• Korean Journal of Food Science and Technology
• /
• v.33 no.3
• /
• pp.313-318
• /
• 2001

Physicochemical properties of starch vermicelli (Dangmyun) made with different starches in laboratory were determined to develop a modified corn starch comparable to sweet potato starch which is highly expensive than corn starch but commonly used for starch vermicelli in Korea. Initial temperatures (Ti) of gelatinization of starch vermicelli made in laboratory measured by differential scanning calorimeter, which were above $60^{\circ}C$, were higher than those of starch vermicelli in the market. Their X-ray diffraction peaks were relatively sharp compared with those of starch vermicelli in the market, which showed that starches were not completely gelatinized during the process of starch vermicelli preparation in laboratory. Initial temperature (Ti) of corn starch vermicelli was decreased by $3^{\circ}C$ by hydroxypropylation but increased by $2.5^{\circ}C$ by oxidation. Hardness and compression slope of sweet potato starch vermicelli and mungbean starch vermicelli, which were $11,726{\sim}12,555\;g/cm^2$ and $29,914{\sim}30,604\;g/cm^2$, respectively, were the highest in the samples and those of waxy corn starch were lowest. Hardness and compression slope of starch vermicelli made with corn starch slightly oxidized in the concentration of 0.5% NaOCl at pH 9.0, $40^{\circ}C$ for 30 min. increased and found to be comparable to those of sweet potato starch vermicelli.

• Microbiology and Biotechnology Letters
• /
• v.14 no.5
• /
• pp.399-405
• /
• 1986

Corn starch was saccharified without cooking in an agitated bead reaction system. Uncooked corn starch was effectively hydrolyzed even at the concentration as high as 39%(w/v). After 24 hours. the extent of saccharification reached at 92%, which corresponds glucose concentration of 425g/L. Fed-batch feeding of starch was more effective than batch feeding for saccharification of uncooked corn starch. The composition of hydrolysated of uncooked starch was analyzed. which was composed of 95% glucose, 0.7% of maltose, and 4.5% of high saccharide, similar with that of cooked starch. The hydrolysate can be successfully utilized for HFCS manufacture. The starch liquefying and saccharifying enzyme was relatively stable even be the physical impact of the attrition-milling media. The enzyme stabilizer, $Ca^{++}$, played an essential role in preventing the enzyme deactivation caused by the physical impact.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.8
• /
• pp.1193-1199
• /
• 2003

As a result of resistant starch yield depending on heating temperature, moisture content, storage temperature and heating-cooling cycle with RSM (response surface methodology), high amylose corn starch (46%) was appeared higher than normal corn starch in the yield (22%). At the high amylose corn starch, optimum conditions for resistant starch formation were 6 times of heating-cooling cycle, 108$^{\circ}C$ heating temperature and 67% moisture content at the 2$0^{\circ}C$ storage temperature, which resulted in 25% yield with these experiment conditions. Affecting factor for the resistant starch formation was arranged according to heating -cooling cycle, moisture content, heating temperature and storage temperature. Raw corn starch granule was destructive and appeared a porous reticular structure by the resistant starch formation. Color became dark and increased yellowness by caramelization during heating processing. Heating-cooling processing was the result of decreased hardness, cohesiveness, springiness and gumminess.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.175-182
• /
• 1991

Hydroxypropylated starches were prepared by reaction of corn starch with propylene oxide and their physicochemical properties were compared with those of the native starch. Swelling power, solubility and water binding capacity increased with the increase of hydroxypropylation. The hydroxypropylation of corn starch significantly reduced the extent of digestion and iodine absorption. Starch molecules larger than $1.34{\times}10^7{\sim}$ decreased whereas molecules ranging from $1.34{\times}10^7{\sim}1.18{\times}10^5$ increased by hydroxypropylation. Granule size increased by hydroxypropylation but this did not significantly affect the granule surface appearance by SEM. The hydroxypropylation improved the solubility and water binding capacity of corn starch.

• Korean Journal of Food Science and Technology
• /
• v.24 no.1
• /
• pp.54-58
• /
• 1992

The reological properties of commercial corn starch solutions at various concentrations($4{\sim}9%$) and temperatures($30{\sim}60^{\circ}C$) were investigated. The rheological behavior of corn starch solutions was illustrated by Herschel-Bulkley equation and exhibited pseudoplastic behavior with yield stress. The degree of pseudoplasticity of starch solution increased as the starch concentration increased but was independent on temperature. Apparent viscosity and yield stress of starch solutions were exponentially dependent on concentration and temperature. The critical concentrations for sol-gel transition and for the onset of close-packing of the starch granules were $6.22{\sim}6.52%\;and\;2.68{\sim}2.78%$ respectively.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.2
• /
• pp.30-39
• /
• 1998

Effect of cationic starches and anionic colloidal silica on retention and drainage characteristics of Compozil system was investigated. Depending upon the degree of substitution and molecular weight of cationic starches and morphological characteristics of anionic colloidal silica, retention and drainage properties of Compozil system were significantly influenced. When cationic starch addition level increased above a certain limit retention and stock freeness were decreased. To elucidate this an electrostatic coagulation mechanism occurring between unadsorbed starch molecules and anionic colloidal silica was proposed. Unstructured colloidal silica showed greater improvement in retention than structured colloidal silica. Cationic corn starches with different degree of substitution and molecular weights were prepared and their effect as a constituent of Compozil system was also evaluated. By controlling the molecular weight and degree of substitution of cationic corn starch it was possible to achieve significant improvement in fines retention. Cationic corn starch with higher degree of substitution maintained its retention efficiency even when the stock conductivity was increased. Turbidity measurement technique was found to be a simple and useful method to measure the retention characteristics.

