• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.131-140
• /
• 2012

Lane markings such as edgelines, centerlines, and lines that delineate lanes generally provide drivers with the various information for safe driving. Drivers can easily recognize the lane markings through the color differences between the markings and road surfaces during the daytime. However, it is a bit difficult for drivers to perceive them during the nighttime due to the lack of artificial lights. Although the glass beads with the 1.5-refractive index have been used to improve the visibility of the lane markings during the nighttime, it is still difficult for drivers to recognize the lane markings properly, especially during the rainy nighttime, which may often lead to traffic accidents. To improve the retroreflectivity and visibility of the lane markings during the rainy nighttime, the high refractive beads with the 2.4-refractive index are essentially required, but they do not work appropriately during the dry nighttime. Thus, the mixed materials with the 1.5, 1.9, and 2.4-refractive beads should be considered for the satisfactory implementation of the lane markings. This study reveals the best mixing rates of the beads by conducting benefit-cost analysis under various weather conditions in Korea. The analysis results show that the lane markings with the 100% of the 2.4-refractive beads provide the highest visibility of lane markings regardless of the roadway conditions, but the benefit-cost (B/C) ratio of the bead mixture is merely 0.46. The best mixing rate of the beads, from the highest B/C ratio viewpoint, was identified as the mixture with a 80% of 1.5-refractive beads and a 20% of 2.4-refractive beads. Some limitations and future research agenda have also been discussed.

• The KIPS Transactions:PartD
• /
• v.15D no.4
• /
• pp.451-462
• /
• 2008

Recently, with the advent of applications using locations of moving objects, it becomes crucial to develop efficient index schemes for spatio-temporal databases. The $TPR^*$-tree is most popularly accepted as an index structure for processing future-time queries. In the $TPR^*$-tree, the future locations of moving objects are predicted based on the CBR(Conservative Bounding Rectangle). Since the areas predicted from CBRs tend to grow rapidly over time, CBRs thus enlarged lead to serious performance degradation in query processing. Against the problem, we propose a new method to adjust CBRs to be tight, thereby improving the performance of query processing. Our method examines whether the adjustment of a CBR is necessary when accessing a leaf node for processing a user query. Thus, it does not incur extra disk I/Os in this examination. Also, in order to make a correct decision, we devise a cost model that considers both the I/O overhead for the CBR adjustment and the performance gain in the future-time owing to the CBR adjustment. With the cost model, we can prevent unusual expansions of BRs even when updates on nodes are infrequent and also avoid unnecessary execution of the CBR adjustment. For performance evaluation, we conducted a variety of experiments. The results show that our method improves the performance of the original $TPR^*$-tree significantly.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.124-135
• /
• 2015

As many countries have been raising awareness of environmental issues, greater efforts for eco-friendly construction have been made in both governmental and private sectors. However, assessment circumstances for building energy performance and green building standard of legislation are still based on two dimension and handwork. This takes time, cost and labor, and makes assessment inaccurate and inefficient. Therefore, this study suggests methods to improve eco-friendly construction permission process and to automatize open BIM-based assessment of Energy Performance Index (EPI) among several eco-friendly construction certification standards. First, it analyzes the relations between assessment criteria and IFC data, and provides solutions to problems and limitations. Second, it applies the solutions to assessment program in order to automatize open BIM-based assessment for EPI. The eco-friendly construction permission process with these solutions applied will reduce time, cost, and labor by simplifying and automatizing the tasks. Also, the simplified process of design revision will improve not only productivity and efficiency but also accuracy and reliability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.387-392
• /
• 2019

A technique was researched to detect bolt looseness using a transfer impedance technique (the dual piezoelectric material technique) for monitoring the structural health of a bolt joint. In order to use the single piezoelectric material technique, an expensive impedance analyzer should be used. However, in the transfer impedance technique, low-cost fault detection can be performed using a general function generator and a digital multimeter. A steel plate frame test specimen composed of bolt joints was fabricated, and the tightening torques of the bolts were loosened step by step. By using the transfer impedance method, the damage index was obtained. It was found that the presence of faults could be reasonably estimated using the damage index, which increased with the degree of bolt looseness. An experiment was performed on the same specimen using the single piezoelectric material technique, and the results showed a similar tendency. It could be possible to estimate the damage of a bolt joint at low cost by eliminating the expensive impedance analyzer. This method could be used effectively for structural health monitoring after carrying out a study to estimate the fault location and severity.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.1
• /
• pp.13-19
• /
• 2020

This study compared RGB color images with canopy light interception (LI) and leaf area index (LAI) measurements for low cost and low labor. LAI and LI were measured from vertical gap fraction derived from top of digital image in soybean canopy cover (cv Daewonkong, Deapongkong and Pungsannamulkong). RGB color images, LAI, and LI were collected from V4.5 stage to R5stage. Image segmentation was based on excess green minus excess red index (ExG-ExR). There was a linear relationship between LAI measured with LI (r²=0.84). There was alinear relation ship between LI measured with canopy cover on image (CCI) (r²=0.94). There was a significant positive relationship(r²=0.74) between LAI and CCI at all grow ingseason. Therefore, it is expected that in the future, the RGB color image could be able to easily measure the LAI and the LI at low cost and low labor.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.71-91
• /
• 2018

