• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.226-235
• /
• 2000

Two representative finite volume methods, i.e., the time marching method and the pressure correction method, were applied to 8 centrifugal compressor impeller flows, with low to very high level of pressure ratio, among which 7 impellers' experimental performance is given in the open literature. The present study is focused on the prediction differences from both methods, developed by the authors, in the pressure correction method's point of view. In all cases, the time marching method gives a satifactory solution, but the pressure correction method does not. Up to about $18\%$ less level of total-to-total pressure ratio is predicted by the pressure correction method as the level of the impeller pressure ratio increases up to about 10. The drop of total pressure ratio is caused by the underestimation of static pressure rise which seems to be attributed to inappropriate linearization and discretization of the pressure/density coupling terms in the pressure correction equation.

• Nuclear Medicine and Molecular Imaging
• /
• 제42권2호
• /
• pp.112-117
• /
• 2008

Artifact corrections including normalization and attenuation correction were important for quantitative analysis in Nuclear Medicine Imaging. Normalization is the process of ensuring that all lines of response joining detectors in coincidence have the same effective sensitivity. Failure to account for variations in LOR sensitivity leads to bias and high-frequency artifacts in the reconstructed images. Attenuation correction is the process of the correction of attenuation phenomenon lies in the natural property that photons emitted by the radiopharmaceutical will interact with tissue and other materials as they pass through the body. In this paper, we will review the several approaches for normalization and attenuation correction strategies.

• East Asian mathematical journal
• /
• 제36권4호
• /
• pp.437-454
• /
• 2020

The purpose of this study is to develop a mathematical assessment and correction materials according to the mathematics learning hierarchy. The scope of the study is set to 'function' in 7th grade of middle school. The researchers developed a draft of the mathematical assessment and correction materials based on the mathematics learning hierarchy through the pilot test and the expert review. Using the results of the expert review, the researchers modified and supplemented the math assessment and correction materials to produce the final version. The mathematics assessment and correction material developed in this study is expected to build an effective guidance system for students with mathematics deficits. In addition, by presenting a mathematical assessment and correction materials to the teachers in the field, it is possible to reduce the effort for the management of underachievers and to provide guidance for the education of students with a lack of math learning.

• 한국항공운항학회지
• /
• 제22권3호
• /
• pp.74-81
• /
• 2014

The coverage area of GNSS regional ionospheric correction model is mainly determined by the disribution of GNSS ground monitoring stations. Outside the coverage area, GNSS users may receive ionospheric correction signals but the correction does not contain valid correction information. Extrapolation of the correction information can extend the coverage area to some extent. Three interpolation methods, Kriging, biharmonic spline and cubic spline, are tested to evaluate the extrapolation accuracy of the ionospheric delay corrections outside the correction coverage area. IGS (International GNSS Service) ionosphere map data is used to simulate the corrections and to compute the extrapolation error statistics. Among the three methods, biharmonic method yields the best accuracy. The estimation error has a high value during Spring and Fall. The error has a high value in South and East sides and has a low value in North side.

• 한국정보통신학회논문지
• /
• 제26권10호
• /
• pp.1559-1562
• /
• 2022

As electronic devices technology scales down into the deep-submicron to achieve high-density, low power and high performance integrated circuits, multiple bit upsets by soft errors have become a major threat to on-chip memory systems. To address the soft error problem, single error correction, double error detection and double adjacent error correction (SEC-DED-DAEC) codes have been recently proposed. But these codes do not troubleshoot mis-correction problem. We propose the SEC-DED_DAEC code with without mis-correction. The decoder for proposed code is implemented as hardware and verified. The results show that there is no mis-correction in the proposed codes and the decoder can be employed on-chip memory system.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.107-112
• /
• 2008

According to Korean Architectural Standard Specification (KASS) , at the design stage of the specified concrete strength, strength correction with each temperature level should be considered to secure required strength at 28 days even in low temperature condition, In this paper, the period for the strength correction at the stage of mixture design of the concrete using ordinary Portland cement(OPC) specified in KASS was determined with each region of south Korea based on the meteorological data of KMA(Korea meteorological administration) by applying KASS-5 regulation. In case of 28 days of strength control age, the period for strength correction with 6MPa was calculated to $50{\sim}60$ days and, with 3 MPa. to around 80 days. The period for the strength correction was shown to be decreased with the rise of altitude. The period to consider the delay of the strength development due to low temperature including the period of cold weather concrete was nearly 7 months around 1 year. References for determining the strength correction factors with each region of south Korea was provided in this paper. Further investigation of strength correction of the concrete containing blended cement is to studied.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2006년도 공동학술대회 논문집
• /
• pp.221-224
• /
• 2006

소규모 공동 탐지를 위한 시험지역에서 시추공 편차를 고려한 탄성파 토모그래피를 수행하였다. 시추공 편차보정방법은 일정 거리를 더하는 보정과 일정 각을 시추공간 거리에 고려하는 보정을 적용하였다. 시추공 편차를 고려한 토모그래피는 영상의 왜곡을 줄일 수 있어 공동을 명확히 영상화할 수 있었으며, 일정 각을 거리에 고려하는 보정방법이 공동탐지에 가장 효과적이지만 일정 거리 보정도 만족할 만한 결과를 얻을 수 있음을 알 수 있었다.