• Microbiology and Biotechnology Letters
• /
• v.20 no.4
• /
• pp.437-444
• /
• 1992

An innovative process for high fructose corn syrup (HFCS) production coupled with direct saccharification of raw corn starch in the agitated bead enzyme reactor (bioattitor) was investigated. The required high concentration/purity of glucose solution suitable for isomerization was produced directly in a bioattritor. without condensation of hydrolyzate, 398 g glucose/$\ell$ and 98% glucose content from 400 g/$\ell$ (w/v) of raw corn starch after 24 hours. The unsaccharified residual starch could be separated easily upon centrifugation, and resaccharified. The obtained solution also possessed other desirable requirements as substrate for isomerization, such as. low concentrations of denatured protein and calcium ions, thereby, simplified the purification step. The obtained glucose solution was isomerized in an enzyme reactor paked with immobilized glucose isomerase to evaluate the suitability as a substrate. The proposed new HFCS process seems to have many advantages over the conventional process via liquefaction-saccharification steps. The follow-up investigations of the proposed process need to be conducted to evaluate the feasibility of industrial application.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.3
• /
• pp.419-427
• /
• 2010

The focus of the current study was to investigate the physicochemical properties of a corn starch-sponge matrix prepared at a low concentration below gel forming by freeze-drying. The effect of variables(starch concentration, heating temperature, and heating hold time) on the physicochemical properties of the samples was analyzed by response-surface methodology. Regression models on the properties of samples such as hardness, springiness, and water solubility index(WSI) showed high correlation coefficients(r>0.95) and significant F values, but regression models for the other properties(swelling power, apparent viscosity, reducing sugar content, and digestibility) showed them to have relatively low significance. Sample hardness of sample showed the highest value at condition of $90^{\circ}C$ and 5%, whereas springiness was at a maximum at $130^{\circ}C$ and 5%. Also, at 1% of starch concentration, mechanical properties were greatly decreased as the relative humidity increased, compared with the 3% and 5%, especially in the hardness of samples. The WSI showed an increasing trend with heating temperature regardless of starch concentration. Overall, the physicochemical properties of freeze-dried corn starch-sponge matrix were influenced much more by starch concentration and heating temperature than by heating hold time. The results of this study show that the basic properties of freeze-dried corn starch-sponge matrix can be used for the specific food applications or as a functional material for its stability.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.514-520
• /
• 1996

The purpose of this study was to develop the production technology of modified starch. Corn starches were gamma irradiated at 0-110 kGy and the effect of irradiation dose levels on the physicochemical properties of corn starches were investigated. Blue value linearly decreased, while alkali number and solubility markedly increased as irradiation dose levels were increased. The optical transmittance increased as applied irradiation dose levels were increased in the temperature range of $65-95^{\circ}C.$ Water binding capacity and swelling power showed maximum value at 30 and 10 kGy, respectively and they tended to decrease thereafter. Gelatinization viscosity of the gamma irradiated starch considerably decreased as compared to that of the non-irradiated starch. Irradiation at 110kGy resulted in a marked reduction of peak viscosity and cooling viscosity at $30^{\circ}C$ by 100 and 300 times, respectively. The physicochemical properties of corn starch irradiated at 30 kGy were similar to those of commercial acid-modified starch, while those of corn starch irradiated at 100 kGy were similar to those if oxidized starch.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.6
• /
• pp.591-596
• /
• 2000

The effect of starches such as potato, corn and wheat starch on the rheological properties of ocean jumbo squid kamaboko was investigated. Changes in the water holding capacity and color values of those kamaboko gels was also studied using the maximum gel strength endowing starch, Wheat starch could ive the better water holding capacity and breaking stress than potato or corn starch within $10{\%}$ additional level but corn starch resulted the highest those value at $20{\%}$ added. Wheat starch had higher level of breaking strain and jelly strength at $10{\%}$ then in descending order were corn starch, potato starch. But those starches were decreased after $15{\%}$ level. Texture map showed the simple rheological properties of each starches heat gel with jumbo squid kamaboko, Corn starch map showed more tough and brittle than the other. Potato starch map showed more elastic gel than corn starch. Wheat starch map could make elastic-mushy gel. There was no significant color differences of each starches but the whiteness of each starch showed increase when the starch rate was increased.