• Korean Journal of Plant Resources
• /
• v.27 no.2
• /
• pp.174-182
• /
• 2014

This study was carried out to investigated the effects of soil type and light condition on seedling quality of rare and endemic plants Orostachys iwarenge and Orostachys iwarenge for. magnus. The best seedling quality of O. iwarenge and O. iwarenge for. magnus seedling were shown in Klasmann soil at non-shading or LED (Red+Blue) condition, 50% shading or LED (Red+Blue) condition, respectively. Survival of O. iwarenge seedling was not influenced by the period of experiment but survival of O. iwarenge for. magnus seedling in sandy soil conditions decreased significantly. Results of correlation analysis of seedling quality and survival rate, indicated that O. iwarenge showed a correlation of 0.8 or more at plant height, leaf length and fresh weight. O. iwarenge for. magnus showed a correlation of 0.8 or more at plant height, leaf width and leaf length. Especially, seedling survival of O. iwarenge and O. iwarenge for. magnus showed a correlation of 0.8 or more at first seedling survival and second seedling survival. It was important to manage the early seedling stages of O. iwarenge and O. iwarenge for. magnus. Therefore, seedlings with plant height (over 2.5~4 cm) and root length (over 3~5 cm) were grown vigorously at 35 days after the seedling was transplanted in mid-April in Klasmann soil of 72 plug cell tray at LED (Red+Blue) conditions.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.4
• /
• pp.291-298
• /
• 2021

Purpose: The Pedisole is a newly developed shoe-mounted wearable assessment system for analyzing balance and gait. This study aimed to determine the reliability and validity of the parameters provided by the system for static balance and gait analysis of healthy adults. Methods: This study included 38 healthy adults (22.4±1.9 years) with no history of injury in the lower limbs. All participants were asked to perform balance and gait tasks for undertaking measurements. For analysis of balance, both the smart Pedisole and Pedoscan systems were concurrently used to analyze the path length of the center of pressure (COP) and the weight ratio of the left and right for 10 s. Gait was measured using the smart Pedisole and GaitRite walkway systems simultaneously. The participants walked at a self-selected preferred gait speed. The cadence, stance time, swing time, and step time were used to analyze gait characteristics. Using the paired t-test, the intra-class coefficient correlation (ICC) was calculated for reliability. The Spearman correlation was used to assess the validity of the measurements. In total, data for balance from 36 participants and the gait profiles of 37 participants were evaluated. Results: There were significant differences between the COP path lengths (p<.050) derived from the two systems, and a significant correlation was found for COP path length (r=.382~.523) for static balance. The ICC for COP path length and weight ratio was found to be greater than .687, indicating moderate agreement in balance parameters. The ICC of gait parameters was found to be greater than .697 except for stance time, and there was significant correlation (r=.678~.922) with the GaitRite system. Conclusion: The newly developed smart insole-type Pedisole system and the related application are useful, reliable, and valid tools for balance and gait analysis compared to the gold standard Pedoscan and the GaitRite systems in healthy individuals.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.1
• /
• pp.67-75
• /
• 2022

