• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.181-184
• /
• 2006

Knowledge of the ionospheric peak parameter foF2 (the critical frequency of F2 layer) is one of key essential factors for predicting ionospheric characteristics and delay correction of satellite positioning. However, the foF2 was almost estimated using an empirical model of International Reference Ionosphere (IRI) or other expensive observing techniques, such as ionosondes and scatter radar. In this paper, the ionospheric peak parameter foF2 is the first observed by ground-based GPS with all weather, low-cost and near real time properties. Compared with the IRI-2001 and independent ionosondes at or near the GPS receiver stations, the foF2 obtained from ground-based GPS is in better agreement, but closer to the ionosonde. However, during nighttime, the IRI model overestimated the GPS observed values during winter and equinox months.Furthermore, seasonal variation trend of the foF2 in 2003 is studied using foF2 monthly median hourly data measured over South Korea. It has shown that the systematic diurnal changes of foF2 are apparent in each season and the higher values of foF2 are observed during the equinoxes (semiannual anomaly) as well as in mid-daytime of each season.

• Geomechanics and Engineering
• /
• 제22권5호
• /
• pp.415-431
• /
• 2020

In this study, dynamics responses of advanced composite plates resting variable elastic foundations via a quasi-3D theory are developed using an analytical approach. This higher shear deformation theory (HSDT) is included the shear deformation theory and effect stretching that has five unknowns, which is even inferior to normal deformation theories found literature and other theories. The quasi-three-dimensional (quasi-3D) theory accounts for a parabolic distribution of the transverse shear deformation and satisfies the zero traction boundary conditions on the surfaces of the advanced composite plate without needing shear correction factors. The plates assumed to be rest on two-parameter elastic foundations, the Winkler parameter is supposed to be constant but the Pasternak parameter varies along the long side of the plate with three distributions (linear, parabolic and sinusoidal). The material properties of the advanced composite plates gradually vary through the thickness according to two distribution models (power law and Mori-Tanaka). Governing differential equations and associated boundary conditions for dynamics responses of the advanced composite plates are derived using the Hamilton principle and are solved by using an analytical solution of Navier's technique. The present results and validations of our modal with literature are presented that permitted to demonstrate the accuracy of the present quasi-3D theory to predict the effect of variables elastic foundation on dynamics responses of advanced composite plates.

• Steel and Composite Structures
• /
• 제18권2호
• /
• pp.425-442
• /
• 2015

This paper addresses theoretically the bending and buckling behaviors of size-dependent nanobeams made of functionally graded materials (FGMs) including the thickness stretching effect. The size-dependent FGM nanobeam is investigated on the basis of the nonlocal continuum model. The nonlocal elastic behavior is described by the differential constitutive model of Eringen, which enables the present model to become effective in the analysis and design of nanostructures. The present model incorporates the length scale parameter (nonlocal parameter) which can capture the small scale effect, and furthermore accounts for both shear deformation and thickness stretching effects by virtue of a sinusoidal variation of all displacements through the thickness without using shear correction factor. The material properties of FGM nanobeams are assumed to vary through the thickness according to a power law. The governing equations and the related boundary conditions are derived using the principal of minimum total potential energy. A Navier-type solution is developed for simply-supported boundary conditions, and exact expressions are proposed for the deflections and the buckling load. The effects of nonlocal parameter, aspect ratio and various material compositions on the static and stability responses of the FGM nanobeam are discussed in detail. The study is relevant to nanotechnology deployment in for example aircraft structures.

