• Journal of Korea Water Resources Association
• /
• v.52 no.1
• /
• pp.21-33
• /
• 2019

This study performed to simulate the watershed storm runoff using data of S-band dual-polarization radar rain, GPM (Global Precipitation Mission) satellite rain, and observed rainfall at 21 ground stations operated by KMA (Korea Meteorological Administration) respectively. For the 3 water level gauge stations (Sancheong, Changchon, and Namgang) of NamgangDam watershed ($2,293km^2$), the KIMSTORM2 (KIneMatic wave STOrm Runoff Model2) was applied and calibrated with parameters of initial soil moisture contents, Manning's roughness of overland and stream to the event of typhoon CHABA (82 mm in watershed aveprage) in $5^{th}$ October 2016. The radar and GPM data was corrected with CM (Conditional Merging) method such as CM-corrected Radar and CM-corrected GPM. The CM has been used for accurate rainfall estimation in water resources and meteorological field and the method combined measured ground rainfall and spatial data such as radar and satellite images by the kriging interpolation technique. For the CM-corrected Radar and CM-corrected GPM data application, the determination coefficient ($R^2$) was 0.96 respectively. The Nash-Sutcliffe efficiency (NSE) was 0.96 and the Volume Conservation Index (VCI) was 1.03 respectively. The CM-corrected data of Radar and GPM showed good results for the CHABA peak runoff and runoff volume simulation and improved all of $R^2$, NSE, and VCI comparing with the original data application. Thus, we need to use and apply the radar and satellite data to monitor the flood within the watershed.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.295-308
• /
• 2000

OSMI(Ocean Scanning Multi-Spectral Imager) raw image data(Level 0) were acquired and radiometrically corrected. We have applied two methods, using solar & dark calibration data from OSMI sensor and comparing with the SeaWiFS data, to the radiometric correction of OSMI raw image data. First, we could get the values of the gain and the offset for each pixel and each band from comparing the solar & dark calibration data with the solar input radiance values, calculated from the transmittance, BRDF (Bidirectional Reflectance Distribution Function) and the solar incidence angle($\beta$, $\theta$) of OSMI sensor. Applying this calibration data to OSMI raw image data, we got the two odd results, the lower value of the radiometric corrected image data than the expected value, and the Venetian Blind Effect in the radiometric corrected image data. Second, we could get the reasonable results from comparing OSMI raw image data with the SeaWiFS data, and get a new problem of OSMI sensor.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.134-137
• /
• 1998

NOAA satellite data and GMS data have been received at the Institute of Industrial Science, University of Tokyo since early 80's and 1994, respectively. So far, all data are archived and users can look their quick look images through the Internet and get the data by request. The following processed data set will be available soon with the corporation with the Science University of Tokyo: Radiometrically corrected by 65 code and geometrically corrected NOAA data with the corporation with Iwate University and NDVI, SST and cloud classified images as their products. 1 km AVHRR Land Project Data Set of Asia and their 14 regional subsets. Geometrically corrected GMS images and surface temperature maps, sea surface temperature maps and cloud classification maps.

• Journal of Computational Design and Engineering
• /
• v.2 no.2
• /
• pp.96-104
• /
• 2015

Aluminum die casting is an important manufacturing process for mechanical components. Die casting is known to be more accurate than other types of casting; however, post-machining is usually necessary to achieve the required accuracy. The goal of this investigation is to develop machining- free aluminum die casting. Improvement of the accuracy of planar and cylindrical parts is expected by correcting metal molds. In the proposed method, the shape of cast aluminum made with the initial metal molds is measured by 3D scanning. The 3D scan data includes information about deformations that occur during casting. Therefore, it is possible to estimate the deformation and correction amounts by comparing 3D scan data with product computer-aided design (CAD) data. We corrected planar and cylindrical parts of the CAD data for the mold. In addition, we corrected the planar part of the metal mold using the corrected mold data. The effectiveness of the proposed method is demonstrated by evaluating the accuracy improvement of the cast aluminum made with the corrected mold.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.1
• /
• pp.263-271
• /
• 2004

