• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.2
• /
• pp.171-177
• /
• 2011

Tensile tests were conducted at low temperatures for the steel materials which are used for outer shell of the vessels making transit through the polar regions. The selected steel materials were GL-DH32, GL-DH36 and GL-EH36. In comparison with the results at room temperature, the yield stress increases approximately by 10 to 13 percent at $-30^{\circ}C$ and by 13 to 19 percent at $-50^{\circ}C$ while the tensile strength increases about by 9 percent at $-30^{\circ}C$ and 11 to 14 percent at $-50^{\circ}C$. To obtain true stress-true strain, i.e. correct plastic hardening characteristics, Bridgman's(1952) necking correction formula was introduced taking triaxial state of stresses after onset of diffuse necking into consideration. Photographs of fractured surfaces were taken by using Scanning Electron Microscope immedately after tensile tests completed and one for GL-EH36 has been presented in this paper.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.210-224
• /
• 2010

The aim of the present study is to investigate the buckling strength of plates and stiffened panels with opening under transverse thrust and shear actions. It is observed that the existing design formulation for critical-buckling strength of plates are not valid for perforated plates, because the current design formulation trends can significantly overestimate or underestimate the load-carrying capacity of plates when plates have large opening and/or are thick. A series of eigen value and elastic.plastic large deflection finite element analyses are carried out with varying the aspect ratio of plate, the opening size and location on plate until and after the ultimate strength is reached. Based on the results obtained from the present study, closed-form design formulations for the elastic buckling strength of plates and stiffened panels with opening are derived. The derived design formulations are considered plasticity correction of the material and verified by experimental tests and results of nonlinear finite element computations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.52-59
• /
• 2008

Recommendation ITU-R S.1062 specifies the performance of digital satellite systems. The performance objectives were given in terms of bit error probability divided by the average number of errors per burst versus percentage of time. This performance objective is highly dependent on the forward error correction(FEC) coding schemes used in the system. This implies that we need an effective way of estimating the error performance of a system by the given FEC scheme. In this paper, we derive theoretical formula to estimate performance measure of digital satellite systems defined in Recommendation ITU-R S.1062. We demonstrate various estimation results, and verify them by comparing to the simulation results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.2
• /
• pp.181-188
• /
• 2013

In this paper, we present a system design for location determination inside the ship. Since the GPS signal can not be received in the interior of the large vessel, we use the vessel wireless AP (Access Point) RSSI (received signal strength indication) to accurately measure the position. We convert the RSSI for the 3 AP's into distance through the Friis formula and get the location through triangulation. The signal strength varies irregularly due to noise making it difficult to obtain the exact location. Thus Kalman filter is used to real-time position correction, that is store in a server database.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.2
• /
• pp.31-39
• /
• 2017

Classify of explosion hazardous areas must be made at the site where flammable materials are used. This reason is that it is necessary to manage ignition sources in of explosion hazardous areas in order to reduce the risk of explosion. If such an explosion hazard area is widened, it becomes difficult to increase the number of ignition sources to be managed. The method using the virtual volume currently used is much wider than the result using CFD(Computational Fluid Dynamics). Therefore, we tried to improve the current method to compare with the new method using leakage characteristics. The result is a realistic explosion hazard if the light gas is calibrated to the mass and the heavy gas is calibrated to the lower explosion limit. However, it is considered that the safety factors should be taken into account in the calculated correction formula because such a problem should be considered as a buffer for safety.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.2
• /
• pp.240-252
• /
• 1998

The purpose of this study is to develop a method for predicting the aerodynamic performance of the low speed airfoils in the 2-dimensional, steady and viscous flow. For this study, the airfoil geometry is specified by adopting the longest chord line system and by considering local surface curvature. In case of the inviscid incompressible flow, the analysis is accomplished by the linearly varying strength vortex panel method and the Karman-Tsien correction law is applied for the inviscid compressible flow analysis. The Goradia integral method is adopted for the boundary layer analysis of the laminar and turbulent flows. Viscous and inviscid solutions are converged by the Lockheed iterative calculating method using the equivalent airfoil geometry. The analysis of the separated flow is performed using the Dvorak and Maskew's method as the basic method. The wake effect is also considered by expressing its geometry using the formula of Summey and Smith when no separation occurs. The computational efficiency is verified by comparing the computational results with experimental data and by the shorter execution time.