In recent years, application of UAV(Unmanned Aerial Vehicle) to seed sowing and pest control has been actively carried out in the field of agriculture. In this study, UAS(Unmanned Aerial System) is constructed by combining image sensor of various wavelength band and SfM((Structure from Motion) based image analysis technique in UAV. Utilization of UAS based vegetation survey was investigated and the applicability of precision farming was examined. For this purposes, a UAS consisting of a combination of a VIS_RGB(Visible Red, Green, and Blue) image sensor, a modified BG_NIR(Blue Green_Near Infrared Red) image sensor, and a TIR(Thermal Infrared Red) sensor with a wide bandwidth of $7.5{\mu}m$ to $13.5{\mu}m$ was constructed for a low cost UAV. In addition, a total of ten vegetation indices were selected to investigate the chlorophyll, nitrogen and water contents of plants with visible, near infrared, and infrared wavelength's image sensors. The images of each wavelength band for the test area were analyzed and the correlation between the distribution of vegetation index and the vegetation index were compared with status of the previously surveyed vegetation and ground cover. The ability to perform vegetation state detection using images obtained by mounting multiple image sensors on low cost UAV was investigated. As the utility of UAS equipped with VIS_RGB, BG_NIR and TIR image sensors on the low cost UAV has proven to be more economical and efficient than previous vegetation survey methods that depend on satellites and aerial images, is expected to be used in areas such as precision agriculture, water and forest research.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.395-408
• /
• 2015

High-resolution satellite image mosaics are becoming increasingly important in the field of remote sensing image analysis as an essential image processing to create a large image constructed from several smaller images. In this paper, we present an automatic seamline extraction technique and the procedure to generate a mosaic image by this technique. For more effective seamline extraction in the overlap region of adjacent images, an NDVI-based seamline extraction technique is developed, which takes advantage of the computational time and memory. The Normalized Difference Vegetation Index(NDVI) is an index of plant "greeness" or photosynthetic activity that is employed to extract the initial seamline. The NDVI can divide into manmade region and natural region. The cost image is obtained by the canny edge detector and the buffering technique is used to extract the ranging cost image. The seamline is extracted by applying the Dijkstra algorithm to a cost image generated through the labeling process of the extracted edge information. Histogram matching is also conducted to alleviate radiometric distortion between adjacent images acquired at different time. In the experimental results using the KOMPSAT-2/3 satellite imagery, it is confirmed that the proposed method greatly reduces the visual discontinuity caused by geometric difference of adjacent images and the computation time.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1141-1147
• /
• 2006

In order to applicate a newly method for powdered activated carbon(PAC) selection based on economic efficiency, PAC adsorption tests were performed for removal of MIB and dissolved organic carbon(DOC) in drinking water supplies. The removal rate of MIB increased when the PAC dose increased. The Coal-based PACs were superior for adsorption of MIB compared to wood-based PACs. PAC adsorption of DOC and $UV_{254}$ were a little different for different PACs and types of raw water, but both were lower than adsorption of MIB. Among the tested PACs, the one called P-1000 was most effective for removal of MIB, DOC and $UV_{254}$. Most of the organics in the tested samples were proven by excitation emission matrix(EEM) results to be fulvic-like materials. Especially, fulvic-like materials, humic-like materials, and soluble microbial byproduct(SMP)-like materials decreased after contact with PAC. P-1000 which had the lowest MIB cost index(MCI) was selected as the optimum PAC for the target water. PAC efficiency and treatability, particle size and distribution, and the cost associated with PAC dosing for MIB removal according to DOC concentration should all be considered before making the final selection of the best PAC for the target water.

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.35-46
• /
• 2009

This paper presents an evaluation index for the supply levels of pedestrian facilities in residential area planning. The pedestrian facility supply levels reveal the quality of a residential area, and can be associated with the resident living standards and satisfaction, pedestrian safety levels, and the effectiveness of the construction cost. This research conducted multifaceted procedures for the index development, and these procedures start first by identifying dominant influencing factors on pedestrian travel demand by reviewing the final reports of site planning in more than eight already-completed residential development sites. Second, based on the Space Syntax model, which was initially developed in the UK by establishing statistical relationships among an integration index, population size (persons/day), and the total development area, this research formulated a set of pedestrian demand estimation models. Then these models were utilized in forming a pedestrian facility supply index by integrating the new models and their results with the available accepted practice in the residential planning sector. This was necessary because planners want to understand the total supply level of pedestrian facilities in a residential area during the initial design stage. Finally, to test the model validity in satisfying pedestrian satisfaction, the research included a resident satisfaction interview, and it was revealed that the evaluation index developed in this research could provide planners and engineers with more promising results. It is therefore anticipated that this research can be of service when designing pedestrian facilities in future residential area planning and design activities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.600-608
• /
• 2017

This study analyzed the management index, debt ratio, and business performance of livestock agricultural farming corporations since the Korea international financial reporting standards (K-IFRS) was introduced in 2011. In addition, this study was based on credible accounting reports by the financial supervisory service's DART (data analysis, retrieval and transfer) system. First, after analyzing the key management index, the results showed that the current ratio, debt ratio, and current liabilities ratio decreased and the ratio of the owners increased on the safety index. Regarding the profitability index, the ROA (return on total assets), ROE (return on equity), and ROS (return on sales) increased slightly in 2014 compared to 2013. The overall growth and external growth on the growth index have not increased. Second, an analysis of the debt ratio and business performance, the debt ratio has a negative effect on the ROA and ROS. These results show that the use of debt of livestock agricultural farming corporations contributes to the external growth but it has a negative effect on business performance. These results show that management should consider solutions for the increase in sales to achieve cost reductions. In addition, the debt ratio should be reduced and solutions for an increase in revenue are needed to reduce management expenses, such as propagation of technical development.