This article presents a new measure of chance-corrected interobserver agreement among multivariate ratings of many observers. Modifying an approach by Berry and Mielke, a new agreement measure is proposed. The important modificaton is to use the volume of simplex composed of data points as the disagreement masure. The proposed measure accounts agreement for multivariate interval observations among many observers. Hypothetical and real-life data sets are analyzed for illustrative purpose.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.16-25
• /
• 1997

This paper shows the development of the high accuracy vehicle positioning algorithm using the differential technique in vehicle tracking systems form the existing vehicle position which is acquired from the global positioning system (GPS). The control center receives the satellite ephemerise data and pseudorange correction from the reference station, and vehicle position from the moving vehicle. The pseudorange is calculated with the satellite position and the vehicle position, and corrected by pseudorange correction. Using this corrected pseudorange and kalman filter, more improved vehicle positioning data were obtained.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.5
• /
• pp.895-903
• /
• 2009

The penalized partial likelihood based on restricted maximum likelihood method has been widely used for the inference of frailty models. However, the standard-error estimate for frailty parameter estimator can be downwardly biased. In this paper we show that such underestimation can be corrected by using hierarchical likelihood. In particular, the hierarchical likelihood gives a statistically efficient procedure for various random-effect models including frailty models. The proposed method is illustrated via a numerical example and simulation study. The simulation results demonstrate that the corrected standard-error estimate largely improves such bias.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.167-170
• /
• 2007

In the present paper, wall correction method is reviewed and applied to the numerical experimental results obtained at the wind tunnel condition. The corrected lift coefficient agrees well with the reference data generated from the grid having very far boundary. However the corrected drag coefficient presents some deviation from the reference data.

• Journal of Distribution Science
• /
• v.15 no.11
• /
• pp.49-57
• /
• 2017

Purpose - In Korea, general super markets have a great impact on the market performance of traditional markets. We propose a modified two stage DEA model for evaluating the performance of traditional markets in Incheon, Korea by identifying the influence of external environmental factors including the presence of general super markets as non-discretionary variables in DEA. Research design, data, and methodology - After obtaining bias-corrected estimates of original DEA efficiency scores using the input and output data of 49 traditional markets, we regress them on several external environmental factors by bootstrap-truncated regression. Results - We obtain bias-corrected efficiency scores from the original DEA efficiency scores by bootstrap and among the five environmental factors, the residential population and the presence of general super markets or SSMs can be considered as the driving forces influencing bias-corrected efficiency scores, positively and negatively, respectively. Conclusions - When DEA efficiency scores tend to be overestimated, we need to use a biased-corrected efficiency score by bootstrap. It is important to note that the efficiency of traditional markets can be largely influenced by external environmental factors such as the presence of general super markets or SSMs that traditional markets can not control. Therefore, it is desirable to consider such environmental factors appropriately for a reasonable performance evaluation.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.3
• /
• pp.281-286
• /
• 2010

Purpose: This research provided basic data for refraction by comparing the corrected diopter of trial lens and phoropter. Methods: We compared the corrected diopter of trial lens and phoropter, and analyzed statistical significance and relations of the spherical lens corrected diopter and cylindrical lens corrected diopter according to the types (trial lens and phoropter) of subjective refractive instruments. Also we analyzed statistical significance and relations between cylindrical lens corrected diopter at the astigmatism and the types (trial lens and phoropter) of subjective refractory instruments. Results: When we measured the corrected diopter of simple myopia, the mean value for corrected diopter was S-2.74D using the trial lens and S-2.65D using the phoropter. So the corrected diopter was 0.09D smaller when measured by phoropter. The degree of astigmatism was measured C-0.81D using the trial lens and C-0.77D using the phoropter which showed that the measured value was 0.04D smaller using the phoropter. On correlation analysis between the refractive instruments (trial lens and phoropter) and the corrected diopter, there was significant (p<0.01) strong correlation between refractory machine and corrected spherical diopter (r=0.996) and the correlation between refractory machine and corrected cylindrical diopter was r=0.986 and was also significant (p<0.01). Conclusions: The use of phoropter than trial lens was more desirable when performing refraction on high myopia (simple refractive error, high astigmatism), and when using trial lens, you should consider the vertex distance and the gap between overlapped lenses before prescription.