• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.52-59
• /
• 2014

In general, sulfur containing odorants are added to fuel gases, such as LPG, and city gas, to prevent gas poisoning, ignition, explosion, or other accident caused by fuel gases, and to enable immediate and easy detection of fuel-gas leakage by emitting an offensive smell. In this study, sulfur free odorant for low sulfur fuel and prevention of metal corrosion were developed to replace current sulfur containing odorant for gas fuel. They were selected from 12 odorant containing non-sulfur organic compounds and evaluated by odor olfactory method (odor quality, odor intensity). Finally, selected mixture odorants were methyl isovalerate, methyl acrylate, 2-ethyl-3-methyl pyrazine with blending ratio of 50% : 40% : 10%. Final Sulfur free odorant was added 40 wt ppm in LPG fuels and evaluated fuel quality characteristics, metal corrosion test and long term stability of LPG fuel. It were limit in current LPG fuel standard in fuel quality characteristics. Final Sulfur free odorant also had no influence on metal corrosion and long term stability test with 60 days by adding in LPG fuels. Finally, they were shown to be warning agent candidates to reduce sulfur content and metal corrosion for LPG fuel.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.83-85
• /
• 1996

Major cause of defects in steam generator tubes at nuclear power plant is the accumulation of magnetite and other byproducts of corrosion in the crevice gap between support plates and tubes. Since damaged tubes result in contamination of the secondary coolant by the radioactive primary coolant, they represent a safety hazard. Early detection of magnetite buildup is, therefore, imperative in order to take remedial measures such as chemical flushing. Although the eddy current testing is being used for the inspection of steam generator tubes, the interpretation of resulting signals is generally a difficult task. This paper uses the phase of sensor coil emf as the test signal to find a way of easier signal interpretation. Numerical study using FEM shows that the shape of resulting signal is good for identifying the relative position of the probe to the support plate, and for discreminating the different shapes and degrees of magnetite buildup in the crevice gap region.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.11
• /
• pp.2786-2795
• /
• 2000

Recently, the technology for internal polishing is needed for ultra-clean machining for the prevention of corrosion and pollution of parts is the area of high technology industries such as semiconductor, electronics, telecommunication optics, aerospace, and motors. In this study, an internal polishing system using the magnetic force was developed for the production of ultra-clean tubes with averaged surface roughness ranging from 0.2㎛ to 0.05㎛ or less, and magnetic abrasives composed of WC/Co powder were developed, After finding the optimal condition on each, machining characteristics using newly developed abrasive were analyzed. Form the results obtained by experimental design method, the optimal polishing condition was analyzed and, thhereafter internal polishing was done.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.244-249
• /
• 2008

It happened a failure on special bolt which supported main landing gear actuator up-lock rod of 00 aircraft. Fracture was occurred at end of center drilled hole and thread machined on bolt. Metallographic, fractographic, and other characteristics of embrittlement analysis and experiments carried out on the failed bolt to find out the reason. Bolt surface was cadmium electroplated(EP) to give lubrication and provide excellent corrosion resistance. Resultly, Bolt was failed due to cadmium embrittlement occurred during baking treatment as well as center drilled hole. for the failure that are relevant to failure analysis and prevention. For their successful functional application, cadmium EP bolts require proper and adequate baking treatment after electroplating, and is complete with no center drilled hole

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.3
• /
• pp.341-350
• /
• 2012

In this paper we observe the protective coatings carbon for steel, aluminium and titanium alloys were obtained by plasma electrolytic oxidation (PEO) under unipolar and bipolar conditions. The anticorrosion properties and the thermal stability of the surface layers were studied by electrochemical impedance spectroscopy and potentiodynamic polarization. It was found that the application of the bipolar PEO mode enables one to synthesize the surface layers that possess enhanced anticorrosion and mechanical properties. results of research of antiscale PEO - coatings for marine power equipment are presented. The combined method of prevention of corrosion and scale formation was tested at the industrial plants of Russian Shipyard "Zvezda".

