• Current Photovoltaic Research
• /
• v.10 no.2
• /
• pp.62-71
• /
• 2022

The Global RE100 campaign is a one of the voluntary campaign, but it has a lot of influence on domestic companies that have not yet joined the Global RE100. Accordingly, the Korean government introduced the Korean RE100 (K-RE100) system to prepare an institutional mechanism for domestic companies to respond to RE100. However, in Korea, due to the high LCOE of renewable energy and institutional limitations of the power transaction system, there is a limit for companies to implement RE100 in various ways. Therefore, in this study, the implementation cost of RE100 for green tariff, REC purchase, third-party PPA, direct(or corporate) PPA, and self-generation was compared and analyzed to derive the order of implementation with the net present value (NPV) of costs incurred over 20 years. As a result, self-construction was analyzed as the most economical method, but the implementation through the green tariff seemed to be the most realistic implementation method so far. However, considering the gradually falling LCOE, third-party PPA and direct PPA could be secured competitiveness against green tariff in 2025 and 2026. Then it could allow the companies to have various portfolios for implementation of RE100.

• International Journal of Computer Science & Network Security
• /
• v.23 no.2
• /
• pp.55-64
• /
• 2023

The travelling salesman problem (TSP) is an important combinatorial optimization problem that is used in several engineering science branches and has drawn interest to several researchers and scientists. In this problem, a salesman from an arbitrary node, called the warehouse, starts moving and returns to the warehouse after visiting n clients, given that each client is visited only once. The objective in this problem is to find the route with the least cost to the salesman. In this study, a meta-based ant colony system algorithm (ACSA) is suggested to find solution to the TSP that does not use local pheromone update. This algorithm uses the global pheromone update and new heuristic information. Further, pheromone evaporation coefficients are used in search space of the problem as diversification. This modification allows the algorithm to escape local optimization points as much as possible. In addition, 3-opt local search is used as an intensification mechanism for more quality. The effectiveness of the suggested algorithm is assessed on a several standard problem instances. The results show the power of the suggested algorithm which could find quality solutions with a small gap, between obtained solution and optimal solution, of 1%. Additionally, the results in contrast with other algorithms show the appropriate quality of competitiveness of our proposed ACSA.

• Korea Trade Review
• /
• v.47 no.4
• /
• pp.255-270
• /
• 2022

If import/export shippers entrust their international logistics activities to forwarders, they can receive good logistics services at a lower cost. Therefore, it is important to form a trading relationship between the export shipper company and the forwarder, and it helps to improve the competitiveness of the company. This study derives factors that an export shipper company forms a transaction relationship with a forwarder, and analyzes the effect of transaction formation factors on transaction continuity. Next, the relationship between export consignment characteristics of export shippers and their influence on transaction formation factors and transaction continuity is identified. As a result of the study, transaction formation factors consisted of price, quality, and companionship, and all factors were found to affect transaction continuity. The characteristics of consignment logistics for shippers are the proportion of consignment, the number of business partners, and the transaction period. The proportion of consignment and the number of business partners affected the price factor, and the number of business partners affected the quality factor. There was no mutual influence between the transaction continuity and the characteristics of the shipper's logistics consignment. Therefore, there is a need for recognition of a relationship that can grow between shippers and logistics companies through consignment transactions rather than subordinate recognition based on fair transactions.

• Korea Trade Review
• /
• v.47 no.1
• /
• pp.115-130
• /
• 2022

In this study, I focus on analyzing how the effects of implementing ETS are different depending on whether Korean ETS linking with carbon markets in other countries. The global computable general equilibrium (CGE) model built in this study analyzes the chages in the production and trade of industrial sectors according to the international linkage of ETS compared to the reference scenario of emissions reduction targets and implementation of ETS. From the analysis of internatioanl linkage of carbon markets scenarios, Annex B countries-South Korea carbon market linkage with individual ETS in China worse the economic outcomes in South Korea the most. This means South Korea lose the international competitiveness compared to China in this scenario. On the other hand, Annex B-China carbon market linkage with Korean individual ETS implementation reduce the decreases in production and trading. The most effective way is to join a global emissions trading market with China. The results are consistent in most industries of South Korea. These results are caused by that the supply of emission allowance is increased and the price of emissions allowances is dropped by China's participation to the carbon market, which can be understood to reduce the carbon reduction cost for industrial sectors. In addition, it can be also concluded that the determinant of the negative impact of ETS on changes in production and trade is more sensitive to the price of emissions allowances than to the characteristics of production and trade structure.

