• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.2
• /
• pp.306-314
• /
• 2008

General metal welding occurs distortion. Also, reducing distortion is required much cost. Therefore, the purpose of this study is optimization of welding conditions to reduce distortion in welding of monolithic rack housing for modular steering gear. Firstly, heat source for welding was chosen arc and laser. Secondly, it investigated optimizing welding conditions in bead welding by arc and laser heat source, and welding conditions in fillet welding was optimized with welding shapes. Finally, it was measured temperature distribution of welds by infrared camera and angle distortion in fillet welding. As a result, laser welding was superior to arc welding on distortion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.667-667
• /
• 2013

Optimizing morphology of the front surface with three dimensional structures (3D) in solar cell is essential element for not only effectivelight harvesting but also carrier collection and separation without the cost burden in process. We designed a three-dimensionally ordered front surface with wet chemical etching. Wet chemical etching is a proper way to have three dimensional structures. The method efficiently transmits the incident light at the front surface to a Si absorber and has competitive price in manufacturing when comparing with reactive ion etching (RIE) to have three dimensional structures. This indicates that optimized front surface with three dimensional structures by wet chemical etching will bring effective light management in solar cells.

• Korean Management Science Review
• /
• v.19 no.2
• /
• pp.75-89
• /
• 2002

According to the fast-paced environment of information technology and improving customer services, the design activities of logistics systems improve customer centric services and delivery performance implementing e-logistics system. The fundamental design issues that arise in the delivery system planning are optimizing the system with minimum cost and maximum throughput and service level. This study is concerned with the integrated model development of delivery system with customer responsive service level for DCM, Demand Chain Management. We used a two-step approach for this study. First, we formulated the supply. center facility planning using stochastic set-covering problem and assigned the customers to the supply center using clustering algorithm. Second, we developed vehicle delivery planning for a supply center based on GIS, GIS-VRP. Also we developed a GUI-type computer program for proposed method for supply center problem using GIS and Geo-DataBase of Busan area. The computational results showed that the proposed method was very effective on a set of test problems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.10
• /
• pp.23-27
• /
• 2011

In this paper, material handing cleanroom stocker system for thin film solar cell line of photovoltaic industry and liquid crystal display line of flat panel display industry was selected for the study. Optimum solution for stocker system's CPS(Contactless Power Supply) is approached by changing the motion pattern, optimizing design & production, and analyzing characteristics of the power system. As a result, acceleration time of X-Axis changed from 3 sec to 4 sec, changed the input characteristic of CPS within approximately 11[kW]. This result shows that extending acceleration time of the X-Axis in Stocker Crane's motion pattern can reduce the capacity of the CPS, thus saving the manufacturing cost.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.15 no.1
• /
• pp.83-97
• /
• 1990

We consider an insured who wishes to determine his optimal reporting strategy over a given planning horizon, when he has option of reporting of not reporting his at-fault accidents. Assuming that the premium in future period is continually adjusted by the insured's loss experience, the insured would not report every loss incurred. Rather, considering the benefits and costs of each decision, the insured may want to seek a way of optimizing his interests over the planning horizon. The situation is modeled as a dynamic programming problem. We consider an insured's discounted expected cost minimization problem, where the premium increase in future period is affected by the size of the current claim. More specifically, we examine two cases ; (1) the premium increase in the next is a linear function (a constant fraction) of the current claim size; (2) the premium increase in the next period is a concave function of the current claim size. In each case, we derive the insured's optimal reporting strategy.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.75-87
• /
• 2012

A design paradigm using sequential geometric programming is presented to accurately design CMOS op amps with BSIM3. It is based on new adaptive modeling of transistor parameters through the operating point simulation. This has low modeling cost as well as great simplicity and high accuracy. The short-channel dc, high-frequency small-signal, and short-channel noise models are used to characterize the physical behavior of submicron devices. For low-power and low-voltage design, this paradigm is extended to op amps operating in the subthreshold region. Since the biasing and modeling errors are less than 0.25%, the characteristics of the op amps well match simulation results. In addition, small dependency of design results on initial values indicates that a designed op amp may be close to the global optimum. Finally, the design paradigm is illustrated by optimizing CMOS op amps with accurate transfer function.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.11
• /
• pp.47-55
• /
• 1997

In general, processing flow of the conventional floating-point multiplication consists of either multiplication, addition, normalization, and rounding stage of the conventional floating-point multiplier requries a high speed adder for increment, increasing the overall execution time and occuping a large amount of chip area. A floating-point multiplier performing addition and IEEE rounding in parallel is designed by using the carry select addder used in the addition stage and optimizing the operational flow based on the charcteristics of floating point multiplication operation. A hardware model for the floating point multiplier is proposed and its operational model is algebraically analyzed in this paper. The proposed floating point multiplier does not require and additional execution time nor any high spped adder for rounding operation. Thus, performance improvement and cost-effective design can be achieved by this suggested approach.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.1
• /
• pp.38-44
• /
• 2002

In manufacturing die and mold, polishing: is important as it takes as much as 50% of the production cost. In this research, an attachable type polishing device to a WC machining center was developed. experiments were done with a special1y designed rotation type polishing device. Also an ultra-sonic (vibration type) waving device was introduced to acquire finer surface finishes. From the constructed data base based on the experimental results, it is shown that optimal polishing conditions are generated by the combined use of the rotation type tool and the vibration type tool.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.1
• /
• pp.45-51
• /
• 2002

To reduce the cost and increase reliability of die and mold products, automation of the finishing (polishing) process is essential. A major element of automation is a reliable database and a knowledge base for polishing status. This paper presents a polishing expert system which can determine optimal polishing sequences and conditions by using an empirical formula and an experimental database. The simplex method was used for the curve fittings of the experimental results. Also a graphical user interface, which visualizes the optimized results, was developed.

• Advances in Computational Design
• /
• v.2 no.3
• /
• pp.241-256
• /
• 2017

This paper introduces the process for Multi-objective Optimization Framework (MOF) which mediates multiple conflicting design targets. Even though the extensive researches have shown the benefits of optimization in engineering and design disciplines, most optimizations have been limited to the performance-related targets or the single-objective optimization which seek optimum solution within one design parameter. In design practice, however, designers should consider the multiple parameters whose resultant purposes are conflicting. The MOF is a BIM-integrated and simulation-based parametric workflow capable of optimizing the configuration of building components by using performance and non-performance driven measure to satisfy requirements including build programs, climate-based daylighting, occupant's experience, construction cost and etc. The MOF will generate, evaluate all different possible configurations within the predefined each parameter, present the most optimized set of solution, and then feed BIM environment to minimize data loss across software platform. This paper illustrates how Multi-objective optimization methodology can be utilized in design practice by integrating advanced simulation, optimization algorithm and BIM.