• 한국구조물진단유지관리공학회 논문집
• /
• 제12권3호
• /
• pp.110-118
• /
• 2008

FRP bar는 높은 인장강도와 경량의 재료로 철근부식문제를 해결할 수 있는 대안으로 대두되고 있다. 그러나 FRP와 콘크리트 모두 취성적인 재료로 철근콘크리트보다 낮은 연성을 갖게 되며, 갑작스러운 파괴를 유발할 수 있다. 따라서 본 연구에서는 FRP 보강근을 사용한 휨부재의 압축측을 나선형 보강근으로 구속하여 거동을 개선하고자 하였으며, 구조실험을 통하여 파괴모드의 개선 및 연성증가를 확인할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.769-774
• /
• 2000

The purpose of this study was to investigate the structural performance of reinforcement corrosion reinforced concrete beams strengthened with epoxy mortar system. Main test parameters are existence and the magnitude of the reinforcement corrosion and the reinforcing bar and the tensile reinforcement ratio of the specimens. eight beam specimens were tested to investigate the effectiveness of each test variables on maximum load capacity and failure mode. Test results showed that the ultimate moment of th specimens were higher tan the nominal moment and the flexural stiffness was increased about 2.5 times and the cracking moments occurred over 60% of the failure moment in comparison with same sized control beam. However, note that epoxy mortar may conduct member into brittle failure mode.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.252-253
• /
• 2019

Corrosion of rebars in reinforced concrete structures is a major factor that shortens the life of the structure. As corrosion progresses, the adhesion between the concrete tissues and the rebar decreases and the cracks in the concrete due to the expansion of the oxide intensify. Although it is necessary to measure corrosion behavior of rebars inside the concrete to measure degradation of structures due to rebar corrosion, no studies have been conducted to measure corrosion of rebars in In-situ state. In this study, corrosion of rebars in reinforced concrete specimens was attempted to be quantified using micro-computer tomography. Since corrosion of concrete takes several months per 10mm of cover, accelerated corrosion techniques were applied. Accelerated corrosion on the specimen was conducted by applying a 10 V magnetic field to the buried rebar and external electrodes with the specimen submerged in a 10% calcium chloride solution. The experiment found that within two weeks, more than 40% of rebar reduction occurred, and the cracks in the radial cracks occurred through the concrete structure, leading to the transfer of the oxide produced through the cracks to the surface of the specimen.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.396-401
• /
• 1995

Epoxy coated reinforcing steels (ECRs) were acquired from ten sources and coatings from each source were initially characterized in terms of defects, thickness, solvent extraction weight loss and hardness. Testing involved exposure in three aqueous solutions at elevated temperature (8$0^{\circ}C$) and in chloride-contaminated concrete slabs under outdoor exposure, It was found that the density and size of coating defects was the promary factor affecting ECR performance. The equivalent circuit analysis using electrochemical impedance spectroscopy (EIS) data indicated that the impedance response for well-performing ECR specimens showed no signs of active degradation at the interface although diffusional processes similar to those noted for poorly performing bars occurred here. Experimental results also indicated a relationship between corrosion behavior and bar source. Weight loss upon solvent extraction correlated with impedance reduction from hot water exposure. Coating defects during most of the tests, especially in high pH solutions containing chloride ions. ECRs with excessive coating defects, either initially present or ones which developed in service, performed poorly in every test category regardless of source. Forms of coating failure were extensive rusting at defects, blistering, wet adhesion loss, cathodic delamination, underfilm corrosion and coating cracks. These occurred sequentially or concurrently, depending on the condition of the ECR and nature of the environment

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.192-193
• /
• 2020

In reinforced concrete adhesion studies, the demolition of the specimen is inevitably involved, and the studies conducted are limited to the macro load-displacement analysis. In order to establish an elaborate model for concrete bonding reinforced rebars, it is necessary to observe the rebar bonding behavior in the in-situ state. In this study, specially manufactured reinforcing bars, micro-UTM and 𝝁-computer tomography (𝝁CT) are used to observe reinforcing bars in the in-situ state. As a result of the monotonic pullout test of the processed reinforcing bar, maximum bond stress were shown to be 16.7MPa, which is slightly higher than the existing 10 to 12 MPa, and then the empty space inside the specimen in which the pullout test was conducted using 𝝁CT was confirmed. Through additional research, the fracture phenomenon of concrete excluding voids will be studied.

• 분석과학
• /
• 제14권4호
• /
• pp.364-370
• /
• 2001

염분을 함유한 몰탈 환경하에서 기존의 시멘트 몰탈을 대체할 수 있는 석고계 세라믹 몰탈 내의 철근의 부식 현상을 자연전위법, EPMA 분석, 외관조사, 무게 손실정도, 용출 실험에 의해 고찰하였다. 부식 가속화 장치를 이용하여 단기간 내에 부식 현상을 예측하였으며, 관찰된 외관 모습과 무게 손실정도를 통하여 부식 유무를 판단할 수 있었고, 실제 공시체 시료의 용출 실험을 통해 pH의 영향보다는 부식 메카니즘에 ${SO_4}^{2-}$의 영향이 크다는 것을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.597-600
• /
• 1999

Recitly, the use of sea-sand is increasing in the construction due to the rapid reduction of river-sand. In that case, one of the major problem is that a sand salt in sea-sand induce the corrosion of embedded reinforcing bar in concrete. In addition, the deterioration of concrete quality arises a social problem in the durability of reinforced concrete. This research is aimed at providing the data for the control of design method of repair and rehabilitation in the reinforced concrete structure by means of the evaluation of structural performance due to corrosion.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.447-450
• /
• 2000

Recently, antiwashout underwater concrete has used for underwater structure such as high strength massive concrete structures. When, concrete is placed in seawater the quality and durability of concrete could be doubt to especcially because the amount of cement placed in the concrete can be diminished by flowing seawater. In this study, antiwashout underwater concrete mixed with mineral admixtures for improvement of properties was placed in air, water, and salt water. Half-cell potential and current density was of specimens which made under different conditions measured for estimating corrosion degree. The experimental results demostrate that corrosion resistantce in saltwater was little and mineral admixtures improved properties of concrete.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권2호
• /
• pp.147-154
• /
• 2005

부식면적에 기준으로 살펴보면, 염화물이온 함유량이 증가할수록, 재령이 증가할수록 부식면적이 증가하는 것으로 나타났다. 특히 염화물이온 함유량이 $3kg/m^3$에서 $7kg/m^3$로 증가할때, 재령일이 730일에서 1035일로 증가할때 부식면적 증가 기울기가 큰 것으로 나타났다. 방청 시험체에 비해 무방청 시험체에서 약 8~35배정도 많은 부식면적을 나타내어 방청제 도포에 의한 부식방지에 효과를 확인할 수 있었다. 염화물이온을 함유하지 않은 경우 피복두께 증가에 따른 철근의 부식제어효과를 나타내었으나 염화물 이온을 함유한 시험체에서는 염화물 역확산, 시험오차 등의 복합적인 문제로 피복두께와 부식의 일정한 경향을 볼 수 없었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1025-1030
• /
• 2000

Recently, surface-treatment agent was developed to restore performance of the deteriorated concrete and inhibiting corrosion of the reinforcing-bar. The performance of surface-treatment agent was verified and this agent has been broadly in America and European countries. However, this type agent has not been used broadly in Korea because performance of the agent isn't verify by a proper test method yet. In this study, we suggested our own test procedures and methods through extensive laboratory tests to verify the performance of concrete after applying the surface-treatment agent.