• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.487-495
• /
• 2003

Bearings at the obtuse corner are subjected to much larger vertical reactions than other bearings because of the geometric shape of skew bridges. The current relevant specifications require that additional bars should be disposed at the bottom of concrete deck slabs to deal with the large vertical reaction on bearings at the obtuse corner. In this study, new methods of reducing the magnitude of the vertical reaction on bearings at the obtuse corner by the stiffness adjustment of bearings were proposed. The basic concept of proposed methods was to redistribute support reactions by reducing the vertical stiffness of bearings at the obtuse corner showing a relatively large vertical reaction. For 45 simply supported skew bridges designed according to the current relevant specifications, the redistribution effect of vertical reactions by the stiffness adjustment of bearings was investigated. Parameters such as skew angle, girder spacing, and deck aspect ratio that affect the distribution of support reactions were considered. The results of the analyses show that the magnitude of the vertical reaction on bearings at the obtuse corner can be reduced to the levels of straight bridges by replacing the existing bearings at the obtuse corner with new ones having the value of 1/10 or 1/20 of the vertical stiffness of the existing bearings. The reduction effect of the vertical reaction on bearings at the obtuse corner increases as the girder spacing decreases and it is more pronounced when the deck aspect ratio is 2.0.

• Structural Engineering and Mechanics
• /
• 제51권3호
• /
• pp.471-485
• /
• 2014

Until now, the finite corner stiffness of the right-angle frames used as horizontal girders in a bonnet, have not been considered during the design process to result in not a precise result. This paper presents a design equation set for right-angle frames used as horizontal girders in a bonnet assuming rigid corner stiffness. By comparing the center stresses of the right-angle frame according to the design equation set with the results of the finite element method, the master curves for the empirical corner stiffness can be determined as a function of slenderness ratio. A second design equation set for a right-angle frame assuming finite corner stiffness was derived and compared with the first equation set. The master curves for the corner stiffness and the second design equation set can be used to determine the design moments at the centers of the girder so that the bending stresses can be analyzed more precisely.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.181-189
• /
• 2000

The aerodynamic characteristics of large transport vehicle has become more and more important in recent vehicle design to improve driving performance in high speed cruising and raise the product valve with regard to a comfortable driving condition. Hence, detailed knowledge of the flow field around truck coner vane is essential to improve fuel efficiency and reduce the dirt contamination on vehicle body surface. In this study, three-dimensional flow characteristics around corner vane attached to truck cabin were computed for the steady, incompressible, and high speed viscous flow, adopting the RNG k-$\varepsilon$ turbulence model. In order to investigate the influence of configuration and structure of corner vane, computations were carried out for four cases at a high Reynolds number, Re=4.1$\times$106 (based on the cabin height). The global flow patterns, drag coefficient and the distributions such as velocity magnitude, turbulent kinetic energy around the corner vane, were examined. As a result of this study, we could identify the flow characteristics around corner vane for the variation of corner vane length and width. Also, suggest the improved structure to reduce the dirt contamination in cabin side.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.847-850
• /
• 1998

This paper proposes a new scheme of FLR for improving corner breakdown voltage. The major difference from the conventional FLR is to build extra rings and floating field plates in the corner region. In this structure the additional field plate and ring have reduced th electric field at the junction in the corner region. Thus it improves the breakdown characteristics which are critical for obtaining high breakdown voltage.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권4호
• /
• pp.284-290
• /
• 2013

Feature detection is very important to image processing area. In this paper we compare and analyze some characteristics of image processing algorithms for corner and blob feature detection. We also analyze the simulation results through image matching process. We show that how these algorithms work and how fast they execute. The simulation results are shown for helping us to select an algorithm or several algorithms extracting corner and blob feature.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5051-5059
• /
• 2015

농업용 트랙터 프론트 로더의 낙하정지시험, 코너당김시험, 코너충돌시험의 세 가지 충격시험 조건에 대하여 강체동해석, 과도구조해석, 정적구조해석 등을 수행하여 각 부품의 응력분포를 구하고 안전성을 평가하였다. 낙하정지시험은 프론트 로더를 최대높이에서 시작하여 세 단계로 나누어 낙하시킨 후 정지시켜서 충격을 가하는 경우를 해석하였다. 코너당김시험은 체인으로 버켓 밑면의 모서리를 지면에 구속한 상태에서 프론트 로더를 갑자기 상승시키는 경우를 해석하였다. 코너충돌시험은 주행 중에 버켓의 모서리가 충격장애물과 충돌하는 경우를 해석하였다. 세 가지 충격시험 조건에 대한 해석 결과, 모두 마운트의 사각관 모서리와 마운트의 양쪽 꺾임 위치에서 국부적 응력집중이 발생하였다. 이러한 결과를 바탕으로 새로운 프론트 로더의 설계 및 수정 시 파단에 관한 안전성을 개선하는데 도움이 될 것으로 기대된다.

