• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.5
• /
• pp.511-515
• /
• 2013

A Monte Carlo (MC) simulation study has been done in order to investigate the effects of line-edge-roughness (LER) induced by either 1P1E (single-patterning and single-etching) or 2P2E (double-patterning and double-etching) on fully-depleted silicon-on-insulator (FDSOI) tri-gate metal-oxide-semiconductor field-effect transistors (MOSFETs). Three parameters for characterizing the LER profile [i.e., root-mean square deviation (${\sigma}$), correlation length (${\zeta}$), and fractal dimension (D)] are extracted from the image-processed scanning electron microscopy (SEM) image for each photolithography method. It is experimentally verified that two parameters (i.e., ${\sigma}$ and D) are almost the same in each case, but the correlation length in the 2P2E case is longer than that in the 1P1E case. The 2P2E-LER-induced $V_TH$ variation in FDSOI tri-gate MOSFETs is smaller than the 1P1E-LER-induced $V_TH$ variation. The total random variation in $V_TH$, however, is very dependent on the other major random variation sources, such as random dopant fluctuation (RDF) and work-function variation (WFV).

• Korean Journal of Applied Biomechanics
• /
• v.28 no.3
• /
• pp.159-164
• /
• 2018

Objective: The aims of this study were to determine the impact peak force and kinematic variables in running speed and investigate the relationship between them. Method: Thirty-nine male heel strike runners ($mean\;age=21.7{\pm}1.6y$, $mean\;mass=72.5{\pm}8.7kg$, $mean\;height=176.6{\pm}6.1cm$) were recruited in this investigation. The impact peak forces during treadmill running were assessed, and the kinematic variables were computed using three-dimensional data collected using eight infrared cameras (Oqus 300, Qualisys, Sweden). One-way analysis of variance ANOVAwas used to investigate the influence of the running speed on the parameters, and Pearson's partial correlation was used to investigate the relationship between the impact peak force and kinematic variables. Results: The running speed affected the impact peak force, stride length, stride frequency, and kinematic variables during the stride phase and the foot angle at heel contact; however, it did not affect the ankle and knee joint angles in the sagittal plane at heel contact. No significant correlation was noted between the impact peak force and kinematic variables in constantrunning speed. Conclusion: Increasing ankle and knee joint angles at heel contact may not be related to the mechanism behind reducing the impact peak force during treadmill running at constant speed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.501-508
• /
• 2001

A graph or topographic map can often convey larger amounts of information in a shorter time than ordinary text-based methods. To visualize information precisely it is necessary to collect all the geological information at design stage, but actually it is almost impossible to bore or explore the entire area to gather the required data. So, tunnel engineers have to rely on the judgement of expert from the limited number of the results of exploration and experiment. In this study, several programs are developed to handle the results of geological investigation with various data processing techniques. The results of the typical case study are also presented. For the electric survey, eleven points are chosen at the valley to measure the resistivity using Schlumberger array. The measured data are interpolated in 3-dimensional space by kriging and the distribution of resistivity are visualized to find weak or fractured zone. The correlation length appears to be around 5 to 20 meter in depth. Regression analyses were performed to find a correlation length. No nugget effect is assumed, and the topographic map, geologic formation, fault zone, joint geometry and the distribution of resistivity are successfully visualized by using the proposed technique.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.86-91
• /
• 2004

It is very important to detect the bearing defects in rotating machinery since the critical failure of bearing cause a machinery shutdown. However it is difficult to detect the vibration signal resulting from the initial defects of bearing because of the high level of broadband noise. A signal processing technique, called the adaptive line enhancer(ALE) as one of adaptive filter, is studied in this work. This technique is to eliminate broadband noise without a prior knowledge of the noise and signal characteristics. Also we propose the optimal methods for selecting the three main ALE parameters such as correlation length, filter order and adaptation constant used in the adaptative process. Vibration signals for three abnormal bearings, including inner and outer raceways and ball defects, were acquired from Anderon(angular derivative of radius on)meter. The experimental results showed that the proposed technique can reliably detect the bearing defective signals masked by broadband noise.

