• 한국항해항만학회지
• /
• 제33권6호
• /
• pp.415-421
• /
• 2009

최근 들어서 부산항의 환적화물 처리량이 크게 감소하는 등 국내 항만 물동량이 예측치를 크게 밑돌고 있다. 이에 따라 과거 급증했던 환적화물 처리를 위해 계획된 국내 항만개발계획의 대폭적인 수정이 불가피한 상황이며, 항만 물동량 유치가 그 어느 때 보다도 중요한 실정이다. 이러한 상황에서 본 연구는 중국과 더불어 국내 항만의 2대 환적시장인 일본을 대상으로 일본 수출입 화물을 부산항에서 환적 처리하는 경우 물류비 절감효과를 파악하는 것을 목적으로 하였다. 이를 위해 일본 서안지역 항만 화물운송 패턴을 3가지 시나리오로 구분하여 물류비를 비교 분석하여 부산항을 이용할 경유 예상되는 물류비 절감효과와 화물유치를 위한 시사점을 제시하였다.

• 한국산림과학회지
• /
• 제95권3호
• /
• pp.268-273
• /
• 2006

이 연구는 국내 제재 산업에서 생산요소의 가격변화가 기술변화에 어떻게 영향을 미쳤는지 알아보기 위한 연구다. 이론적 모델로는 초월대수 비용함수(Translog Cost Function)를 이용하였으며 1970년부터 2003년까지 시계열 자료를 이용한 계량경제분석을 통해 생산요소 가격의 변화가 한국의 제재 산업의 기술적 특성에 어떠한 영향을 미쳤는지 추정하였다. 추정결과에서 국내 제재산업은 생산구조에서 노동, 자본이 서로에 대해 대체 관계를 가지고 있고, 특히 자본재가 노동력을 대체하는 수단으로 보다 탄력적으로 변화되었다. 또한, 노동가격의 상승으로 인해 국내제재산업은 노동절약적, 자본사용적, 원목사용적 기술로 발전하여 왔다. 현재 국내제재산업에는 규모의 경제(Economy of scale)가 여전히 작용하고 있고, 자본 투자를 통한 규모증대는 단위생산 비용을 절감하고 생산성을 향상시킬 수 있을 것이다.

• 대한건축학회논문집:구조계
• /
• 제35권3호
• /
• pp.43-48
• /
• 2019

Since the revision of the Rationalization of Energy Use Law, the spread of new and renewable energy in buildings has been promoted. In addition, the production of electric power and thermal energy is an important issue in the change of energy paradigm centered on the use of distributed energy. Among them, geothermal energy is attracting attention as a high-performance energy-saving technology capable of coping with heating / cooling and hot water load by utilizing the constant temperature zone of the earth. However, there is a disadvantage that the initial investment cost is high as a method of calculating the capacity of a geothermal facility by calculating the maximum load. The disadvantages of these disadvantages are that the geothermal energy supply is getting stagnant and the design of the geothermal system needs to be supplemented. In this study, optimization design of geothermal system was carried out using optimization tool. As a result of the optimization, the ground heat exchanger decreased by 30.8%, the capacity of the heat pump decreased by 7.7%, and the capacity of the heat storage tank decreased by about 40%. The simulation was performed by applying the optimized value to the program and confirmed that it corresponds to the load of the building. We also confirmed that all of the constraints used in the optimization design were satisfied. The initial investment cost of the optimized geothermal system is about 18.6% lower than the initial investment cost.

• 한국건축시공학회지
• /
• 제2권2호
• /
• pp.121-127
• /
• 2002

The functions and uses of existing buildings are not properly changing as modern life needs. As a result, the frequent reconstruction(construction after removal) of existing buildings have been done but it became more and more difficult because of strengthening of regulations and systems concerning construction. And also it has several disadvantages like lower plot ratio and site coverage than existed buildings, enormous construction cost, production of waste-construction materials and thoughtless consumption of natural resources, which gives rise to environmental pollution. Therefore renovation is brought to the fore. In Korea, many business buildings were constructed in 1960s-1970s, during the period of high growth. Such buildings needs to be repaired in whole. It is caused by the change of social, economic, and cultural conditions and deterioration of equipments. Therefore renovation meets some necessary conditions; recovery of building functions and extension of building life span. In case study, the present state of renovation in business buildings is 1) Basic safety, for example, fire prevention and crime prevention, is great important. 2) Advanced technology, INS(international news service), IBS(Intelligent Building System), and internationalization, is pursued for adapting to multimedia ages. 3) It tries to promote proficiency, and to save the energy using spatial environment and natural energy(light and sound). Also, improving comfortable level of users and installing equipments for physically handicapped person needs to be considered.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.149-153
• /
• 2002

The commutator of an automotive fuel pump motorhas been produced through various processes such as forging, segmenting, and assembling. And the conventional method producing the commutator of an automotive fuel pump motor is not appropriate for saving material and cost, because it makes each segment separated one by one. Therefore a new process design is required in order to avoid the assembling process. In this study, a new process design of the commutator has been carried out to save material and manufacturing time by FE analysis. In the FE analysis, three forging processes are proposed for producing copper(ASTM C11000) commutator of an automotive fuel pump motor. And forging experiments are performed to make an unsegmented commutator in order to verify the theoretically proposed process. And then, in order to get the final product the forged commutator is passed through various postprocessing such as machining, bending, resin forming, and shearing process. From the experimental result the forging process proposed from the FE analysis is verified to be an economical method for producing the commutator for an automotive fuel pump motor.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.122-125
• /
• 2005