Roots play important roles in water and nutrient uptake and in response to various environmental stresses. Investigating diversification of cultivars through root phenotyping is important for crop improvement in adzuki beans. Therefore, we analyzed the morphological and architectural root traits of 22 adzuki bean cultivars using 2-dimensional (2D) root imaging. Plants were grown in plastic tubes [6 cm (diameter) × 40 cm (height)] in a greenhouse from July 25^th to August 28^th. When the plants reached the 2^nd or 3^rd trifoliate leaf stage, the roots were removed and washed with tap water to remove soil particles. Clean root samples were scanned, and the scanned images were analyzed using the WinRHIZO Pro software. The cultivars were analyzed based on six root phenotypes [total root length (TRL), surface area (SA), average diameter (AD), and number of tips (NT) were included as root morphological traits (RMT); and link average length (LAL) and link average diameter (LAD) were included as root architectural traits (RAT)]. According to the analysis of variance (ANOVA), a significant difference was observed between the cultivars for all root morphological traits. Distribution analysis demonstrated that all root traits except LAL followed a normally distributed curve. In the correlation test, the most important morphological trait, TRL, showed a strong positive correlation with SA (r = 0.97^***) and NT (r = 0.94^***). In comparison, between RMT and RAT, TRL showed a significantly negative correlation with LAL (r = -0.50^***); however, TRL did not show a correlation with LAD. Based on RMT and RAT, we identified the cultivars that ranked 5% from the top and bottom. In particular, the cultivar "IT 236657" showed the highest TRL, SA, and NT, while the cultivar "IT 236169" showed the lowest values for TRL, SA, and NT. In addition, the coefficient of variance for the six tested root traits ranged from (14.26-40%) which suggested statistical variability in root phenotypes among the 22 adzuki bean varieties. Thus, this study will help to select target root traits for the adzuki bean breeding program in the future, generating climate-resilient adzuki beans, especially for drought stress, and may be useful for developing biotic and abiotic stress-tolerant cultivars based on better root trait attributes.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.176-187
• /
• 2020

The purpose of this study is to evaluate validity, reliability and reproducibility of tooth width (TW), arch length (AL) and arch length discrepancy (ALD) measured on a digital model taken via 3-dimensional model scanner and intraoral scanner compared to a plaster model. A total of 30 patients aged 12 to 18 were eligible for the study. 3 types of models were acquired from each patient: a conventional plaster model (P), a model scanned digital model (MSD) taken via Freedom UHD^® and an intraoral scanned digital model (ISD) taken via CS3600^® in-vivo. The reliability of TW and AL in each group was evaluated using Pearson's correlation coefficient, while the reproducibility was evaluated with intraclass correlation coefficient. The validity of space analysis was assessed by paired t-test. As a result, all measurements of P, MSD and ISD groups showed favorable reliability and reproducibility. Most of measurements for space analysis in MSD group and TW in ISD group also presented high validity. AL and ALD presented statistically significant difference between P and ISD group. The validity of measurements of space analysis in ISD group was short in doubt to valid, but clinically acceptable. Both MSD and ISD are clinically acceptable to use for space analysis but clinician should be aware that errors can be found using a digital model.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2408-2413
• /
• 2007

Since the heat generation in a chip increases as the components are miniaturized and the computing speed becomes faster, suitable heat dissipation has become one of the primary limiting factors to ensure the reliable operation of the electronic devices. A pin-fin array could be used as an alterative cooling system of the electronic equipment. In this study, convective heat transfer through the pin-fin array is analyzed experimentally based on porous medium approach. The influence of the structure of the pin-fin array including the pin-fin spacing, the pin diameter and plate length on heat transfer characteristics is investigated and compared with the previous analytical results and existing correlation equations. Nowadays, electronic and mechanical devices become smaller and smaller. In this sense, the main purpose of this study is to decide the optimum pin-fin arrangement to get similar heat transfer performance when the length of the existing cooling system is reduced as a half.

• International Journal of Concrete Structures and Materials
• /
• v.4 no.1
• /
• pp.63-68
• /
• 2010

With the emergence of ultra-high strength of concrete, the compression lap splice has become an important area of interest. According to ACI 318-08, a compression splice can be longer than a tension splice when high-strength concrete is used. By reevaluating the test results of compression splices and performing regression analysis, a simplified design equation for splice length in compression was developed based on the basic form of design equations for development/splice lengths of deformed bars and hooks in tension. A simple linear relation between $l_s/d_b$ and $f_{sc}\sqrt{f'_c}$ was assumed, and yields good values for the correlation coefficient and the mean and the COV (coefficient of variation) of the ratios of tests to predictions of splice strengths in compression. By including the 5% fractile coefficient of 0.83, a design equation for splice length in compression was developed. The splice length calculated using the proposed equation has a reliability that is equivalent to other provisions for reinforcing bars.

