• Journal of Environmental Health Sciences
• /
• v.34 no.3
• /
• pp.255-260
• /
• 2008

This study was conducted to analyse the effects of the UFCA for treating polluted water in a reservoir. The UFCA mixes water by circulation of surface and bottom water layers. The circulation supplies oxygen to bottom of the reservoir, resulting in water quality improvement. With a UFCA in use, we surveyed the changes of temperature, pH, transparency, depth, conductivity, DO, COD, BOD, T-N, T-P and Chlorophyll-a for 7 months from Feb. to Aug. in 2004 in our experimental reservoir. There was little difference in the surface and bottom temperatures of the reservoir because of water mixing by the UFCA. However, pH was changed from 7 to 9. The transparency of water was about 80 cm through the all periods. Conductivity was $150\;{\mu}S/cm$ in early Feb., but increased to $270\;{\mu}S/cm$ in early March. Little change was seen in DO with depth, but it was maintained above 6 mg/l in June and July. BOD increased from 2.1 to 12.2 mg/l. The study reservoir did not undergo any eutrophication during the period of our experiment, but the comparison reservoir had an algae-bloom. The COD in the experimental reservoir increased from 5.4 to 14.5 mg/l. The COD concentration of the experimental reservoir was higher than comparison reservoir at the beginning of the study but in August this situation was reversed. SS concentration increased from 13.5 to 23.5 mg/l in Feb., but it fell from between 8.5 to 11.2 mg/l in July. T-N was increased from 1.3 to 4.9 mg/l. It increased up to 3 times in the rainy season as compared to other components. However the comparison reservoir increased up to 40 times higher than the experimental reservoir in the same period. T-P increased from 0.04 to 0.17 mg/l. The ratio of T-N to T-P increased from 20:1 to 40:1 which means that T-P was a growth limiting factor for algae and aquatic plants. Chlorophyll-a increased from 20 to 120 mg/l, and its concentration was correlated with T-P, such that Chlorophyl-a concentration increased with increased of T-P concentration. The concentrations of COD, T-N, T-P and other parameters were higher in the experimental reservoir than in the comparison reservoir but this situation was reversed in July, when the most severe eutophication occurred. The results show that overall the experimental reservoir was greatly remedied by UFCA. The UFCA accelerated the degradation of aquatic organic materials through effective supply of air with up-flow and circulation of water. We conclude that the UFCA can be very effective in aspect of the remediation of water quality incontaminated reservoirs and lakes.

• Korean Journal of Agricultural Science
• /
• v.28 no.1
• /
• pp.33-40
• /
• 2001

The authors attempted to derive a comprehensive quantitative structure-toxicity relationships (QSTRs) between various physicochemical parameters of phenyl substituents in fungicidal phenylthionocarbamate derivatives and toxicity evaluated using TOPKAT calculation. On the basis of this approach we made preditions for toxicity values for not yet tested substances with respect to these systems. The results suggested that the optimal values, $(B_2)_{opt.}=1.54_{\AA}$(Ames mutagenicity), $(R)_{opt.}=0.16$ (car-cinogenicity of male rat), $(\pi)_{opt.)=0.16$ (carcinogenicity of male mouse), $({\varepsilon}LOMO)_{opt}=-0.52e.v.$ ($LD_{50}$ of rat oral), $(B_3){opt.}=1.54_{\AA}$(chronic LOAEU), $(logP)_{opt.}=4.25$ ($LC_{50}$ of Fathead minnow) and $({\sigma})_{opt}=-0.68$ ($EC_{50}$ of Daphnia magna) of phenyl substituents were strongly correlated with the acute and chronic toxicities.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1993.05a
• /
• pp.69-69
• /
• 1993

