• Transactions on Electrical and Electronic Materials
• /
• 제9권5호
• /
• pp.193-197
• /
• 2008

On the purpose of increasing resonant frequency without sacrificing quality factor as well as much decreasing dimensions, corrugated micro beam resonator based on polycrystalline 3C-SiC films is the applicable solution. In this work, appropriate corrugated structure is suggested to increase resonant frequency of resonators. Micro beam resonators based on 3C-SiC films which have a two-side corrugation along the length of beams were simulated by finite element method and compared to a same-size flat rectangular. With the dimension of 36x12x0.5 ${\mu}m^{3}$, the flat cantilever has resonant frequency of 746 kHz. Meanwhile, with this size but corrugation width of 6 ${\mu}m$ and depth of 0.4 ${\mu}m$, the corrugated cantilever reaches the resonant frequency at 1.252 MHz.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1573-1574
• /
• 2011

• 대한기계학회논문집B
• /
• 제34권11호
• /
• pp.965-973
• /
• 2010

본 연구에서는 입구영향과 주름높이가 고려된 판형열교환기의 유동 및 열전달특성을 수치적으로 해석하였다. 여러 개의 단위셀을 연결한 다중셀에 입구부와 출구부가 부착된 모델을 기본으로 입구부의 길이변화($L_{cell}{\sim}5L_{cell}$)에 따른 모델과 P/H비 변화($2{\leq}P/H{\leq}4$)에 따른 모델에 대하여 수치해석을 수행하였다. 수치조건은 쉐브론각 $15^{\circ}$, 주름피치 24mm이며, $1,000{\leq}Re{\leq}10,000$이다. 마찰인자는f=$CRe^m$의 형태로, Colburn j 계수는 j=$CRe^m$의 형태로 상관관계식을 제시하였다. 이러한 상관관계식은 향후 판형열교환기 설계시에 기초자료로 활용될 수 있을 것으로 판단된다.

• 한국전자파학회논문지
• /
• 제11권3호
• /
• pp.388-402
• /
• 2000

주기적인 구형격자를 갖는 유전체 코팅된 도체 실린더에 대해 무한 주기 구조와 유한 주기 구조에 대한 누설 파 안테나의 복사 특성을 이론적으로 해석하였다. 무한 주기 구조에 대하여는 모드 정합 법을 적용하여 해석하 였고, 유한 주기 구조에 대하여는 퓨리에 변환과 모드 전개를 사용하여 적분 방정식을 유도하고 선형 연립 방정 식을 얻는다. 구형격자의 폭, 깊이, 유전체 코팅두께, 도체 실린더의 반경, 유한 구형격자 개수의 영향이 위상 상 수, 누설 상수 및 복사패턴 등과 복사 특성에 미치는 영향을 조사하였고, 유한 주기 구조와 무한 주기 구조의 결 과를 비교하고 잘 일치함을 확인할 수 있었다. 균일 유한 주기 구형격자에 의한 높은 측엽을 줄이기 위해 안테나 의 전후단 부에 테이퍼링과 비균일 준주기 슬롯배열을 고려하였다. 또한 구형격자 표면파 안테나에 사용되는 구 형격자 주기. 폭, 깊이에 대해 테이퍼링을 통해 낮은 측엽을 갖는 endfire 복사패턴을 얻을 수 있었다.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.3051-3059
• /
• 2015

본 연구에서는 가습소자 개발을 목적으로 절곡형상이 전열판의 성능에 미치는 영향을 수치해석적으로 검토하였다. 수치해석은 절곡각을 변화시키며 ($0^{\circ}/0^{\circ}$에서 $60^{\circ}/60^{\circ}$사이의 등각도와 $15^{\circ}/0^{\circ}$에서 $15^{\circ}/60^{\circ}$사이의 엇각도) 수행되었다. 해석 결과 j와 f 인자 모두 절곡각이 증가할수록 증가하였다. 특히 f 인자는 절곡각이 큰 영역에서 급격히 증가하였다. 엇각도 전열판의 j, f 인자와 두 각을 평균내어 구한 등각도 전열판의 j, f 인자는 거의 같은 값을 나타내었다. 한편 동일 소비동력 대비 열전달량을 나타내는 $j/f^{1/3}$의 경우 $15^{\circ}/15^{\circ}$에서 가장 크게 나타났다. 기존 상관식은 본 수치해석 결과를 과대 또는 과소예측하였다.