• The korean journal of orthodontics
• /
• v.21 no.1 s.33
• /
• pp.185-195
• /
• 1991

This study was undertaken to grope the correlation of the maximal bite force and tooth-craniofacial structure. The maximal bite force of 76 adult male, aged 18-28 (mean aged: $23.4{\pm}2.2$) years, was estimated and cephalometric headplates were measured, tabulated and statistically analyzed. The results were as follows. 1. 59.61kg of bite force in first molar, 45.38kg in premolar and 17.10kg in central incisor were arranged. 2. The bite force was negatively correlated to genial angle, mandibular plane angle, the angle between occlusal plane and mandibular plane, the angle between palatal plane and mandibular plane, and positively correlated to posterior height of face, length of mandibular body, length of ramus, facial depth in craniofacial structure. 3. The group with strong bite force showed small genial angle, mandibular plane angle, the angle between occlusal plane and mandibular plane, the angle between palatal plane and mandibular plane, and long posterior height of face, length of mandibular body, length of ramus, facial depth. So they manifested the tendency to brachycephalic pattern, on the other hand, the group with weak bite force manifested the tendency to dolichocephalic pattern. 4. There is no correlationships between bite force and mesial inclination of premolar axis in this subject. 5. It is considered bite force have an effect upon craniofacial pattern, especially upon the lower face.

• Journal of Environmental Science International
• /
• v.11 no.9
• /
• pp.915-923
• /
• 2002

Recently, GIS(Geographic Information System) is used to extract various hydrological factors from DEM(Digital Elevation Model) in river basin. Therefore, this study aims at the determination of river fractal dimension using DEM. In this paper, the main-stream length in river basin was grid-analyzed for each scale(1/5,000, 1/25,000, 1/50,000) and each cell size(5m$\times$5m, l0m$\times$l0m, 20m$\times$20m, 30m$\times$30m, 40m$\times$40m, 50m$\times$50m, 60m$\times$60m, 70m$\times$70m, 80m$\times$80m, 90m$\times$90m, 100m$\times$l00m, 120m$\times$120m, 150m$\times$150m) using GIS. Also, fractal dimension was derived by analyzing correlation among main-stream lengths, scale, and cell size which were calculated here. The result of calculating fractal dimension for each cell size shows that the fractal dimension on the main-stream length is 1.028.

• ALGAE
• /
• v.22 no.2
• /
• pp.107-116
• /
• 2007

Annual growth segments of Ascophyllum nodosum (L.) Le Jolis (Fucales, Fucaceae) are denoted by air bladders that form each spring. By examining annual growth segments, it may be possible to infer information about the physical conditions during the growth period; however, it is uncertain whether the annual segments will expand in size after the initial growth. We examined A. nodosum segments from three populations in Nova Scotia, and statistically evaluated whether the annual growth (length, mass, and maximum diameter) of segments was independent of the age of the frond, whether the segments increased in size after the initial growth, and whether the segment lengths were correlated with mean water temperatures and mean air temperatures when the segments were formed. We found that the growth in length of A. nodosum is dependent on the age of the frond, but frond age explained less than 12 % of the overall variation in length. However, the mass and maximum diameter of segments were independent of the age of the frond. Differences occurred between the lengths of segments formed in different years, but there was no significant correlation with regional mean water or air temperatures. This study indicates that the length of A. nodosum segments may be an indicator of the annual physical characteristics of a site, but future studies are needed to identify which factors have the strongest influence on growth patterns.

• The Research Journal of the Costume Culture
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2005

The objective of this paper is to provide fundamental data to establish measuring system of clothing that is more accurate. For the objective, stature and ration of height items, stature and ratio of circumference item, stature and ratio of length item on the children are investigated to obtain the interrelation of each item. Data for the research are selected from 52 people of 6 years old on boys and 49 people of 6 years old on girls who dwell in Seoul. The results of the research are as follows. Because ratio of the body on the stature of children is different from ratio of the adult, the same method for the adult cloth is not appropriate when producing the cloth of the children. observing the interrelation of each measurement item, measurement system of the children cloth that is indicated by the stature and the breast circumference, the stature and the waist circumference is not reasonable. Because the value of correlation of back length and circumference item was, it is not suitable that the back length is graded by the breast circumference when producing the cloth of the children.