• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.39-42
• /
• 2010

This Study describes the mountainous area which is located in Gyeongsangbuk-do and Jeollanam-do used the relative gravimeter in the object and is measured and the gravity data which used orthometric correction, is a physical height the altitude in compliance with the level measurement which is an altitude and a geometric height is really a difference in compliance with the method which is various calculated orthometric height. In addition, calculated by various were compared & analyzed by orthometric correction against the objective area to determine the appropriate orthometric correction method of calculation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.2
• /
• pp.12-20
• /
• 2008

Japanese MSAS (Multi-functional Satellite Augmentation System) satellites have been transmitting GPS satellite orbit and ionosphere correction information since 2005. MSAS coverage includes Far East Asia, and it can improve the accuracy and integrity of GPS position solutions in Korea. This research analyzed the ionosphere correction information from the MSAS ionosphere correction data. The ionosphere delay data observed by a dual frequency receiver is compared with the MSAS ionosphere correction data. The variation of MSAS GIVE values are analyzed in connection with the equatorial anomaly and ionosphere scintillation.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.925-930
• /
• 1995

A new approach on the correction for Compton escape component in X-ray unfolding algorithm was investigated to obtain more accurate X-ray source spectrum. The X-ray detector used in this study was a planar type HPGe detector(EG&G ORTEC, GLP-32340/13-P-LP) whose energy response has been blown and ISO narrow beam series were employed as source spectrum. At lower energy Part of measured X-ray spectrum including the correction for Compton escape component more accurate unfolded spectrum was obtained by letting down the starting energy level of the collection in existing spectrum correction procedure to consider multiple scattering effects. It is, from this study, concluded that accurate correction for Compton escape component is needed in X-ray unfolding procedure since Compton scattering becomes more important as incident X-ray energies increase.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.369-372
• /
• 2009

When measuring the luminous flux of a light source at the integrating sphere photometer, it can know the luminous flux to compare the standard lamp with the specimen lamp at the same location. But in case of PLS(plasma lighting system, microwave discharged lamp), that two lamps are cannot be the same location. If the reference illuminant and specimen lamp are cannot measure identical location, we should measure the variation of the luminous flux. For the outcome we can turn out a correction factor to revise and reflect it. But the better way is calibrate the specimen lamp locate the identical location of reference illuminant measured. In this thesis, we've test to find the correction factor for consider that change the measuring location. And it turns out the correction factor. From this, it presents the result to make a select for the reference illuminant which is against the illuminant type for newly produce.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.219.2-219.2
• /
• 2012

We are developing Adaptive Optics (AO) system for 24 inch telescope at Seoul National University Observatory. It consists of the tip-tilt correction system and the residual wavefront error correction system with a deformable mirror and a wavefront sensor. We present the construction and performance measurements of the tip-tilt correction system. The tip-tilt component is the single largest contributor to wavefront error, especially for small telescope. The tip-tilt correction system consists of a quadrant photodiode, a tip-tilt mirror and a feed back loop. The collimated He-Ne laser beam is used for input light source and is artificially disturbed by air turbulence generated by a heat gun. Most of the turbulence is of low frequency less than 20 Hz, but extends to a few hundreds Hz. It is found that the closed loop system using proportional-integral-derivative (PID) control successfully corrects tip-tilt error at a rate as high as 300~400 Hz.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.42-50
• /
• 2005

In this paper, a novel method is proposed how the ECC(Error Correction Code) in server system can be investigated and the robustness of each system against noisy environment and element failure in memory module has been verified. Chipset manufacturers have hided the algorithm of their Hamming code and the user has difficulty in verification of the robustness of each system. The proposed method is very simple, but the outputs of the experiment explain the core ability of error correction in server system and helps the detection of the failure element. On the basis of these results, we could expect the robustness of digitalized weapon system and the efficient design of our own error correction code.

• International Journal of Contents
• /
• v.9 no.2
• /
• pp.22-26
• /
• 2013

Comparing online and paper-based environment for report submission and correction, the former supersedes to the latter, since (1) the turn-around time becomes shorter, (2) teaching opportunity increases, and (3) as a consequence, the student's achievement level becomes higher in the online environment. In this paper, we propose an annotation tool GABA for PDF document in order to reduce correction time by the teachers and to facilitate instruction to students. In a usual class, the same or similar assignments are given to the students. Then it is often the case that many students make similar mistakes. A teacher can register and classify common correction comments to GABA. Report correction time becomes significantly shorter by reusing the registered comments. GABA also provides various support functions in order to assist efficient checking of numerous report files such as (1) sorting of frequently-used comments, (2) similarity-based file sorting, and (3) cross tabulation of comments using category and weight.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1168-1170
• /
• 2003

The GMS geometric correction method with highspeed and high accuracy is needed. In this paper, a selection method of residual errors for the GMS geometric correction using GCPs (ground control points) is described. Namely, it is a technique for limiting the number of residual error acquisition using GCPs in each block to reduce the processing time. As the result, since the processing time was about 7.0 minutes on conventional geometric correction and about 5.6 minutes on the proposed method, it was shown that the processing time of about 1.4 minutes was shortened.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.549-551
• /
• 2003

Satellite images are utilized for various purposes and many people are concerned about them. But it is necessary to process geometric correction for using of satellite images. However, common user regards geometric correction, which is basic preprocessing for satellite image, as laborious job. Therefore we should provide an automatic geometric correction method for Landsat image using GCP chip database. The GCP chip database is the collection of pieces of images with geoinformation and is provided by XML web service. More specifically, XML web service enables common users to easily use our GCP chip database for their own geometric correcting applications.

• Korean Journal of Remote Sensing
• /
• v.26 no.6
• /
• pp.645-652
• /
• 2010

The performance of the payload Electro-Optical System (EOS) in satellite system is affected by various factors, such as optics design, camera electronics design, and the characteristics of the CCD (Charge Coupled Device) used, etc. Of these factors, the camera electronics design is somewhat unique in that its operational parameters can be adjusted even after the satellite launch. In this paper, the effect of video gain on the non-uniformity correction performance is addressed. And a new optimal non-uniformity correction scheme is proposed and analyzed using the data from real camera electronics unit based on a TDI (Time Delayed Integration) type of CCD. The test results show that the performance of the conventional non-uniformity correction scheme is affected significantly when the video gain is added. On the other hand, in our proposed scheme, the performance is not dependent on the video gain. The insensitivity of the non-uniformity performance on the video-gain is mainly due to the fact that the correction is performed after the dark signal is subtracted from system response.