• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.5
• /
• pp.1-10
• /
• 2002

Efficient processing of expensive queries that include joins and/or aggregate functions is crucial in data warehousing environment since there reside enormous volume of data. In this paper, we propose a new method for processing of queries that have both of joins and aggregate functions. The proposed method first performs grouping of the dimension table and then processes join by using the bitmap join index. This makes only the fact table accessed for processing aggregate functions, and thus resolves the serious performance degradation of the existing method. For showing the superiority of the proposed method, we suggest the cost models for the proposed and existing ones, and perform extensive simulations based on the TPC-H benchmark.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.1
• /
• pp.32-42
• /
• 2018

The importance of facility maintenance management cannot be overemphasized in that not only the value but also the performance of the facility is determined by the level of maintenance. The maintenance cost of the facility ranges from 3 to 10 times the initial construction cost depending the type and use of the facility over the life span. This maintenance importance is increased for the group of facilities and even more critical when the facilities compete for the limited budget with the limited resources such as manpower and equipment. This study analyzed sixteen public facility management corporations primarily for three items: 1) facility management system, 2) long-term rehabilitation plan, 3) the rehabilitation selection system. This paper provides and recommends the key elements of the facility maintenance management system based on the analysis of the sixteen corporations.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.181-192
• /
• 2010

We develop a dispatching policy for stochastic scheduling simulation especially for a continuous manufacturing system with machine breakdowns. The proposed dispatching policy computes an urgency index with the consideration of re-heating, setup cost and remaining due date. Prioritized by the index, we execute swapping or reassigning material sequences so as to minimize the total penalty cost. To evaluate the performance of the proposed policy, a discrete event simulation is developed. With 200 data sets and 20 iterations, we compare the performance of the urgency policy with those of SPT (Shortest Processing Time) and FCFS (First Come First Serve) which are the most common policies. The result shows that the proposed policy consistently gives the lowest total costs by reducing the penalty costs for lateness.

• Journal of KIISE:Databases
• /
• v.33 no.1
• /
• pp.1-11
• /
• 2006

It is possible to track the moving vehicle as well as to develop the location based services actively according to the progress of wireless telecommunication and GPS, to the spread of network, and to the miniaturization of cellular phone. To provide these location based services, it is necessary for an index technique to store and search too much moving object data rapidly. However the existing indices require a lot of costs to insert the data because they store every position data into the index directly. To solve this problem in this paper, we propose a buffer node operation and design a GU-tree(Group Update tree). The proposed buffer node method reduces the input cost effectively since the operation stores the moving object location data in a group, the buffer node as the unit of a non-leaf node. hnd then we confirm the effect of the buffer node operation which reduces the insert cost and increase the search performance in a time slice query from the experiment to compare the operation with some existing indices. The proposed tufter node operation would be useful in the environment to update locations frequently such as a transportation vehicle management and a tour-guide system.

• Nuclear Engineering and Technology
• /
• v.37 no.1
• /
• pp.91-100
• /
• 2005

Kyung-hee Thorium Fuel (KTF), a heterogeneous thorium-based seed and blanket design concept for pressurized light water reactors, is being studied as an alternative to enhance proliferation resistance and fuel cycle economics of PWRs. The proliferation resistance characteristics of the KTF assembly design were evaluated through parametric studies using neutronic performance indices such as Bare Critical Mass (BCM), Spontaneous Neutron Source rate (SNS), Thermal Generation rate (TG), and Radio-Toxicity. Also, Fissile Economic Index (FEI), a new index for gauging fuel cycle economy, was suggested and applied to optimize the KTF design. A core loaded with optimized KTF assemblies with a seed-to-blanket ratio of 1: 1 was tested at the Korea Next Generation Reactor (KNGR), ARP-1400. Core design characteristics for cycle length, power distribution, and power peaking were evaluated by HELIOS and MASTER code systems for nine reload cycles. The core calculation results show that the KTF assembly design has nearly the same neutronic performance as those of a conventional $UO_2$ fuel assembly. However, the power peaking factor is relatively higher than that of conventional PWRs as the maximum Fq is 2.69 at the M$9^{th}$ equilibrium cycle while the design limit is 2.58. In order to assess the economic potential of a heterogeneous thorium fuel core, the front-end fuel cycle costs as well as the spent fuel disposal costs were compared with those of a reference PWR fueled with $UO_2$. In the case of comprising back-end fuel cycle cost, the fuel cycle cost of APR-1400 with a KTF assembly is 4.99 mills/KWe-yr, which is lower than that (5.23 mills/KWe-yr) of a conventional PWR. Proliferation resistance potential, BCM, SNS, and TG of a heterogeneous thorium-fueled core are much higher than those of the $UO_2$ core. The once-through fuel cycle application of heterogeneous thorium fuel assemblies demonstrated good competitiveness relative to $UO_2$ in terms of economics.

• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.263-271
• /
• 2021

Optoelectronic shooting training systems are used in shooting training sites to improve the accuracy of shooting by tracking the trajectories of gun movements. However, optoelectronic-based systems have limitations in terms of cost, complexity of installation, and the risk that electronic targets may be broken. In this study, we developed and verified a shooting training system that measures postural tremors using a low-cost accelerometer. The acceleration sensor module was designed to be attached to the air cylinder of a gun. Postural tremors were evaluated based on amplitude, frequency, and spatial pattern index, which were computed using acceleration data. The postural tremor indices between the accelerometer and optoelectronic-based system were highly correlated (left-right and up-down directions: r = 0.76 and r = 0.70, respectively). We validated the developed shooting training system using an independent two-sample t-test, which identified a significant difference (p < 0.05) in the calculated postural tremor index according to the athlete's shooting score (i.e., best and worst shots).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.159-164
• /
• 2019

Weed control is a crucial practice not only in organic farming, but also in modern agriculture because it can lead to loss in crop yield. In general, weed is distributed in patches heterogeneously in the field. These patches vary in size, shape, and density. Thus, it would be efficient if chemicals are sprayed on these patches rather than spraying uniformly in the field, which can pollute the environment and be cost prohibitive. In this sense, weed detection could be beneficial for sustainable agriculture. Studies have been conducted to detect weed patches in the field using remote sensing technologies, which can be classified into a method using image segmentation based on morphology and a method with vegetative indices based on the wavelength of light. In this study, the latter methodology has been used to detect the weed patches. As a result, it was found that the vegetative indices were easier to operate as it did not need any sophisticated algorithm for differentiating weeds from crop and soil as compared to the former method. Consequently, we demonstrated that the current method of using vegetative index is accurate enough to detect weed patches, and will be useful for farmers to control weeds with minimal use of chemicals and in a more precise manner.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.85-90
• /
• 2019

This paper related with the M-CMA adaptive equalization algorithm which is possible to improve the residual isi and robustness performance compare to the current MMA algorithm that is reduce the intersymbol interference occurs in channel when transmitting the QAM signal. The current MMA algorithm depend on the cost function and error function using fixed signal dispersion constant, but the M-CMA algorithm depend on the new proposed cost function and error function using multiple dispersion constant. By this, it is possible to having robustness of the CMA and simultaneous compensation of amplitude and phase of MMA. The computer simulation was performed in the same channel and noise environment for compare the proposed M-CMA and current MMA algorithm. The equalizer output signal constellation, residual isi, MD, MSE learning courves and SER, represents the robustness were used for performance index. As a result of simulation, the M-CMA has more superior to the MMA in robustness and other performance index.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2022

Purpose : Kinesio taping applied to the ankle varies, and if the overall ankle is taped as much as possible, several effects, including balance, can be expected, but clinically the cost reduction for intervention is very important. Therefore, this study attempted to find out the optimal way to the effect and cost of kinesio taping on ankle dynamic balance. Methods : The subject of this study was 24 university students in their 20s (male: 13, female: 11), who received sufficient explanation of the purpose and method of the study. The Cumberland ankle instability tool (CAIT) questionnaire was used for the degree of ankle instability of the study subjects. If the subject's CAIT score was 28 points or more, it was classified as a stable ankle, and if the score was 24 points or less, it was classified as functional ankle instability (FAI). In this study, Biodex Balance System^® measurement equipment was used to calculate the dynamic balance of study participants. The application of kinesio taping was performed by one physical therapist to attach in the same way, and a method of wrapping the ankle joint was applied in the eight-shaped bandage. Results : The results are as follows in before and after taping of the stable ankle and FAI group. There was no significant difference in the overall, anterior-posterior, and medial-lateral stability index. The comparison is as follows between groups for the differences (post-pre value) in before and after the application of kinesio taping. There were no significant differences between groups in all the overall, anterior-posterior, and medial-lateral stability index. Conclusion : In this study, no significant difference in kinesio taping was found in the dynamic balance of stable ankle and FAI (overall, anterior-posterior, and medial-lateral). It is necessary to continue to study ways to find the maximum effect while minimally attaching them to the application method of ankle kinesio taping.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.217-227
• /
• 2015

This study conducted case studies in order to suggest the improvement of GDP (Gross Domestic Product) deflator method which is adopted on calculating fluctuation rate on BTL (Build-Transfer-Lease) sewer rehabilitation projects in Jeju. As a result, because GDP deflator method calculates fluctuation rate by each quarterly, the fluctuation rate of GDP deflator method is higher than it of index adjustment rate method. And GDP deflator method cannot reflect real price because of applying fixed index in whole construction cost for calculating fluctuation rate. Especially, the notification day - the base point influences fluctuation rate and fluctuation amount strongly in GDP deflator method.