmental control of all health care services expenditures shows that there is almost no fundamental improvement because more expenses are needed for procuring personal protective equipment and measuring work environment instead of environmental improvement. 3. It is investigated how much the cost of occupational health care services needs per worker, and calculated how much the cost needs per service hour per worker. The results from this show that the cost of occupational health services at workplaces with their own managers used less than the cost of health care agencies, eventually the former gives better services with less cost than the latter. 4. Benefit/Cost ratio is also produced by total benefit/total cost. The result from the above way reads 4.57 as a whole, while their own manager having workplaces reads 4.82 and the agencies do l.56. Even if their own manager performing workplaces spent more cost, this system produces more benefit than the agencies management. 5. The B/C ratio for medical organization such as local clinic, health care center and pharmacy shows more than or equal to at the workplaces controlled by the agencies. It is inferred that benefit would be much less than the cost used, with so being inefficient. 6. It is assumed that the efficiency ratio of health education is equal to reduction rate of workers medical organization visit. Estimated reduction rate 5%, 10%, 15%, show that the efficiency ratio of health education have an effect on producing benefits. It is estimated that more benefit can be produced if more qualitative education will be provided for enhancing health care efficiency. 7. Results of this study cannot be generalized because there are large scale of deviation in case of workplaces with less than 300 full time workers, but B/C ratio reads 2.69 as a whole and 3.25 at workplaces with their own health care manager are higher than 1.63 at the workplaces manged by the agencies. Finally, all the benefit concerning health care services could not be quantified, measured and shown on the value of money. This is a reason that a considerable part of benefits are so underestimated. This is also thought that measurement tools should be developed for measuring benefits of health care services with a comprehensive quantification. in the future. It is also expected that efficiency of occupational health care services should be investigated using cost-effectiveness analysis.

• 한국국방경영분석학회지
• /
• 제17권1호
• /
• pp.43-60
• /
• 1991

Consider N queues without arrivals and with m identical servers. All jobs are independent and service requirements of jobs in a queue are i.i.d. random variables. At any time only one server may be assigned to a queue and switching between queues are allowed. A unit cost is imposed per job per unit time. The objective is to minimized the expected total cost. An flow approximation model is considered and an upperbound for the percentage error of best nonswitching policies to an optimal policy is found. It is shown that the best nonswitching policy is not worse than $11\%$ of an optimal policy For the stochastic model, we consider the case in which the service requirements of all jobs are i.i.d. with an exponential distribution. A longest first policy is shown to be optimal and a worst case analysis shows that the nonswitching policy which starts with the longest queues is not worse than $11\%$ of the optimal policy.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1994년도 춘계연구발표회 논문개요집
• /
• pp.12-13
• /
• 1994

Magnetic recording is still considered to be a.leader in storage industries in general. The rigid disk drive, in particular, has an advantage over tape, optical, magneto-optical, or flash memories, because of high areal density and fast access time with reasonably low cost per Mbyte. However, to be competitive in the market and to keep an edge over other storage devices, head and media in rigid disk drives require better performance per cost and more aggressive improvement in areal density, as shown in Fig. 1, than before. In this review paper, the future trend in head/media technologies of the rigid disk drive has been reviewed. Thin film media and thin film inductive/MR heads will be mainly discussed, since they are expected to be dominant in the future high-end drives over other technologies, such as particulate media or MIG heads.(omitted)mitted)