• 핵의학기술
• /
• 제15권2호
• /
• pp.53-59
• /
• 2011

최근 PET/CT 검사는 성인 암환자뿐만 아니라 소아 암환자에게도 많이 적용하고 있다. 그러나 소아 환자의 경우 성인에 비하여 방사성 감수성이 높아 피폭선량의 관리를 필요로 하고 있다. 그러므로 본 저자는 팬텀을 이용하여 소아 PET/CT 검사 시 감쇄보정 CT 선량과 영상을 평가하였다. 3대의 PET/CT 장비 (Discovery STe, BiographTruepoint 40, Discovery 600)로 소아 사이즈의 아크릴 팬텀과 이온 챔버 선량계 (Unfous Xi CT, Sweden)를 이용하여 CT 영상획득 조건 (10, 20, 40, 80, 100, 160 mA; 80, 100, 120, 140 kVp)을 변화시켜 심부선량과 $CTDI_{vol}$ 값을 평가하였다. 그리고 NEMA PET Phantom$^{TM}$을 이용하여 같은 CT 조건으로 PET 영상을 획득하여 감쇄보정 된 각 PET 영상을 SUV 값과 신호 대 잡음 비로 평가하였다. 심부선량은 일반적으로 소아복부 CT 조건 (100 kVp, 100 mA) 보다 최소 CT 조건 (80 kVp, 10 mA)에서의 심부선량은 약 92% 감소 되었고, $CTDI_{vol}$ 값은 약 88% 감소되었다. 각 CT 조건에 따라 감쇄 보정된 PET 영상은 SUV 값에 변화가 없었고, 신호 대 잡음 비도 영향을 받지 않았다. 팬텀을 이용한 소아 PET/CT 실험시 최저 선량 CT 조건 (80 kVp, 10 mA) 을 적용하여 감쇄보정을 진행한 PET 영상에는 영향 없었다. 소아 환자의 PET/CT 검사 시 CT 의 진단이 필요 없는 PET 영상만을 획득하고자 한다면, 소아 환자의 신체에 적절히 적용한 최저선량 CT 을 감쇄보정을 하여, 유효 선량을 성인에 비하여 약 90% 이상 감소시켜 피폭 선량 저감에 도움이 될 것이다.

• 한국측량학회지
• /
• 제30권1호
• /
• pp.21-30
• /
• 2012

위성 카메라의 두 밴드가 다른 관측 각(Look angle)으로 촬영 시, 두 밴드간의 정합이 요구된다. 밴드 정합(Band registration)은 플랫폼의 다이나믹스(Dynamics)와 시차효과로 인하여 상수매개변수(constant parameter)로 수학적인 모델을 수립하여 정합(registration)을 수행하기 어렵다. 시차효과는 지표면 표고에 의해 야기되는 현상으로 이는 두 밴드간 정합 특성이 지표면의 표고의 함수로 주어진다. 두 밴드간 정합이 성공적으로 이뤄지기 위하여 시차효과를 보상하는 표고시차보상기법이 요구된다. 이러한 표고시차보상은 특히 고해상도 영상정합에서 중요하다. 표고시차보상기법은 하나의 밴드를 다른 관측 각을 가지는 다수의 CCD라인으로 구성한 경우에도 적용이 가능하다. 한 밴드에서 촬영된CCD라인 영상들은 연결된CCD라인마다 다른 관측 각을 가짐으로CCD라인간 표고시차가 발생하여 CCD라인간 지상거리 차가 표고에 따라 증가되는 왜곡 현상이 나타나기 때문이다. 이를 보상하기 위해 기준밴드 또는 기준 CCD라인과 대상밴드 또는 대상 CCD라인간 영상과 지상간의 관계를 다항식을 사용하여 수학적으로 모델 하는RFM을 사용하였다. 실험결과, 표고시차가 존재하는 영상에 대해서도 제안된 기법으로 밴드 정합이 성공적으로 수행되는 것을 확인하였다.

