• Journal of the Korean Operations Research and Management Science Society
• /
• v.14 no.2
• /
• pp.139-139
• /
• 1989

Recently banking industry is experiencing fundamental changes by advancement of information technology. The traditional role of branches is rapidly being replaced with new electronic service channels such as ATM. Phone and PC for they are time-saving and convenient. Automated service channel strategy of retail banks is divided into two different ways, automation and networking. Automation is mainly focused on cost reduction related to the branch operation, while networking is on expansion of customer contact points. Strategic types of banks can be defined from a matrix model where the positioning is determined by the extent of automation and networking. The effectiveness of automated channel strategy depends on how separate strategic types show their performance. Results for deposits and productivity will be given to verify the economic performance of each strategic type.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.613-618
• /
• 2008

As one way of cost innovation and weight saving of the automobile, the one-piece typed lower control arm was developed for the purpose of replacing the box typed lower control arm. In order to overcome less buckling strength of the one-piece typed lower control arm, the design parameters such as the high strength steel grade, the thickness and the shape of main panel were optimized based on Taguchi method.

• Journal of Korea Foundry Society
• /
• v.15 no.5
• /
• pp.477-482
• /
• 1995

A computer simulation model of various smelting process for melting waste sand was developed by using energy and material balance concept. This model can predict the coal, flux and oxygen consumption and the volume and temperature of off-gas. The major critical variables for smelting process can be explained by using the analysis of energy and material balance. The major conclusions were as follows; 1. The most important variables for smelting process were high post-combustion ratio, high heat transfer efficiency and refractory protection technology. 2. For saving energy in this smelting process, selection of raw materials i.e coal, flux are very important, espacially using of low volatile coal is very profitable. 3. The treatment cost of waste sand is high and environmental restriction is severe, in this reason we must be concerned in the treatment of waste sand by smelting process.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.34-36
• /
• 2005

Copper wire bonding is an alternative interconnection technology that serves as a viable and cost saving alternative to gold wire bonding. In this paper, ultrasonic wedge bonding with $25{\mu}m$ copper wire on Au/Ni/Cu metallization of a PCB substrate was performed at ambient temperature. The central composite design of experiment (DOE) approach was applied to optimize the copper wire wedge bonding process parameters. After that, pull test of the wedge bond was performed to study the bond strength and to find the optimum bonding parameters. SEM was used to observe the cross section of the wedge bond. The pull test results show good performance of the wedge bond. Additionally, DOE results gave the optimized parameter for both the first bond and the second bond. Cross section analysis shows a continuous interconnection between the copper wire and Au/Ni/Cu metallization. The diffusion of Cu into the Au layer was also observed.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.714-715
• /
• 2006

The Application of powder metallurgy (PM) aluminum structural parts is at its early growing stage, despite of some automotive applications. The market potential for PM aluminum, however, is large. Growth is expected from the market expansion of the existing applications and new applications, including the replacements of aluminum and zinc based castings and some ferrous PM automotive parts by PM aluminum. Compared to castings, PM is an efficient mass production technology. The PM aluminum is more competitive than die casting for some automotive applications. Besides weight saving leading to performance improvement, the total cost increase for aluminum PM parts is less than 15% compared to ferrous PM automotive parts. The future is promising for PM aluminum.

• Journal of Environmental Science International
• /
• v.25 no.10
• /
• pp.1389-1396
• /
• 2016

A monitoring system for a field magnetometer was configured with assistance of a Raspberry Pi as a data logger. The suggested geomagnetic system uses a semi-real-time data transmission module. The system consists of two parts: a field-observation part and a data-center part. The field-observation part comprises a Raspberry Pi, magnetometer, LTE router, and power source, while the data center part takes samples at the site. The collected magnetometer data are then sent to the data center through the LTE router. The newly designed monitoring system was deployed and checked in Jeju-do island, and found to operate stably. The suggested system is promising in that it is simple and cost saving, providing at least physical insight and knowledge on the complex natural phenomena.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.393-408
• /
• 1997

In the early 1990s, as Korean automobile industry has made rapid progress due to favorable trend in domestic demand and steady increase of export it is very important to analyze the extents of competitiveness and the trends of change in the field of production. In this dissertation, the current situation of our competitiveness and its changes in the field of production are synthetically reviewed through examining productivity and quality, that is output, as well as other overall factors related in the process of production. And this analysis reassures that first of all, our prior tasks lie in the quality and volume of production, and we should develope competitiveness through multilateral innovation of management Now in order to meet these prior tasks, we must secure our own technology design and ability for innovaton ; enlarge overseas local production technical tie-up with leading companies and develop M&A for globalization ; improve price competitiveness, construct cooperation of labor and capital, and improve the structure of finance for innovation of management saving the cost ; establish the new method of production for the preparation of increasing overseas investment in near future.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.4
• /
• pp.233-237
• /
• 2011

This study was carried out to investigate the seedling establishment and yield of direct-sown Platycodon grandiflorus seeds cultured by three ridge width, 0.4, 0.8, and 1.2 m and four mulching materials, rice straw, rice bran, black plastic film, and no mulching in upland. Seedling establishment rate (70%) was the highest in rice straw mulched plot of 500 seeds/$m^2$ sowed and root yield after one year was also the highest in rice straw mulched treatment and followed by rice bran, no mulching, and black plastic film treatment. In this result, ridge width 120cm and rice straw mulching combined treatment was best for getting the highest seedling establishment ratio and seedling numbers per area. However, ridge width and mulching materials should be considered soil moisture content and weed population for saving labor cost.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.4
• /
• pp.137-144
• /
• 2002

In the modern age. Building is getting higher and larger according to owner and social demands. Now when we are facing the need of the cost down and the reduction of economic loss. In this paper, the characteristics of the present conditions of site management were investigated with the field survey. And The Purpose of this study is to suggest the rational plans of construction planning in site management. The method of site management. however depends on experience of a construction manager. in order to solve this situation, it is necessary to create a method of site management that is adequate for the condition of construction. By cultivating excellent sub contractors, we can expect precise construction with a few experts. improvement in qualify of construction from standardization, computerization of each process. And the expectancies of this paper are that it can be used as efficient data for improvement of system to systematize site management work in Korea.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.1
• /
• pp.12-18
• /
• 2003

Recently the research for utilization of waste heat produced from electric power plants, casting factories, heat treating factories or commercial building are being afforded by the need for energy saving. The objective of this study is to develop a thermoelectric generation system which converts unused energy from close-at-hand sources such as garbage incineration heat and industrial exhaust etc. into electricity. This paper presents a thermoelectric technology on a optimum system design method and efficiency and cost effective thermoelectric element on order to extract the maximum power output from energy conversion of waste energy. It is shown that the longitudinal stresses of module contacted with two point constrained AI tubes could be released more than those with a one-point constrained.