• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1902-1907
• /
• 2007

This paper suggests improvements in travel cost function of transit assignment model by analysing existing model. Two types of travel cost function are widely used for congested public networks. The one is used for strictly restricting public transport capacity. Another is non-decreasing function such as BPR function. In this paper, we analyse two types of travel cost function in case of intercity rail. The characteristics of intercity rail are different from those of public transit in urban area. Therefore travel cost function must be differently applied in each case.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제1권1호
• /
• pp.35-46
• /
• 2001

Replacement policy of a degradation system is investigated by incorporating the loss function. Loss function is defined by the deviation of the value of quality characteristic from its target value, which determines the loss cost. Cost function is comprised of the inspection cost, replacement cost and loss cost. Two cost minimization problems are formulated : 1)determination of an optimal inspection period given the state for the replacement and 2)determination of an optimal state for replacement under fixed inspection period. Simulation analysis is performed to observe the variation of total cost with respect to the variation of the parameters of loss function and inspection cost, respectively As a result, parameters of loss function are seen to be the most sensitive to the total cost. On the contrary, inspection cost is observed to be insensitive. This study can be applied to the replacement policy of a degradation system which has to produce the quality critical product.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권2호
• /
• pp.218-226
• /
• 2023

In Korea, we still use function point based cost estimations for software size and cost of a project. The current problem is that we make difficultly calculating function points with requirements and also have less accurate. That is, it is difficult for non-experts to analyze requirements and calculate function point values with them, and even experts often derive different function points. In addition, all stakeholders strongly make the validity and accuracy of the function point values of the project before /after the development is completed. There are methods for performing function point analysis using source code [1][2][3][4] and some researchers [5][6][7] attempt empirical verification of function points about the estimated cost. There is no research on automatic cost validation with source code after the final development is completed. In this paper, we propose automatically how to calculate Function Points based on natural language requirements before development and prove FP calculation based on the final source code after development. We expect validation by comparing the function scores calculated by forward engineering and reverse engineering methods.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.561-568
• /
• 1994

A man model can be used as an effective tool to design ergonomically sound products and workplaces, and subsequently evaluate them properly. For a man model to be truly useful, it must be integrated with a posture prediction model which should be capable of representing the human arm reach posture in the context of equipments and workspaces. Since the human movement possesses redundant degrees of freedom, accurate representation or prediction of human movement was known to be a difficult problem. To solve this redundancy problem, a psychophysical cost function was suggested in this study which defines a cost value for each joint movement angle. The psychophysical cost function developed integrates the psychophysical discomfort of joints and the joint range availability concept which has been used for redundant arm manipulation in robotics to predict the arm reach posture. To properly predict an arm reach posture, an arm reach posture prediction model was then developed in which a posture configuration that provides the minimum total cost is chosen. The predictivity of the psychophysical cost function was compared with that of the biomechanical cost function which is based on the minimization of joint torque. Here, the human body is regarded as a two-dimensional multi-link system which consists of four links ; trunk, upper arm, lower arm and hand. Real reach postures were photographed from the subjects and were compared to the postures predicted by the model. Results showed that the postures predicted by the psychophysical cost function closely simulated human reach postures and the predictivity was more accurate than that by the biomechanical cost function.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1066-1073
• /
• 2013

This paper illustrates newly an outage cost impact index function(OCIIF). The assessment of the OCIIF is described using the Web Based Online Real-time Outage Cost Assessment and Information System(WOROCAIS) for power system outage cost assessment in Korea. The proposed OCIIF is not absolute but relative outage cost impact index function in view point of outage time using web based survey method for outage cost assessment. While conventional methodology does not consider short time outage cost assessment, the proposed OCIIF reflects short time outage. SCOF(Sector Customer Outage Function) in stead of the traditional SCDF(Sector Customer Damage Function) is defined and proposed newly in this paper. Based the SCOF, AVLL(Average Value of Loss Load) is newly proposed. The OCIIF is demonstrated by WOROCAIS in case study around 2,000 sample data surveyed by KEPCO in South Korea in recent.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.392-396
• /
• 2004

The number of parameters and the number of samples are the key point of trans-log cost function which studied recently. Most of models show that the number of parameters is more than the number of samples. Therefore, these studies gave unreliability of the estimation results. First, we surveyed theoretical cases and researches for the formulation of cost function of railroad industry. Second, we will suggest trans-log cost function by analyzing cost data of KNR. And, the cumulative data will be needed for the confidence of estimation results.

• 한국경영과학회지
• /
• 제10권2호
• /
• pp.75-82
• /
• 1985

Reorganization is essential part of data base maintenanc work and the reasonable reorganization points can be determined from the trade-off between reorganization cost and performance degradation. There has been many reorganization models so far, but none of these models have assumed nonlinear search cost function. This paper presents the existensions of two existing linear reorganization models for the case where the search cost function is quadratic. The higher performance of these extended models was shown in quadratic search cost function case.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1765-1769
• /
• 2004

The number of parameters and the number of samples are the key point of trans-log cost function which studied recently. Most of models show that the number of parameters is more than the number of samples. Therefore, these studies gave unreliability of the estimation results. First, we surveyed theoretical cases and researches for the formulation of cost function of railroad industry. Second, we will suggest trans-log cost function by analyzing cost data of KNR. And, the cumulative data will be needed for the confidence of estimation results.

• 한국도로학회논문집
• /
• 제9권4호
• /
• pp.129-134
• /
• 2007

일반적으로 도로정책평가 시, 이상적인 도로 교통조건에서 수집한 교통류 자료에 근거하여 BPR식 형태로 개발한 통행비용함수식을 일반화하여 적용한다. 하지만, BPR 형태로 개발된 모형은 장래교통량예측이나 통행행태분석에 있어서 적용이 도로 교통환경을 묘사하는데 적합하지 않은 것으로 보고되고 있다.(Spiess, 1989 ; Singh, 1999) 따라서 본 연구는 이러한 문제점을 해결하기 위해, 분석대상지의 도로 교통조건에 적합하도록 미시적 교통류시뮬레이터기반(Micro traffic Simulator Based : MSB)으로 생성된 자료로 통행비용함수를 개발, 검증하는 분석방법론을 제시하였으며, 주요 연구결과는 다음과 같다. 첫째, 이상적인 도로교통조건 이외의 상황에 대한 도로교통정책 평가에 적용이 용이하도록, 단시간에 다량의 교통류 자료생성이 가능한 미시적 교통류시뮬레이터(VISSIM)를 이용하여 분석대상지에 적합한 통행비용함수를 개발하는 방법론을 제시하였다. 둘째, VISSIM을 이용하여 생성한 분석자료를 기반으로 하여 BPR 함수식과 MSB 함수식을 각각 개발하고, 통계값 및 산포도를 이용한 모형들의 비교분석을 통하여 MSB 함수식의 활용가능성을 검증하였다.

• 동력기계공학회지
• /
• 제2권3호
• /
• pp.60-67
• /
• 1998

Edge detection is the first step and very important step in image analysis. We cast edge detection as a problem in cost minimization. This is achieved by the formulation of a cost function that evaluates the quality of edge configurations. The cost function can be used as a basis for comparing the performances of different detectors. This cost function is made of desirable characteristics of edges such as thickness, continuity, length, region dissimilarity. And we use a simulated annealing algorithm for minimum of cost function. Simulated annealing are a class of adaptive search techniques that have been intensively studied in recent years. We present five strategies for generating candidate states. Experimental results(building image and test image) which verify the usefulness of our simulated annealing approach to edge detection are better than other operator.