• Journal of Microbiology and Biotechnology
• /
• 제17권7호
• /
• pp.1071-1078
• /
• 2007

Using a 50-1 airlift bioreactor, for the effective production of tylosin from Streptomyces fradiae TM-224 using raw cornmeal as the energy source, various environmental factors were studied in flask cultures. The maximum tylosin concentration was obtained at $32^{\circ}C$ and pH between 7.0 and 7.5. When seed was inoculated after 24 h of culture, the maximum tylosin concentration, 5.7 g/l, was obtained after 4 days of culture. Various concentrations of raw cornmeal were tested to investigate the optimum initial concentration for the tylosin production. An initial raw cornmeal concentration of 80 g/l gave the highest tylosin concentration, 5.8 g/l, after 5 days of culture. Of the various nitrogen sources, soybean meal and fish meal were found to be the most effective for the production of tylosin. In particular, with the optimal mixing ratio, 12 g/l of soybean meal to 14 g/l of fish meal, 7.2 g/l of tylosin was obtained after 5 days of culture. To compare raw cornmeal and glucose for the production of tylosin in the 50-1 airlift bioreactor for 10 days, fed-batch cultures were carried out under the optimum culture conditions. When raw com meal was used as the energy source, the tylosin production increased with increasing culture time. The maximum tylosin concentration after 10 days of culture was 13.5 g/l, with a product yield from raw cornmeal of 0.123 g/g of consumed carbon source, which was about 7.2 times higher than that obtained when glucose was used as the carbon source.

• 한국식품과학회지
• /
• 제27권2호
• /
• pp.251-256
• /
• 1995

팽화제품의 맛과 조직감을 향상시키기 위해 sucrose를 첨가한다. 또한 유화제를 첨가하면 압출성형동안 아밀로스와 복합체를 형성하여 반죽의 물성을 변화시켜 팽화제품의 성질에 영향을 미친다. 이들 첨가제는 $CO_{2}$ 주입에 의한 압출성형공법에서도 조직감과 기공형성을 향상시킬 수 있다. 이 실험에서는 sucrose(5%, 10%)와 GMS(0.75%, 1%)를 옥수수 가루와 혼합하여 $CO_{2}$ 개스 주입압력을 1.04에서 2.07 MPa를 변화시킬 때의 시스템 변수와 제품의 특성을 검토하였다. $CO_2$ 개스를 주입시킴에 따라 반죽온도는 증가하였고, 사출구 압력은 감소하는 경향을 보였다. Sucrose의 첨가에 의해 반죽온도, SME투입과 사출구 압력은 감소하는 경향을 보였다. GMS첨가에 의해 SME 투입량의 변화는 없었지만, 0.75% GMS첨가에 의해 팽화제품의 밀도는 대조구와 비교하여 감소하였다. GMS 첨가에 의한 수용성지수와 paste 점도도 감소하는 경향을 보였다. $CO_{2}$ 주입압력에 따라서 paste 점도는 크게 차이를 보이지는 않았다. GMS를 첨가할 경우 $CO_{2}$ 주입에 의한 기공형성력이 증가하여 제품의 조직감이 향상되었다. 밀도는 $CO_{2}$ 주입압력 1.38 MPa, 0.5% GMS 첨가시 최소치인 $0.22g/cm^{3}$를 보였다.

• 한국식품과학회지
• /
• 제29권5호
• /
• pp.947-954
• /
• 1997

옥수수가루에 건조유제품을 첨가하여 탄산가스의 주입에 의해 반죽의 온도 $100^{\circ}C$ 이하에서 팽화시킨 몇 가지 제품의 물리적 성질과 기계적 에너지 투입량을 분석하였다. 첨가된 유제품은 전지분유, 유청단백질 농축물, 탈지분유, 카제인 나트륨이며, 첨가량은 옥수수가루의 무게비로 10%와 20%를 각각 첨가시켰다. 압출성형기 바렐로 주입되는 가스압력을 0.7 MPa과 1.4 MPa로 조절하여 옥수수가루를 팽화시켰다. 시스템변수인 비기계적 에너지 투입량은 지방의 함량이 높은 전지분유의 첨가량이 증가할수록 감소하였다. 또한 카제인 나트륨의 첨가에 의한 비기계적 에너지의 투입량의 감소도 적었다. 압출성형물의 밀도는 주입압력 0.7 MPa까지는 점차적으로 감소하다가 그 이상의 압력에서는 증가하였다. 가스주입압력 0.7 MPa에서 유제품의 함량이 0, 10, 20%로 증가할수록 밀도는 증가하는 경향을 보였으며, 카제인 나트륨을 첨가했을 때 밀도가 증가하는 정도가 가장 낮았다. 가스주입압력이 0.7 MPa까지 팽화율은 증가하다가 그 이상의 주입압력에서는 감소했지만, 비길이는 계속 증가하는 경향을 나타내었다. 수분흡착지수는 유제품의 첨가에 의해 감소하는 경향을 나타내었고, 반면에 수분용해지수는 증가하는 경향을 보였다. 본 압출성형시스템을 이용한 유제품을 첨가한 옥수수가루 압출성형물 제조시 최적 가스주입압력은 0.7 MPa이였으며, 전지분유의 첨가는 제한인자가 되었으나, 카제인 나트륨의 첨가에 의하여 유제품의 첨가량을 높일 수 있었다.