• Steel and Composite Structures
• /
• 제19권2호
• /
• pp.277-292
• /
• 2015

Previous research has shown that steel plate shear walls (SPSWs) are efficient lateral force-resisting systems against both wind and seismic loads. A properly designed SPSW can have high initial stiffness, strength, and energy absorption capacity as well as superior ductility. SPSWs have been commonly designed with unstiffened and stiffened infill plates based on economical and performance considerations. Recent introduction and application of corrugated plates with advantageous structural features has motivated the researchers to consider the employment of such elements in stiffened SPSWs with the aim of lowering the high construction cost of such high-performing systems. On this basis, this paper presents results from a numerical investigation of the hysteretic performance of SPSWs with trapezoidally corrugated infill plates. Finite element cyclic analyses are conducted on a series of flat- and corrugated-web SPSWs to examine the effects of web-plate thickness, corrugation angle, and number of corrugation half-waves on the hysteretic performance of such structural systems. Results of the parametric studies are indicative of effectiveness of increasing of the three aforementioned web-plate geometrical and corrugation parameters in improving the cyclic response and energy absorption capacity of SPSWs with trapezoidally corrugated infill plates. Increasing of the web-plate thickness and number of corrugation half-waves are found to be the most and the least effective in adjusting the hysteretic performance of such promising lateral force-resisting systems, respectively. Findings of this study also show that optimal selection of the web-plate thickness, corrugation angle, and number of corrugation half-waves along with proper design of the boundary frame members can result in high stiffness, strength, and cyclic performances of such corrugated-web SPSWs.

• 한국철도학회논문집
• /
• 제19권4호
• /
• pp.489-497
• /
• 2016

레일체결장치는 레일을 침목 등에 결속시켜 정해진 궤간의 유지와 열차 하중을 하부의 침목 및 도상 등에 전달하는 역할을 수행하는 주요 궤도 구성품이다. 본 논문에서는 도시철도 운영환경에서 파상마모에 대한 레일체결장치 클립의 진동 특성 분석을 위해서 조립상태에서 레일체결장치 클립의 모달테스트를 수행하여 고유진동수를 측정하였으며, 이를 파상마모에 의한 통과주파수와의 비교를 통해 공진 영향을 검토하였다. 또한 열차 주행시 파상마모에 따른 레일 및 레일체결장치 클립의 가속도와 레일체결장치 클립의 변형률을 계측하였다. 분석결과 레일 및 레일체결장치 클립의 가속도는 파상마모와 매우 밀접한 관계를 가지고 있으나, 레일체결장치 클립의 변형률과의 관계는 미비한 것으로 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 추계학술대회논문집; 한국종합전시장, 24 Nov. 1995
• /
• pp.197-200
• /
• 1995

Corrugation of railway track can be caused by the various dynamic behavior of travelling wheels and track. In this paper, the coupled vibrations of travelling wheel and railway track are analyzed as the cause of corrugations. To analyze the coupled vibrations, the track supported by the sleepers and the traveling wheel are identified to the elastically supported infinite beam and the spring-mass system which runs at constant speed. The Hertzian contact spring is considered betwen the infinite beam and spring-mass system. The dynamic responses of elastically supported infinite beam and spring-mass system are calculated. The cause and development of rail corrugation are discussed in the view point of contact force fluctuation affected by the elastic supports and the corrugated surface profile of the track. By the obtained results, the possibilities of resonance are checked between the excitation by the corrugated surface profile and the natural frequency of contact spring-moving mass system. It may be thought to a development of railway corrugation.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권2호
• /
• pp.19-24
• /
• 2023

Recently, interest in renewable energy such as solar and wind power has increased as an alternative to fossil fuels. Renewable energy sources such as large wind farms require long-distance power transmission because they are located inland or offshore, far from the city where power is required. High-Temperature Superconducting (HTS) power cables have more than 5 times the transmission capacity and less than one-tenth the transmission loss compared to the existing cables of the same size, enabling large-capacity transmission at low voltage. For commercialization of HTS power cables, unmanned operation and long-distance cooling technology of several kilometers is essential, and pressure drop characteristic is important. The cryostat's spiral corrugation tube is easier to bend, but unlike the round tube, the pressure drop cannot be calculated using the Moody chart. In addition, it is more difficult to predict the pressure drop characteristics due to the irregular surface roughness of the binder wound around the cable core. In this paper, a CFD model of a spiral corrugation tube with a core was designed by referring to the water experiments from previous studies. In the four cases geometry, when the surface roughness of the core was 10mm, most errors were 15% and the maximum errors were 23%. These results will be used as a reference for the design of long-distance HTS power cables.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2701-2706
• /
• 2003

This paper describes weld seam tracking and error compensation methods of automatic plasma arc welding system designed for the corrugation panel that consists of a linear section and a curved section with various curvatures. Realizing automatic welding system, we are faced with two problems. One is a precise seam tracking and the other is an arc length control. Due to the complexity of the panel shape, it is difficult to find a seam and operate a torch manually in the welding process. So, laser vision sensor for seam tracking is equipped for sensing the seam position and controlling the height of a torch automatically. To attain more precise measurement of an arc length, we measure the 3D shape of the panel and analyze error factors according to the various panel states and caused errors are predicted through the welding process. Using that result, compensation algorithm is added to that of arc length control and real time error compensation is achieved. The result shows that these two methods work effectively.