The fundamental vocal frequency is produced by simple vibration of the whol length of the vocal folds and is one of the most important single parameters in determining the eventual characteristics of the voice. Authors measured the external laryngeal size, fundamental frequency in 3rd decades adults and about 10-year old children for use them as the base of diagnosis and treatment of laryngeal disease. Results were as follows: 1 In adults, mean external laryngeal size was 37.8$\pm$3.15 mm in male and 31.0$\pm$3.19 mm in female, and the mean fundamental frequency were 117.8$\pm$ 10.09 Hz in male and 220.26$\pm$13.75 Hz in female. (p <0.05) 3. In children, mean external laryngeal size was 25.67$\pm$4.53 mm in male and 27.28$\pm$2.77 mm in female, and mean fundamental frequency were 225.88$\pm$15.89 Hz in male and 239.25$\pm$15.92 Hz in female. (P <0.01) 5. In adults, the external laryngeal size was correlated with fundamental frequency and it was statistically significant.(r=0.48)

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.3
• /
• pp.197-210
• /
• 2000

Surface roughness is one of implant surface topography and it's found that surface roughness characterizations, such as surface energy, oxide layer thickness and its chemical composition, are closely correlated if the roughness is changed. Several studies showed the importance of analyzing surface structure so the surface structure of thread implant was analyzed to measure the implant quality exactly. In this study, surface roughness of 4 implants - MK $II^{(R)}$(Nobel Biocare), $RBM^{(R)}$(Life-Core, USA), $Osseotite^{(R)}$(3i, USA), $TPS^{(R)}$(Life-Core, USA) - were measured using $Accura^{(R)}$ and 40 implants were installed into 4 sets of ten bovine ribs based on the parameters from the measurements. From this test, the following conclusions for the initial stability were drawn by measuring and comparing RFA, Periotest Value (PTV), Removal Torgue Value (RTV). 1. $R_a$ value in surface roughness measurement was increasing by the order of $MKII^{(R)}$, $Osseotite^{(R)}$, $RBM^{(R)}$, $TPS^{(R)}$ and $R_q$ value was the same order. 2. $R_q$ value in each section was observed to increase by the order of $MKII^{(R)}$, $Osseotite^{(R)}$, $RBM^{(R)}$, $TPS^{(R)}$ in top and $MKII^{(R)}$, $RBM^{(R)}$, $Osseotite^{(R)}$, $TPS^{(R)}$ in mid-section but the value of $MKII^{(R)}$ bottom was the lowest, followed by $Osseotite^{(R)}$, $RBM^{(R)}$ and $TPS^{(R)}$. 3. RFA increased by the order of $RBM^{(R)}$(7042Hz), $MKII^{(R)}$(7047Hz), $Osseotite^{(R)}$(7076Hz), $TPS^{(R)}$(7168Hz) and there was no significance between each group. 4. PTV was increasing by the order of $MKII^{(R)}$(-1.62), $TPS^{(R)}$(-1.92), $Osseotite^{(R)}$ & $RBM^{(R)}$(-2.08) and there was no significance, either. 5. Removal torque in RTV measurement showed the increasing order of $MKII^{(R)}(5.31kgf{\cdot}cm)$, $Oeeotite^{(R)}(5.71kgf{\cdot}cm)$, $TPS^{(R)}(5.92kgf{\cdot}cm)$ and $RBM^{(R)}(7.24kgf{\cdot}cm)$ and there was no significance among groups. Above observations explains that surface roughness does not make any impact on the initial stability of implants installation.