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.8 no.2
• /
• pp.33-41
• /
• 2012

The component cooling water heat exchangers are critical components in a nuclear power plant. As the operation years of the heat exchanger go by, the maintenance costs required for continuous operation also increase. Most heat exchangers have carbon steel shells, tube support plates and flow baffles. The titanium tube is susceptible to flow induced vibration. The damage on carbon steel tube support rod and titanium tube around cooling water entrance area is inevitable. Therefore, analysis of internal flow around the component cooling water entrance and tube channel is a good opportunity to seek for failure prevention practice and maintenance method. The numerical study was carried out by FLUENT code to find out the causes of tube failure and its location.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.30-31
• /
• 2017

The objective of this study is to evaluate the performance of polymer-modified surface preparation mortars with pozzolanic materials for corrosion prevention method in deteriorated sewage treatment structures. The prepackaged-type surface preparation mortars are prepared with a polymer-binder ratio of 10%, ground granulated blast furnace slag contents of 0, 15, 30%, a fly ash content of 15%. And, the specimens are tested for workability, adhesion in tension, water absorption, crack and impact resistance. As a result, the prepackage-type surface preparation mortars for sewage treatment structure are satisfied with quality requirements by KS F 4716, Japan sewage work agency(JS) and JIS A 6916 for surface preparation mortars.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.52-57
• /
• 1998

The effects of additives such as zinc compounds in 4M KOH electrolyte of Al-air cell have been studied. Zinc compounds in electrolyte increased hydrogen evolution overpotential and TPC(tripotasium citrate)/CaO formed fine film on aluminum surface, and these additives decreased hydrogen evolution rate and corrosion rate of aluminum. These additives shifted the OCP in the positive direction on high purity aluminum(purity, 99.999%) and in the negative direction on Al No 1050(purity,99.5%). Addition of two or more additives resulted in the prevention or the reduction of corrosion rate and hydrogen evolution at OCP. As the overpotential on Al electrode increased, the hydrogen evolution rate decreased and the utilization of aluminum increased. At high current density$(>100mA/cm^2)$, TPC/CaO/ZnO additives increased the utilization of high purity aluminum up to that of aluminum alloys containing indium, gallium and thallium.

• Plant Journal
• /
• v.10 no.4
• /
• pp.35-41
• /
• 2014

The height and capacity of the thermal storage tank can be decided by the altitude and heat load of the heat supply area. Evaporation in heat pipe can be prevented by pressurizing it with the hydraulic head of the thermal storage tank. In addition, it absorbs the expanded volume from the temperature changes and supplies water to the pipelines in case of the shortage of water. One of the most important roles of the thermal storage tank is a stable heat supply facility. It can control the heat demand by accumulating the surplus heat and supplying in changing heat demand time. The purpose of this thesis is to be helpful for the operation and maintenance of the thermal storage tanks. The study has been carried out for 18 thermal storage tanks, which have been used polyurethane foam as insulation, among 27 tanks in district heating plants. The characteristics of the insulation materials, the reasons for the damages of the insulation and how impact the insulation damages to the corrosion of the thermal storage tank have been studied.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.108-113
• /
• 2006

For the past scores of years, our country has driven its land development toward economic growth as its top priority. ut, as a result that almost all developments been promoted excepting environmental values, in fact, they've incurred some bad environmental effects desirable. Especially, as representative examples, we can raise some issues such as damages of the foreshore or coast wet lands by seas reclamation, and coast corrosion by building up of rivers or coast constructions. Recently, many people started to have great interests in businesses of environment preservation or recycling to minimize effects of these environmental matters. However, before beginning public businesses of non-commercial goods relevant to the seas environments, there seemed to be some limitations that can not accomplish under consideration of environmental sides at the same time while performing economic validities and efficiencies with environmental economic analysis, which is already effective in countries advanced in environment, it's a very meaningful course in that citizens' opinions are being influenced in seas environmental policies for their efficient execution. In this research, after modeling coast corrosion preventives with Jeong-am coast of Gangwon Province, and using Contingent Valuation Method being widely used of value measuring methods on Non-commercial goods, we've appreciated environmental economy's validity of construction works and the scale of environmental economic value of beach restoration work.