• 한국균학회지
• /
• 제3권2호
• /
• pp.7-12
• /
• 1975

지금(只今)까지 한국(韓國)에는 담배, 오이, 참외, 인삼(人參) 등(等)에서 입고병(立枯病)을 일으키는 Pythium debaryanum을 보고(報告)한 것 뿐이였으나 1975년(年) 저자(著者)들은 3종(種)의 미기록(未記錄) Pythium 균(菌)을 동정(同定)할 수 있었다. P. spinosum Sawada는 양배추에서 P. myriotylum Drechl은 강낭콩에서 그리고 P. butleri Subr는 오이, 시금치, 팥, 무우등(等)의 기주(寄主)에서 분리(分離)하였다. P. myriotylum과 P. butleri는 병원성(病原性)이 인정(認定)되었으나 P. spinosum는 병원성(病原性)이 없는 것으로 나타났다. Cornmeal agar 배지(培地)에서는 대부분(大部分)의 분리균(分離菌)이 완전(完全)한 자실체형성(字實體形成)이 되지 않았으며 몇 개의 분리균(分離菌)은 같은 배지(培地)에서 계대배양(繼代培養)함에 따라 퇴화(退化)된 자실체(字實體)를 형성(形成)하였다. 그러나 해바라기 종자(種子)를 이용(利用)한 배지(培地)에서는 모든 분리균(分離菌)이 만족(滿足)할만한 자실체(字實體)를 형성(形成)하였다.

• 한국식품영양과학회지
• /
• 제30권2호
• /
• pp.292-298
• /
• 2001

This study was conducted to investigate physicochemical properties of extrudates combining 4 levels of squid (0, 3, 5 and 7%) with 3 levels of defatted soy flour (0, 5, and 10%). Blends were adjusted to moisture content of 27% and then extruded in a single-screw laboratory extruder at 170rpm screw speed and 16$0^{\circ}C$ barrel temperature. The extruded materials were dried at 6$0^{\circ}C$ for 8hr to a moisture content of 3~4% and refrigerated at 4$^{\circ}C$ for 12 hour before examination for textural properties, expansion ratio, bulk density, shear force and Hunter color. Expansion ratio of extrudates decreased as squid content increased whereas bulk density and shear force increased. Expansion ratio of extrudates was not significantly different by defatted soyflour level. Bulk density of products decreased as defatted soyflour content increased but shear force of products increased as defatted soyflour content increased. In scores of sensory hedonic evaluation of snacks, appearance, flavor, texture and overall acceptability values had lowered as squid level increased. Therefore, according to materials contents on extrudates increased, nutritional contents of this products increased and also shear force and bulk density in physical properties increased whereas expansion ratio decreased.

• 한국균학회지
• /
• 제51권2호
• /
• pp.101-109
• /
• 2023

A fungal strain designated KNUF-21-66Q1 was isolated from soil in Chungcheongbuk Province, Korea. Moderate growth of colonies was observed on potato dextrose agar, oatmeal agar (OA), malt extract agar, and cornmeal agar media at 25℃, and the detailed morphology was examined on OA medium. The colonies on OA medium were flat, had entire margin, hyaline, and yellow concentric rings in 3-4 weeks. Conidiomata were pycnidial, solitary or clustered, globose to subglobose, black-brown, and 300-500 ㎛ in diameter. Conidiogenous cells were smooth, hyaline, globose to ampulliform, and 6.0-9.0×3.0-6.0 ㎛ in size (n=15). Conidia were hyaline to pale brown, slightly golden, obovoid to slightly ellipsoidal, smooth, guttulate, and 3.0-4.7×2.1-3.3 ㎛ in size (n=100). The strain was confirmed based on phylogenetic analysis using internal transcribed spacer regions, the partial 28S rDNA of large subunit, and β-tubulin gene sequences. The morphological observations and phylogenetic analysis revealed that the strain KNUF-21-66Q1 was similar to the previously described Paraconiothyrium kelleni. To our knowledge, this is the first report of P. kelleni in Korea.