• The Korean Journal of Zoology
• /
• v.33 no.2
• /
• pp.183-190
• /
• 1990

The present study exarnines the physiological alteradons in prolactin (PRL) messenger ribonucleic acid (mRNA) and serum PRL levels during the rat estrous cycle and the effed of naloxone, an endogenous oploid peptide receptor antagonist, on PRL gene expression during the rat estrous cycle. Adult female rats exhibiting at least two consecutive 4-day estrous cycles were used in this study. A single injection of naloxone (2mg/kg b.w.) or saline was given sc 30 mm prior to decapitation. Animals were sacrificed at 10:00 h of each stage of the estrous cycle, and at 2-h intervals from 10:00 h to 20:00 h during the proestrus. PRL mRNA and serum PRL levels were determined by a RNA-blot hybridization with the rat PRL cDNA probe and by a PRL radjoimmunoassay, respectively. PRL mRNA and serum PRL levels were not dramatically altered in the morning of each stage of diestrus I, II and proestrus, and naloxone failed to modify the two parameters. During estrus naloxone clearly suppressed serum PRL levels, but it was unable to modify PRL mRNA levels. A more detailed examination of the proestrus stage revealed that PRL mRNA and serum PRL levels were fluctuated as a function of time: PRL mRNA levels reached a maximum level at 12:00 h and gradually decreased until 18:00 h. PRL mRNA levels then rose at 20:00 h. No difference of PRL mRNA levels between the control and naloxone-treated groups was observed. Changes in serum PRL levek during proestrus were conversely related to changes in PRL mRNA: serum PRL levels were low from 10:00 h to 14:00 h, then increased and reached a maximum level at 16:00-18:00 h. Following then, serum PRL levels were decreased. Naloxone was effective in suppressing the charaderistic afternoon surge of PRL from 16:00 h to 20:00 h. These data clearly showed that alterations in PRL mRNA levels were conversely correlated with changes mn serum PRL levels on proestrus, indicating a differential regulation of PRL gene expression and secretion.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.117-121
• /
• 1992

The changes in sensory and mechanical texture of chewing gum during storage at various relative humidity were studied to define the quality index for the prediction of shelf-life. The initial moisture content of chewing gum was 2.57% (dry basis). The BET monolayer value at $a_{w}$ 0.19 was calculated to be 1.57% (dry basis). The sensory scores of chewing gum were closely correlated with moisture content and instrumental texture parameters with 0.1% significant level. Therefore the quality of stored chewing gum was directly related with moisture content above BET monolayer. The products became organoleptically acceptable in the range of moisture content $2.17{\sim}3.16%(dry basis)$. This range of moisture content ie equivalent to the ranges of instrumental parameter, fracture force$0.8{\sim}1.8{\times}10^{7}$, fracture modulus $1.1{\sim}2.4{\times}10^{8}$, puncture force $0.5{\sim}1.1{\times}10^{7}[dyne/cm^{2}]$ and brittleness $0.7{\sim}1.4{\times}10^{8}[dyne/cm^{3}]$, respectively.

• Korean Journal of Psychosomatic Medicine
• /
• v.18 no.1
• /
• pp.30-39
• /
• 2010

Objectives：Assessment of sleep disturbance is an essential part of the diagnostic criteria used for several psychiatric disorders. Change in sleep patterns over time may indicate response to treatment. In clinical practice, sleep is usually evaluated subjectively by patient self-report. This study was aimed to compare subjective sleep assessment with objective sleep measurement by actigraphy in psychiatric inpatients. Methods：A total of 32 psychiatric inpatients were studied. Patients were asked to wear a wrist actigraphy for three consecutive days and nights and to fill out a sleep log each morning. The severity of depression and anxiety was evaluated according to Beck Depression Inventory and State-Trait Anxiety Inventory on the first day of the study. The subjective level of satisfaction with quality of sleep was also evaluated according to visual analog scale. Nurses assessed sleep at one hour interval between 10:00 PM and 6:00 AM for three consecutive nights. Results：There was statistically significant difference of sleep latency between patient's sleep log and acti-graphic measurement. Nursing reports were more consistent with actigraphic measurement than sleep log. Interestingly, subjectively poor sleepers show no significant difference in sleep parameters compared with those of good sleepers. Subjectively poor sleepers report longer sleep latency than that of actigraphic assessment. The discrepancy between subjective and objective assessment of sleep latency was significantly correlated with scores of Beck Depression Inventory and State-Trait Anxiety Inventory. Conclusion：These results show that there are discrepancies between subjective and objective assessment of sleep. The discrepancy of sleep assessment could be influenced by severe depression and anxiety. Especially objective sleep measurement is needed to assess sleep in psychiatric inpatients with severe depression or anxiety and the subjectively poor sleepers for more reliable measurements.

• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.421-437
• /
• 2002

In order to quantify the anisotropic properties of rock included joints and shear behavior in joint surface, the mold is Produced for rock joint surface using gypsum Plaster and Peformed for replicated joint models made of cement mortar. Rock sample is measured using mechanical profilometer before testing and their result is expressed quantitatively. The statistical parameters and the fractal dimension by fractal theory for roughness is investigated its coordinate value for numerical process. The shear strength to the shear displacement in low level normal stress ismaintained or increased in most joint models. Their results present that this relationship is depended several roughness properties in joint model for natural rock joint. The relationship between the shear strength and the Properties for profiles estimated by some statistical parameter in roughness has the low correlation and is not constant. The result between the data for direct shear test and using Barton's equation, Barton's equation has not the effectiveness for the effect of anisotropy and has not suitable to recognizing the properties for joint surface. It means that JRC has not the properties of anisotropic rock surface. The fractal dimension is well correlated with the data of direct shear test than those of JRC. New experimental formulae using fractal dimension is comported with the anisotropic properties for direct shear test.

• Economic and Environmental Geology
• /
• v.29 no.6
• /
• pp.713-724
• /
• 1996

The time-series resident solute concentrations, monitored at two field plots using the automated 144-channel TDR system by Kim (this issue), are used to investigate the dominant transport mechanism at field scale. Two models, based on contradictory assumptions for describing the solute transport in the vadose zone, are fitted to the measured mean breakthrough curves (BTCs): the deterministic one-dimensional convection-dispersion model (CDE) and the stochastic-convective lognormal transfer function model (CLT). In addition, moment analysis has been performed using the probability density functions (pdfs) of the travel time of resident concentration. Results of moment analysis have shown that the first and second time moments of resident pdf are larger than those of flux pdf. Based on the time moments, expressed in function of model parameters, variance and dispersion of resident solute travel times are derived. The relationship between variance or dispersion of solute travel time and depth has been found to be identical for both the time-series flux and resident concentrations. Based on these relationships, the two models have been tested. However, due to the significant variations of transport properties across depth, the test has led to unreliable results. Consequently, the model performance has been evaluated based on predictability of the time-series resident BTCs at other depths after calibration at the first depth. The evaluation of model predictability has resulted in a clear conclusion that for both experimental sites the CLT model gives more accurate prediction than the CDE model. This suggests that solute transport at natural field soils is more likely governed by a stream tube model concept with correlated flow than a complete mixing model. Poor prediction of CDE model is attributed to the underestimation of solute spreading and thus resulting in an overprediction of peak concentration.

• Resources Recycling
• /
• v.12 no.3
• /
• pp.13-24
• /
• 2003

The production characteristics of activated carbon from waste walnut shell have been investigated by taking activation temperature, activation time, amount of activating agent, and kind of activating agent as the major influential factors. The adsorption capacity of the activated carbon which was produced using phosphoric acid as the activating agent increased with activation temperature and showed its greatest value at about $550^{\circ}C$. Yield for activated carbon was observed to decrease continuously as the activation temperature was raised. The optimal activation time for the highest adsorption capacity was found to be about 2 hr, and as the activation time increased the yield for activated carbon was showed to decrease continuously. The increase in the amount of activating agent resulted in the increase of the yield for activated carbon, however, excessive amount of activating agent deteriorated its adsorption capacity reversely. The variations of the microstructure of activated carbon observed by SEM with several influential factors, correlated very well with its changes in the adsorbability with the same factors and the kind of activating agent was found to play an important role in the determination of the adsorption capacity of activated carbon. To investigate the adsorption characteristics of the produced activated carbon, the adsorption reactions of $Cu^{2+}$ ion were examined using the produced activated carbon as the adsorbent. In general, the kinetics of the adsorption of $Cu^{2+}$ ion was observed to follow a 2nd-order reaction and the rate constant for adsorption reaction increased as the initial concentration of adsorbate was diminished. The equilibrium adsorption of $Cu^{2+}$ was explained well with Freundlich model and its adsorption reaction was found to be endothermic. The activation energy for adsorption was calculated to be 13.07 kcal/mol, which implied that the adsorption reaction was very irreversible, and several thermodynamic parameters of adsorption reaction were estimated using van't. Hoff equation and thermodynamic relationships.