• Information Systems Review
• /
• v.21 no.4
• /
• pp.99-123
• /
• 2019

The software industry is a high value-added industry in the knowledge information age, and its importance is growing as it not only plays a key role in knowledge creation and utilization, but also secures global competitiveness. Among various SW available in today's business environment, Open Source Software(OSS) is rapidly expanding its activity area by not only leading software development, but also integrating with new information technology. Therefore, the purpose of this research is to empirically examine and analyze the effect of factors on the switching behavior to OSS. To accomplish the study's purpose, we suggest the research model based on "Push-Pull-Mooring" framework. This study empirically examines the two categories of antecedents for switching behavior toward OSS. The survey was conducted to employees at various firms that already switched OSS. A total of 268 responses were collected and analyzed by using the structural equational modeling. The results of this study are as follows; first, continuous maintenance cost, vender dependency, functional indifference, and SW resource inefficiency are significantly related to switch to OSS. Second, network-oriented support, testability and strategic flexibility are significantly related to switch to OSS. Finally, the results show that willingness to secures SW competitiveness has a moderating effect on the relationships between push factors and pull factor with exception of improved knowledge, and switch to OSS. The results of this study will contribute to fields related to OSS both theoretically and practically.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.291-314
• /
• 2018

In recent 3 years, Korea's low-cost airlines have expanded their areas of passenger transportation not only to domestic market but also to Japan, China, Southeast Asia and US territory as a total of 6 companies (8 airlines including small air operation business carriers). Currently, three more airlines have filed for air transportation business certification as future low-cost carriers, and this expansion is expected to continue. To cope with the aggressive airline operations of domestic and foreign low-cost carriers and to enhance their competitiveness, each low-cost airline is taking a number of strategies for promoting cabin service. Therefore, the workload of the cabin crew is increased in proportion to the expansion, and the fatigue directly connected with the safety task performance is increased. It is stipulated in the Enforcement Regulations of the Korea Aviation Safety Act that at minimum, one cabin crew is required per 50 passenger seating capacity, and all low cost carriers are boarding only the minimum cabin crew. Sometimes it is impossible for them to sit in a floor level emergency exit for evacuation, which is the main task of the cabin crew, and this can cause confusion among evacuating passengers in the event of an emergency. In addition, if one of the minimum cabin crew becomes incapacitated due to an injury or the like, it will become a serious impediment in performing emergency evacuation duties. Even in the normal situation, since it will be violating the Act prescription on the minimum cabin crew complement, passengers will have to move to another available airline flights, encountering extreme inconvenience. Annex 6 to the Convention on International Civil Aviation specifies international standards for the determination of the minimum number of cabin crew shall be based only on the number of passenger seats or passengers on board for safe and expeditious emergency evacuation. Thereby in order to enhance the safety of the passengers and the crew on board, it is necessary to consider the cabin crew's fatigue that may occur in the various job characteristics (service, safety, security, first aid)and floor level emergency exit seating in calculating the minimum number of cabin crew. And it is also deemed necessary for the government's regulatory body to enhance the cabin safety for passengers and crew when determining the number of minimum cabin crew by reflecting the cabin crew's workload leading to their fatigue and unavailability to be seated in a floor level emergency exit on low cost carriers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.106-116
• /
• 2016

MTO (Make to Order) is a manufacturing process in which manufacturing starts only after a customer's order is received. Manufacturing after receiving customer's orders means to start a pull-type supply chain operation because manufacturing is performed when demand is confirmed, i.e. being pulled by demand (The opposite business model is to manufacture products for stock MTS (Make to Stock), which is push-type production). There are also BTO (Build to Order) and ATO (Assemble To Order) in which assembly starts according to demand. Lean manufacturing by MTO is very efficient system. Nevertheless, the process industry, generally, which has a high fixed cost burden due to large-scale investment is suitable for mass production of small pieces or 'mass customization' defined recently. The process industry produces large quantities at one time because of the lack of manufacturing flexibility due to long time for model change or job change, and high loss during line-down (shutdown). As a result, it has a lot of inventory and costs are increased. In order to reduce the cost due to the characteristics of the process industry, which has a high fixed cost per hour, it operates a stock production system in which it is made and sold regardless of the order of the customer. Therefore, in a business environment where the external environment changes greatly, the inventory is not sold and it becomes obsolete. As a result, the company's costs increase, profits fall, and it make more difficult to survive in the competition. Based on the customer's order, we have built a new method for order system to meet the characteristics of the process industry by producing it as a high-profitable model. The design elements are designed by deriving the functions to satisfy the Y by collecting the internal and external VOC (voice of customer), and the design elements are verified through the conversion function. And the Y is satisfied through the pilot test verified and supplemented. By operating this make to order system, we have reduced bad inventories, lowered costs, and improved lead time in terms of delivery competitiveness. Make to order system in the process industry is effective for the display glass industry, for example, B and C groups which are non-flagship models, have confirmed that the line is down when there is no order, and A group which is flagship model, have confirmed stock production when there is no order.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.49-55
• /
• 2017