• 대한족부족관절학회지
• /
• 제12권1호
• /
• pp.20-25
• /
• 2008

Purpose: The purpose of this study is comparison of radiological and clinical outcomes between proximal metatarsal osteotomy and distal chevron osteotomy for the correction of hallux valgus. Materials and Methods: In this retrospective study, we included subjects who underwent the correction of hallux valgus in our institution between March 2001 and August 2006, with a minimum follow-up of 12 months. The group of proximal metatarsal osteotomy was 23 patients (34 feet); the group of distal chevron osteotomy was 20 patients (26 feet). The group of proximal metatarsal osteotomy was composed of 26 severe cases (76.5%) and 8 moderate cases (23.5%); the group of distal chevron osteotomy was composed of 13 severe cases (50.0%) and 13 moderate cases (50.0%). Results: Compared to preoperative values, the hallux valgus angle, the first-second intermetatarsal angle and the distance of first-fifth metatarsal head were significantly decreased in two groups (p<0.05). In each parameter, the hallux valgus angle was decreased 66.3% (proximal metatarsal osteotomy) versus 49.6% (distal chevron osteotomy), which were significant (p=0.037). The first-second intermetatarsal angle and the distance of first-fifth metatarsal head were not significant. Mayo clinic forefoot scoring system (FFSS) score was significantly improved in two groups (p<0.05). The ratio of improvement was not significant (p=0.762). In severe group, hallux valgus angle and the first-second intermetatarsal angle was significantly decreased in proximal metatarsal osteotomy group compared to distal chevron osteotomy group (p<0.05), but the difference of the distance of first-fifth metatarsal head and FFSS score was not significant in both groups. In moderate group, the difference of all parameters was not significant in both groups. Conclusion: Although both proximal metatarsal osteotomy and distal chevron osteotomy showed satisfactory result in FFSS, proximal metatarsal osteotomy was more proper operative technique than distal chevron osteotomy in severe group, because of superiority of correction in radiological parameters.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.85-88
• /
• 2007

Sea level fluctuation present a direct influence to those who live near the coast. The importance of monitoring sea level is evident. Therefore, various techniques have been employed for sea level measurements such as the coastal water level gauges, satellite altimetry and GPS buoy. Especially, GPS buoys have been used to measure water levels, atmospheric parameter and other physical conditions in sea, tide correction, the altimeter range calibration, ocean environment. In this paper, we will mainly concentrate on the kinematic technique for GPS buoy to measure the sea level. A test was carried out to test the method proposed in this paper, which made use of a GPS buoy equipped to monitor the sea level in Busan. We have executed to analysis about applications of GPS buoy.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.27-30
• /
• 2007

The objective of this study is to improve an accuracy of PWV estimates using GPS in Korea. We determined a weighted mean temperature equation by a linear regression method based on 6 radiosonde meteorological observations, for a total 17,129 profiles, from 2003 to 2005. Weighted mean temperature, Tm, is a key parameter in the retrieval of atmospheric PWV from ground-based GPS measurements of zenith path delay. The accuracy of the GPS-derived PWV is proportional to the accuracy of Tm. And we applied the reduction of air Pressure to GPS station altitude. The reduction value of air pressure from mean sea level to GPS stations altitude is adopted a reverse sea level correction.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.259-262
• /
• 2009

The influence of pre-strain in low-cycle fatigue behavior of Fe-18Mn-0.05Al-0.6C TWIP steel was studied by conducting axial strain-controlled tests. As-received plates were deformed by rolling with reduction ratios of 10 and 30%, respectively. A triangular waveform with a constant frequency of 1 Hz was employed for low cycle fatigue test at the strain amplitudes in the range of ${\pm}0.4{\sim}{\pm}0.6$ pct. The results showed that low-cycle fatigue life was strongly dependent on the amount of pre-strain as well as the strain amplitude. Increasing the amount of prestrain, the number of reversals to failure was significantly decreased at high strain amplitudes, but the effect was negilgible at low strain amplitudes. A new model for predicting fatigue life of pre-strained body has been devised adding a correction term of ${\Delta}E_{pre-strain}$ to the energy-based fatigue damage parameter.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.64-70
• /
• 2015

This paper proposes fluorescent electronic ballast with high power factor and low line input current harmonics. The system performance can be improved by a charged pump circuit. Details of design and circuit operation are described. The proposed electronic ballast is modified from single-stage half bridge class D electronic ballast by adding capacitor parallel with each power switch and setting the circuit parameter to operate under class DE inverter condition. By using this proposed method the DC bus voltage can be reduced around by 50% compare with conventional class D inverter circuit. Because the power switches are operated at zero voltage switching condition and low dv/dt of class DE switching. The experimental results show that the proper frequency of the prototype is around 50 kHz with input power factor of 0.982, $THD_i$ 10.2% at full load and efficiency of more than 90%.