• 한국균학회지
• /
• 제50권4호
• /
• pp.319-329
• /
• 2022

In July 2020, wilting symptoms were observed among adzuki bean plants (Vigna angularis var. angularis L.) in the fields in Yeosu, Korea. Infected plants showed yellowing of leaves, browning inside the stems, splitting of stem bark, and wilting. When these plants were uprooted, their roots were found to be brown. The fungal pathogens NC20-737, NC20-738, and NC20-739 were isolated from symptomatic stem and root tissues. These pathogens were identified as a Fusarium fujikuroi species complex based on their morphological characteristics. Molecular identification was performed using the DNA sequence of translation elongation factor 1 alpha and the RNA polymerase II second largest subunit regions. The nucleotide sequences of all three isolates were similar to the F. fujikuroi reference isolates NRRL 13566 and NRRL 5538 of the National Centre for Biotechnology Information GenBank. A pathogenicity test was conducted by the soil inoculation method with cornmeal sand inoculum. Approximately 3 weeks after inoculation, symptoms were observed only in the inoculated adzuki bean seedlings. To the best of our knowledge, this is the first report of Fusarium root rot caused by F. fujikuroi in adzuki beans, both in Korea and worldwide.

• The Plant Pathology Journal
• /
• 제35권6호
• /
• pp.674-683
• /
• 2019

Some species of the Trichoderma genus are reported as the major problem in oak wood mushroom production in Korea. In spite of economic loss by the fungi, scientific information on airborne Trichoderma species is not much available. To generate information for disease management development we analyzed airborne Trichoderma. A total of 1,063 fungal isolates were purely obtained from indoor air sampling of cultivation houses used for oak wood mushroom using sawdust media. Among the obtained isolates, 248 isolates were identified as Trichoderma fungi including T. harzianum, T. atroviride, T. citrinoviride, and T. pseudokoningii, by morphological and molecular analysis. T. harzianum was dominant among the four identified species. All the four Trichoderma species grew fast on solid nutrient media tested (potato dextrose agar [PDA], malt extract agar [MEA], Czapek's Dox + yeast extract agar [CYA] and cornmeal dextrose agar). Compact mycelia growth and mass spore production were better on PDA and CYA. In addition, T. harzianum and T. citrinoviride formed greenish and yellowish mycelium and spores on PDA and CYA. Greenish and yellowish pigment was saturated into PDA only by T. pseudokoningii. These four Trichoderma species could produce extracellular enzymes of sawdust substrate degradation such as β-glucosidase, avicelase, CM-cellulase, amylase, pectinase, xylanase, and protease. Their mycelia inhibited the growth of oak wood mushroom mycelia of two tested cultivars on dual culture assay. Among of eleven antifungal agents tested, benomyl was the best to inhibit the growth of the four Trichoderma species. Our results demonstrate that the airborne Trichoderma fungi need to be properly managed in the cultivation houses for safe mushroom production.

• 한국식물병리학회지
• /
• 제14권6호
• /
• pp.646-650
• /
• 1998

Mycological characteristics of Phytophthora nicotianae var. nicotianae SPC10 (A1 type) causing Phytophthora rot of strawberry and the resistances of 11 strawberry cultivars against the pathogen were examined. Optimum temperature for the mycelial growth of the pathogen was obtained in the range of 30~35$^{\circ}C$, and the growth was completely stopped under 13$^{\circ}C$ or over 42$^{\circ}C$. Aerial mycelia were abundant on oatmeal agar (OMA), V-8 juice agar (V8A) and lima bean agar (LBA) medium, although there were slight differences, however, on cornmeal agar (CMA) medium, it was a shape of stellate without aerial mycelia. The colony shape on potato dextrose agar (PDA) medium was rough and irregular whereas the mycelial growth was slow, and some aerial mycelia were only produced in the middle of PDA medium. Optimum temperature for sporangial formation was 3$0^{\circ}C$, and zoospores were mostly released at $25^{\circ}C$ from the sporangia. Sporangia were more produced in C/Z solution with pH 5. 0~6.$0^{\circ}C$ than sterilized distilled water (DSW) and distilled water (DW), and zoospores were also released much more than other solutions. Eleven strawberry cultivars such as Reiko, Hokowase, Eyeberry, Akaneko, Sistakara, Toyonoka, Nyoho, Sulhong, Suhong, Myhong and Wonkyo #3104 revealed the disease incidence up to 88.9~100% by the leaf inoculation with mycelial disk. However, Nyoho and Suhong showed higher level of resistance against the pathogen by root inoculation.