• 대한원격탐사학회지
• /
• 제34권1호
• /
• pp.127-139
• /
• 2018

The GOCI atmospheric correction overland surfaces is essential for the time-series analysis of terrestrial environments with the very high temporal resolution. We develop an operational GOCI atmospheric correction method over land surfaces, which is rather different from the one developed for ocean surface. The GOCI atmospheric correction method basically reduces gases absorption and Rayleigh and aerosol scatterings and to derive surface reflectance from at-sensor radiance. We use the 6S radiative transfer model that requires several input parameters to calculate surface reflectance. In the sensitivity analysis, aerosol optical thickness was the most influential element among other input parameters including atmospheric model, terrain elevation, and aerosol type. To account for the highly variable nature of aerosol within the GOCI target area in northeast Asia, we generate the spatio-temporal aerosol maps using AERONET data for the aerosol correction. For a fast processing, the GOCI atmospheric correction method uses the pre-calculated look up table that directly converts at-sensor radiance to surface reflectance. The atmospheric correction method was validated by comparing with in-situ spectral measurements and MODIS reflectance products. The GOCI surface reflectance showed very similar magnitude and temporal patterns with the in-situ measurements and the MODIS reflectance. The GOCI surface reflectance was slightly higher than the in-situ measurement and MODIS reflectance by 0.01 to 0.06, which might be due to the different viewing angles. Anisotropic effect in the GOCI hourly reflectance needs to be further normalized during the following cloud-free compositing.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제23권7호
• /
• pp.446-451
• /
• 2017

본 논문에서의 문맥의존 철자오류(Context-Sensitive Spelling Error) 교정 기법은 샤논(Shannon)의 노이지 채널 모형(noisy channel model)을 기반으로 한다. 논문에서 제안하는 교정 기법의 향상에는 보간(interpolation)을 사용하며, 일반적인 보간 방법은 확률의 중간 값을 채우는 방식으로 N-gram에 존재하지 않는 빈도를 (N-1)-gram과 (N-2)-gram 등에서 얻는다. 이와 같은 방식은 동일 통계 말뭉치를 기반으로 계산하는데 제안하는 방식에서는 통계 말뭉치와 교정 문서간의 빈도 정보를 이용하여 보간 한다. 교정 문서의 빈도를 이용하였을 때 이점은 다음과 같다. 첫째 통계 말뭉치에 존재하지 않고 교정 문서에서만 나타나는 신조어의 확률을 얻을 수 있다. 둘째 확률 값이 모호한 두 교정 후보가 있더라도 교정 문서를 참고로 교정하게 되어 모호성을 해소한다. 제안한 방법은 기존 교정 모형보다 정밀도와 재현율의 성능향상을 보였다.

• 대한원격탐사학회지
• /
• 제27권2호
• /
• pp.89-98
• /
• 2011

위성 카메라전자부의 화소간 불균일성 응답의 보정을 위한 4종류의 이득과 오프셋 보정계수에 대하여 다루었다. 이들에 대한 비교분석을 위해서 CCD를 광검출기로 하는 카메라전자부를 새롭게 제작하고, 이를 이용하여 얻은 영상 데이터에 대하여 이들 4종의 보정계수를 이용하여 보정을 실행한 후 각각의 보정 성능을 비교하였다. 일반적으로 보정성능은 기준 영상을 얻기 위하여 사용된 빛입력 레벨의 개수에 따라 달라지게 된다. 쉽게 예상될 수 있는 바와 같이, 2 레벨의 빛입력 기준영상만을 이용하여 얻은 보정계수의 경우 보정계수를 계산하기가 쉽다는 이점을 갖고 있지만, 보정성능은 상대적으로 떨어진다는 것을 확인할 수 있었다. 이에 비해 보정계수를 구하기 위하여 사용된 기준영상의 빛입력 레벨의 개수가 2보다 큰 값으로 늘어날 경우, 보정성능은 개선되었다. 하지만 각각의 보정계수들간의 보정성능 상에는 큰 차이가 없는 것으로 평가되었다.