Most motor cases adopt deep drawing products, which are excellent in waterproof functions, concentricity, right angle, and quality. In addition, the blower motor and seat motor, which are installed in the car interior and do not require waterproof function, adopts a multi-forming manufacturing method. The deep drawing process requires an expensive transfer press that can digest approximately 12 processes, such as drawing, trimming and piercing. On the other hand, products can be produced with low investment because the multi-forming method is composed of one multi-forming machine or one multi-forming machine and one press. The multi-forming machine is a high-priced facility that is mostly imported and a bending / shearing process multi-foaming machine, which was developed by domestic small and medium-sized enterprises, is not enough to reduce the production cost. An integral multi - forming machine is used as a limited working method for thin material and small products. A large product and thick material has a high shear load. A large product and thick material has a high shear load and uses a single crank press. After blanking, the worker manually feeds the material to a multi-forming machine. When the bending operation is performed in the multi-forming machine, it is transferred to the press again to calibrate the dimensions. This variance in work processes has resulted in lower cost competitiveness due to the lower productivity, quality issues, and excessive operator input. The aim of this study was to establish a stable and cost - effective production system through bending / shearing process separation and facility automation.

• Journal of Korean Society of Forest Science
• /
• v.96 no.4
• /
• pp.401-407
• /
• 2007

This study analyzed an economic efficiency of oak mushroom cultivation in order to provide data needed for formulating related policies. 88 farmhouses in major producing areas were interviewed with. The average production cost per 100 bed-logs was 151,699 won. Among production costs, material costs accounted for 56.0% and labor costs 41.8%. Oak mushroom cultivation was labor-intensive and labor input was a significant factor determining the production costs. There was 3 7.2% gap in production costs between Chungbuk, the highest cost area and Gyeonggi, the lowest cost area of oak mushroom due to difference in labor input. Average revenue per 100 bed-logs was 178,627 won. Average income per 100 bed-logs, which is variable production costs of 116,613 won subtracted from the revenue, was 62,014 won and thus income rate was 34.7%. Income rate in Jeonbuk, the highest area, was higher than that in Gyeonggi, the lowest area, by 15.8% points due to difference in quantities produced, grade, and variable production costs, in particular, labor costs. The result of the economic analysis indicates that reduction in establishment and labor costs, accounting for the highest portion in production costs is priority issue for the enhancement of the competitiveness of the oak mushroom industry.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.7-18
• /
• 2021

Recently, various connected industrial parks (CIPs) architectures using new technologies such as cloud computing, CPS, big data, fifth-generation mobile communication 5G, IIoT, VR-AR, and ventilation transportation AI algorithms have been proposed in Korea. Korea's small and medium-sized enterprises do not have the upper hand in technological competitiveness than overseas advanced countries such as the United States, Europe and Japan. For this reason, Korea's small and medium-sized enterprises have to invest a lot of money in technology research and development. As a latecomer, Korean SMEs need to improve their profitability in order to find sustainable growth potential. Financially, it is most efficient for small and medium-sized Korean companies to cut costs to increase their profitability. This paper made profitability improvement by reducing costs for small and medium-sized enterprises located in CIPs in Korea a major task. VJP (Vehicle Action Program) was noted as a way to reduce costs for small and medium-sized enterprises located in CIPs in Korea. The method of achieving minimum logistics costs for small businesses through the Korean CIPs payment system was analyzed. The details of the new Korean CIPs payment system were largely divided into four types: "Business", "Data", "Technique", and "Finance". Cost Benefit Analysis (CBA) was used as a performance analysis method for CIPs payment systems.