Magnesium alloys are expected to be widely used for the parts of structural and electronic applications due to their lightweight and EMI shielding characteristics. While the die casting has been mainly used to manufacture the parts from the magnesium alloys, the press forming is considered as an alternative to the die casting for saving the manufacturing cost and improving the structural strength of the magnesium alloy parts. However, the magnesium alloy has low formability at room temperature and therefore, in many cases, forming at elevated temperatures is necessary to obtain the required material flow without failure. In the present study, square cup deep drawing tests using the magnesium alloy AZ31 sheet were experimentally conducted at various elevated temperatures as well as room temperature, and the corresponding finite-element simulations, which calculated the damage evolution based on the Oyane's criterion, were conducted using the stress-strain relations from the tensile tests at various temperatures. The formability predictability by the finite-element analysis was investigated by comparing the predicted damage distributions over the deformed AZ31 sheet at elevated temperatures with the corresponding experimental deformations with failures.

• 조명전기설비학회논문지
• /
• 제28권4호
• /
• pp.42-48
• /
• 2014

Sewage treatment facilities can purify sewage enough to be send to river or sea water, that discharged from human life and industrial activities. In the sewage treatment process, we can get large amount of by-product energy resources and materials such as heat of sewage, digester gas and purified water etc., it can be utilized by applying various technologies thereby we can reduce energy consumption in the process. In this paper, it was analyzed using the data collected from the operational case study for the energy savings effect that can be obtained when using the digester gas, one of the by-product materials of sewage treatment process, for electric power generation. Cost of 623million won is an annual reduction of 4,032MWh corresponding 9% of the annual electricity consumption of the sewage treatment plant, such an alternative power generation using digester gas was proposed in this paper has been verified the feasibility of the proposed reduction of energy.

• 한국생산제조학회지
• /
• 제18권5호
• /
• pp.483-490
• /
• 2009

The objective of this development project is to localize an automatic molten metal supplier that has been distributed by WESTOMAT, Germany, throughout the world. To achieve this purpose, an energy-saving pressurized dosing furnace and molten metal differential pressure control system that Is able to automatically supply a determined quantity of aluminum molten metal were developed. The localized equipment was installed in a site. Also, the results of the test operation of this equipment can be summarized as follows: It was able to improve the productivity because there were small decreases in supplying speeds and small losses in wastes compared to the existing mechanical molten metal supplier. Also, it was able to minimize the cost in maintenances due to the direct application of high temperature molten metals to molds. In addition, there were small energy losses due to the use of high thermal insulators compared to the existing reverberating furnace and able to prolong the life-time of furnaces and produce good quality nonferrous metals because it represented small carbon refractories and alumina in applied molten metals. Furthermore, it demonstrated no particular differences by objectively comparing it with the product by WESTOMAT.

• 한국응용과학기술학회지
• /
• 제36권2호
• /
• pp.479-487
• /
• 2019

The purpose of this study is to present a caddie education program that can improve the performance of golf caddies in China by comparing and analyzing the golf caddie education programs in South Korea and China. Caddie education programs were collected from 4 golf clubs, 3 professional caddie education institutions and 8 public institutions in South Korea and 6 golf clubs and 2 professional caddie education institutions in China. The following results were obtained. Although the caddie training in China is conducted over more time and term than in South Korea, it is necessary to have an education program considering golf expertise and quality of customer service. Therefore, the caddie education program in China is composed of golf related education(golf etiquette, golf practice skill), caddie duty training(safety management, customer service and image making), and training for caddie(fitness management, injury prevention, skin care, and cost-saving etc.). In the future, the Chinese golf club industry will has a potential to develop. In order to provide a consistent and systematic education, manual training on caddie education and training on caddie master to manage caddies should be conducted.

• Asia Pacific Journal of Business Review
• /
• 제3권1호
• /
• pp.19-38
• /
• 2018

The energy intensity of Nepal is economically not worthy, lacks eco-friendly and importantly not sustainable, and almost four times the average global energy intensity. Considerable efforts have been exercised to reduce the energy gap yet, it is still much to achieve. Nation priority on energy sector was envisaged with promulgation of investment friendly rules and law in hydropower and renewable technology even though, could not harness the sufficient energy. In amid of this acute energy crisis, the government launched the Nepal Energy Efficiency Programme (NEEP) with technical assistance from German International Cooperation (GIZ). Energy Efficiency (EE) practice is the most cost-effective method to reduce the supply and demand gap, reduce on greenhouse gases and pollution, and deter on import of petroleum products which finally improves on trade imbalance. This paper had proposed a framework of energy management team to promote energy efficient technologies in residential consumer. The energy management teams study the past records of energy use pattern of consumers and suggest appropriate technology for energy saving options. The paper provides some reviews of energy efficiency initiatives undertaken by the concern regulatory body which highlights the current status. The comprehensive knowledge acquired through exploratory research is implemented in this paper to identify the various barriers that domestic consumer is experiencing towards the active participation in energy efficiency program launched by the Government of Nepal.