• Wind and Structures
• /
• 제32권3호
• /
• pp.227-238
• /
• 2021

This study analyzed the pressure patterns and local pressure of tall buildings with corner modifications (recessed and chamfered corner) using wind tunnel tests and proper orthogonal decomposition (POD). POD can distinguish pressure patterns by POD mode and more dominant pressure patterns can be found according to the order of POD modes. Results show that both recessed and chamfered corners effectively reduced wind-induced responses. Additionally, unique effects were observed depending on the ratio of corner modification. Tall building models with recessed corners showed fluctuations in the approaching wind flow in the first POD mode and vortex shedding effects in the second POD mode. With large corner modification, energy distribution became small in the first POD mode, which shows that the effect of the first POD mode reduced. Among building models with chamfered corners, vortex shedding effects appeared in the first POD mode, except for the model with the highest ratio of corner modifications. The POD confirmed that both recessed and chamfered corners play a role in reducing vortex shedding effects, and the normalized power spectral density peak value of modes showing vortex shedding was smaller than that of the building model with a square section. Vortex shedding effects were observed on the front corner surfaces resulting from corner modification, as with the side surface. For buildings with recessed corners, the local pressure on corner surfaces was larger than that of side surfaces. Moreover, the average wind pressure was effectively reduced to 88.42% and 92.40% in RE1 on the windward surface and CH1 on the side surface, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.939-940
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.13-14
• /
• 2009

• Journal of the Korean Wood Science and Technology
• /
• 제17권2호
• /
• pp.34-64
• /
• 1989

포장(包裝) 용적(容積) 감소에 따른 수송비(輸送費) 절감(節減) 효과(效果)가 있어 조립시(組立式) 탁자류(卓子類) 가구(家具)의 제작(製作)에 널리 쓰이는 CBA(corner block with anchor bolt) 접합방식(接合方式)은 일정기간(一定期間) 사용(使用)함에 따라 접합부위(接合部位)가 약해지고 그 결과(結果) 구조(構造)가 불안정(不安定)하게 되는 반강접합(半剛接合)(semi-rigid joint) 특유(特有)의 결점(缺點)도 지니고 있다. 따라서 본(本) 연구(硏究)에서는 CBA 접합(接合) 강도(强度)에 영향하는 주요(主要) 설계(設計) 인자(因子)로서 side rail 규격, corner block의 side rail에의 부착시(時) 보강재(補强材)의 효과(效果) 및 corner block관통 anchor bolt의 사용(使用) 수(數) 그리고 corner block의 형태등(等)의 평가(評價)를 하기 위해 22개(個)의 접합군(接合群) 별(別)로 총(總) 88개(個)의 table section 시험체(試驗體)를 제작(製作)한 후(後)그들의 강성(剛性) 계수(係數)(Z - 값) 및 유효강도(有效强度)를 수평 하중(荷重)에 의한 변형측정(變形測定) 실험(實驗)을 통해 결정(決定)한 후 설계(設計) 인자별(因子別) 효과(效果)를 비교 분석(分析)하였다. 분석결과(分析結果), side rail의 높이 증대(增大) 및 corner block 부착시(時) PVAc 수지(樹脂)의 사용효과(使用效果)가 뚜렷하여 유효강도(有效强度)의 유의적(有意的) 향상(向上)을 나타냈고 anchor bolt의 효과(效果) 역시 2개 사용시(使用時)가 1개 사용시(使用時) 보다 훨씬 큰 것으로 나타났다. 또 side rail 높이 와 anchor bolt 사용(使用) 수(數)간에는 상호작용(相互作用) 효과(效果)도 있었다. 그러나 side rail의 두께 효과(效果)는 22mm에서 25mm로 증대(增大)시켰을때 뚜렷한 상승 경향(傾向)은 보여주지 못했다. 한편 corner block의 형태는 MDF를 주재료(主材料)로 사용(使用)한 탁자(卓子) 설계시(設計時)는 두께 25mm, 높이 100mm의 side rail에 PVAc 수지(樹脂)로 보강(補强)하고 mitered corner block에 2개(個)의 anchor bolt를 관통시킨 경우가 유효강도(有效强度) 3171.7 kgf-cm로 22개의 접태군(接台群)들 중 최대치(最大値)를 나타냄으로써 miter type이 rectangular type보다 바람직한 것으로 나타났다. 결론적(結論的)으로 자재(資材)의 효과적(效果的) 이용(利用)을 통한 생산비(生産費) 절감(節減)과 동시(同時)에 구조(構造)의 안정(安定)된 강도적(强度的) 측면(側面)을 고려할 때, 두께 22mm, 높이 75mm의 MDF side rail에 mitered corner block을 PVAc 수지(樹脂)와 나사못을 이용하여 부착한 후(後) 2개(個)의 anchor bolt를 관통시키는 방법(方法)을 가장 합리적(合理的)인 MDF 사용(使用) 조립시(組立式) 탁자(卓子) 설계(設計) 방안(方案)으로 제시(提示)하는 바이다.