• 한방재활의학과학회지
• /
• 제23권3호
• /
• pp.159-175
• /
• 2013

Objectives Herniated Intervertebral Disc of C-spine is one of the most common diseases that causes posterior neck pain. This study was designed to analyze the general distribution and hospital cost by day and case of Korean medical treatment for Cervical Herniated Intervertebral Disc (HIVD). Methods The 132 impatients for treatment of HIVD were analyzed according to the distribution of sex, age, the duration of HIVD, the contributory factors, the Clinical grade at admission, the clinical findings at admission, the duration of hospitalization, the clinical grade at admission and the hospital cost per day and case. Results 1) The total hospital cost per case averaged 1,985,600 Won, which was consisted of room charge 584,044 Won (29.41%), performance fee 511,463 Won (25.76%), herbal medication 381,517 Won (19.21%), Korean medical physiotherapy 296,310 Won (14.92%), food expenses 199,997 Won (10.07%) in order. 2) The total hospital cost per day averaged 137,285 Won, which was consisted of room charge 39,036 Won (28.43%), performance fee 33,594 Won (24.47%), herbal medication 30,642 Won (22.32%), food expenses 12,870 Won (9.37%), and the average duration of hospitalization was 15.1 days. 3) There was statistically significant difference in the consultation fee, room charge, and herbal medication on the part of sex. 4) There was statistically significant difference not only in the performance and consultation on the part of duration of hospitalization but also the in the duration of average duration of hospitalization. 5) There was statistically significant difference in the Korean medical physiotherapy and herbal medication on the part of clinical findings. 6) There was statistically significant difference in the Korean medical physiotherapy and herbal medication on the part of duration of HIVD. 7) There was statistically significant difference in the Korean medical physiotherapy and herbal medication on the part of clinical outcome. 8) There was not only statistically significant difference in the performance, but also in the herbal medication on the part of clinical grade at admission. Conclusions This study provides plenty of information to design out the specific terms of Korean medical expenses of Cervical HIVD inpatients hospitalized at Korean medicine hospital.

• 산업공학
• /
• 제14권1호
• /
• pp.20-29
• /
• 2001

This paper presents a concurrent design approach that deals with manufacturing cell formation and cellular layout in Cellular Manufacturing System. Manufacturing cell formation is to group machines into machine cells dedicated to manufacture of part families, and cellular layout problem determines layout of the manufacturing cells within shop and layout of the machines within a cell. In this paper, a concurrent approach for design of machine cell and cellular layout is developed considering manufacturing parameters such as alternative process plans, alternative machines, production volume and processing time of part, and cost per unit time of operation. A mathematical model which minimizes total cost consisting of machine installation cost, machine operating cost, and intercell and intracell movements cost of part is proposed. A hybrid method based on genetic algorithm is proposed to solve the manufacturing cell formation and cellular layout design problem concurrently. The performance of the hybrid method is examined on several problems.

• Asian-Australasian Journal of Animal Sciences
• /
• 제6권1호
• /
• pp.91-97
• /
• 1993

This experiment was carried out to examine the effects of urea-treated rice straw feeding on the growth performance of crossbred Holstein heifers under different feeding conditions. In the first experiment, the animals were given diets having 2 levels of TDN and CP and 3 levels of crude fiber (22, 30 and 36%) which were formulated with urea-treated rice straw and concentrates. Daily weight gain of heifers was not different between 22% and 30% CF diets, but the reduction of TDN or CP level to 90% of the requirements decreased the weight gain. Fiber content of 36% also reduced the body weight gain. The reduction of TDN significantly reduced DM intake and increased feed conversion ratio. Feed cost per kg weight gain was significantly increased by an increase in CF to 36%. In the second experiment, separate feeding and total mixing feeding were compared. There were no significant differences between the two feeding systems in body weight gain although the possibility of superiority in SF to TMF remained. DM intake was not affected by the feeding system, but 30% CF diet gave higher DM intake. Feed cost per kg weight gain was lower in the 30% CF diet.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권8호
• /
• pp.1078-1084
• /
• 2001

Twelve growing male lambs ($10.05{\pm}0.41kg$, 5 months age) were assigned to three equal groups in a completely randomized design and fed respectively wheat straw (WS), ammoniated wheat straw (AWS) or urea supplemented wheat straw (USWS) along with concentrate mixtures of varying protein and energy contents to meet their requirements as per NRC (1985). Despite comparable nutrient intake and digestibility, the lambs fed A WS based diet digested lower (p<0.05) crude protein. The digestibility of NDF and hemicellulose were lower while the digestibility of cellulose was higher in lambs on AWS as compared to lambs on USWS based diet. The lambs of all the three groups were in positive and comparable N, Ca and P balance except higher Ca balance in lambs fed WS based diet. The body weight change, average daily gain and feed conversion efficiency were similar among the dietary groups. All the parameters of rumen fermentation pattern were comparable between lambs of AWS and USWS based diets except ammonia-N concentration that was higher in the latter however it was lower in WS fed group. Though, the feeding cost per unit gain was comparable in lambs fed all the three diets, the cost incurred towards roughage during 120 days of experimental feeding was significantly less in lambs fed AWS than UTWS. Thus, feeding of USWS can be practiced to minimize labour cost and environmental pollution involved in the process of urea treatment without affecting the performance of growing lambs.