• KCID journal
• /
• v.19 no.1
• /
• pp.19-29
• /
• 2012

The data of the agricultural water quality survey network was analyzed between from 1990 to 2010 in order to propose effective plans for water quality management by analyzing the characteristics of agricultural lakes and the change of water quality. The result of the analysis shows that there is a correlation between water quality and items that can be a function of water depth such as dam height, dam length, dam height/dam length ratio and active storage/surface area of lake ratio. This means that, Korean agricultural lakes, there is a correlation between water quality and water depth. Water quality of the lakes that have lower than 5m of active storage/surface area of lake ratio (effective water depth) especially tends to get worse rapidly. The Chl-a and COD concentration of Korean agricultural lakes have a tendency to increase between June and September. Therefore, we recommend first taking a water quality improvement project for the lakes preformed watershed management project, and taking a preventive short-term water quality improvement project for the unperformed lakes before June among lakes that have lower than 5m of effective water depth.

• Journal of the Korean Society of Costume
• /
• v.51 no.1
• /
• pp.87-96
• /
• 2001

This study, dealing with obese bodily figures from the viewpoint of garment shape, was conducted with obese male children of late school ages(nine to eleven years old) to provide data for making ready-made clothing for obese children by directly measuring and analysing the bodily figure of the upper body of them. The results of the study are summarized as follows. 1. According to the basic statistics, for most of obese children the values of the measuring items by ages appeared to be large, and the results of comparison with the National Anthropometric Survey of Korea made in 1997 showed that the values were more large than those of standard physical conditions. 2. It was shown that in the correlation between items the upper breast circumference had a high correlation with all items, and the weight did with the following items such as circumference, height, width and thickness. 3. The results of the principal component analysis showed that six main components hand an explainable power of more than 75.60% for all materials. The first factor was thickness and obesity of the upper body, the second one the height, the third one the length of front and rear sides, the fourth one the width of neck, the fifth one the length of shoulder, and the sixth one the breast width and the wrist circumference.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2C
• /
• pp.100-109
• /
• 2003

A differential index assignment scheme is proposed for the image encoding system in which a variable-length tree-structured vector quantizer is adopted. Each source vector is quantized into a terminal node of VLTSVQ and each terminal node is represented as a unique binary vector. The proposed index assignment scheme utilizes the correlation between interblocks of the image to increase the compression ratio with the image quality maintained. Simulation results show that the proposed scheme achieves a much higher compression ratio than the conventional one does and that the amount of the bit rate reduction of the proposed scheme becomes large as the correlation of the image becomes large. The proposed encoding scheme can be effectively used to encode R images whose pixel values we, in general, highly correlated with those of the neighbor pixels.

• Journal of Communications and Networks
• /
• v.14 no.3
• /
• pp.230-236
• /
• 2012

Based on the known binary sequence sets and Gray mapping, a new method for constructing quaternary sequence sets is presented and the resulting sequence sets' properties are investigated. As three direct applications of the proposed method, when we choose the binary aperiodic, periodic, and Z-complementary sequence sets as the known binary sequence sets, the resultant quaternary sequence sets are the quaternary aperiodic, periodic, and Z-complementary sequence sets, respectively. In comparison with themethod proposed by Jang et al., the new method can cope with either both the aperiodic and periodic cases or both even and odd lengths of sub-sequences, whereas the former is only fit for the periodic case with even length of sub-sequences. As a consequence, by both our and Jang et al.'s methods, an arbitrary binary aperiodic, periodic, or Z-complementary sequence set can be transformed into a quaternary one no matter its length of sub-sequences is odd or even. Finally, a table on the existing quaternary periodic complementary sequence sets is given as well.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.6
• /
• pp.401-409
• /
• 2016

The formation of micro-burrs in micro-milling processes causes several problems related to productivity and surface integrity. It should be minimized and suppressed by effective monitoring of the cutting conditions. This paper presents the correlation between the micro-burr length and cutting signals in the micro-milling process of an Al alloy (Al6061-T6). The acoustic emission (AE) signals and cutting force signals are acquired during the experiments. The characteristics of the cutting signals are obtained by analyzing the AE root mean square value and resultant cutting force. In addition, the micro-burr length is measured according to the cutting conditions by analyzing a scanning electron microscopy image of the machined surface. The results of this study can be used to enhance the surface quality of micro parts.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.8
• /
• pp.462-468
• /
• 2005

In this paper, we present a frame synchronization scheme for high oversampling rate based QPSK receiver system in the underwater acoustic burst transmission. The proposed frame synchronization scheme determines the frame synchronization by comparing a threshold value with the correlation between the received symbol sequence and rotated 16-symbol length CAZAC sequence, which is made by dividing into two 8-symbol length sequences and then concatenating the latter sequence and the former one. If the correlation value is bigger than the threshold value, the frame detector determines that the frame synchronization is achieved at that sample. Also, the approximated performance of designed frame detector is derived and it is well fit the simulated result.