• The Journal of Korean Medical History
• /
• v.31 no.2
• /
• pp.9-16
• /
• 2018

Eoyakwonbang is a collection of prescriptions of Yuyaoyuan, an imperial medical bureau of China. While the first edition of this book does not exist at present, two versions printed in Korea, and one printed in Japan, which is the well-known Gyesasingan Eoyakwonbang have been passed down. Eoyakwonbang is a meaningful text for the history of medical communication between China, Japan and Korea, but research on the different versions and contents of Eoyakwonbang have been insufficient. Out of the 2 versions published in Korea, Eulheja Eoyakwonbang is different from Gapjinja Eoyakwonbang [another version in Korea] and Gwanjeong Eoyakwonbang of Japan, in that the prescriptions are organized, the ingredients are organized according to the amount of each ingredient for each formula, and the amounts are recorded in an accurate manner. On the other hand, the Gapjinja version has many mistakes in the characters and content. The Gwanjeong version has lesser mistakes in characters, but repeats the content error of the Gapjinja version. Eulheja was printed after correction based on the original version or unknown version from China. Gapjinja was re-printed based on the Gyesasingan version, while Gwanjeong seems to have used the Gapjinja version as its original script, as the mistakes made in the Gapjinja version are repeated in the Gwanjeong version as well.

• Smart Structures and Systems
• /
• v.30 no.4
• /
• pp.353-369
• /
• 2022

In this paper, a new sensor chip with frequency reconstruction range of 2.252 GHz ~ 2.450 GHz is designed and fabricated. On this basis, a self-designed "T-shaped" shell is added to overcome the disadvantage of uneven deformation of the traditional steel shell, and the range of the sensor chip is expanded to 0 kN ~ 96 kN. The liquid metal antenna is used to carry out a step-by-step loading test, and the relationship between the antenna resonance frequency and the pressure load is analyzed. The results show that there is a good linear relationship between the pressure load and the resonant frequency. Therefore, the liquid metal antenna can be regarded as a pressure sensor. The cyclic loading and unloading experiments of the sensor are carried out, and different loading rates are used to explore the influence on the performance of the sensor. The loading and unloading characteristic curves and the influence characteristic curves of loading rate are plotted. The experimental results show that the sensor has no residual deformation during the cycle of loading and unloading. Moreover, the influence of temperature on the performance of the sensor is studied, and the temperature correction formula is derived.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.609-616
• /
• 2008

Recently, many ocean bridges that connect land to island or island to island have been constructed along with the improvement of the nation's economy. Long-span bridges can be categorized as suspension bridge, cable-stayed bridge, arch bridge and truss bridge. In this study, correction with respect to construction error can be presented on site through the monitoring of the cable tension change of real structure for four major construction stages so that construction accuracy, including the management of profiles, can be improved. A vibration method, the so-called indirect method that uses the cable's natural frequency changes from the acceleration sensor installed on the cable, is applied in measuring cable tension. In this study, the estimation formula for the effective length of cable with damper is presented by comparing and analyzing between actual measurement and analysis result for the change of the cable's effective length. By the way, it is known that the reliability of estimating cable tension by applying the former method that uses the net distance from damper to anchorage is low. Therefore, for future reference of the maintenance stage, the presented formula for estimating the effective length of cable can be used as a reference for the rational decision-making, such as the re-tensioning and replacement of cable.

• Journal of Educational Research in Mathematics
• /
• v.22 no.4
• /
• pp.495-515
• /
• 2012

This study is to diversely analyze teachers' Pedagogical Content Knowledge (PCK) regarding to the area of plane figures and discuss the consideration for the materialization of the effective class in learning the area of plane figures by identifying the improvements based on problems indicated in PCK. The subjects of inquiry are what the problems with teachers' PCK regarding to the area of plane figures are and how they can be improved. In which is the first domain of PCK, teachers need to fully understand the concept of the area and the properties and classification of the area and length, recognized the sequence structure as a subject of guidance and improve the direction which naturally connects the flow of measurement by using random units in guidance of the area. In which is the second domain of PCK, teachers need to establish understanding of the concept for the area and understanding of a formula as a subject matter object and improve the activity, discovery and research oriented class for students as a guidance method by escaping from teacher oriented expository class and calculation oriented repetitive learning. They also need to avoid the biased evaluation of using a formula and evenly evaluate whether students understand the concept of the area as a performance evaluation method. In which is the third domain of PCK, teachers need to fully understand the concept of the area rather than explanation oriented correction and fundamentally teach students about errors by suggesting the activity to explore the properties of the area and length. They also need to plan a method to reflect student's affective aspects besides a compliment and encouragement and apply this method to the class. In which is the fourth domain of PCK, teachers need to increase the use of random units by having an independent consciousness about textbooks and supplementing the activity of textbooks and restructure textbooks by suggesting problematic situations in a real life and teaching the sequence structure. Also, class groups will need to be divided into an entire group, individual group, partner group and normal group.