• Preventive Nutrition and Food Science
• /
• v.19 no.2
• /
• pp.124-127
• /
• 2014

The effect of feed moisture contents (30%, 40%, and 50%) and screw speed (200 rpm, 250 rpm, and 300 rpm) on the corn fiber gum (CFG) yield and soluble arabinoxylans (SAX) content of destarched corn fiber was investigated. The CFG yields and SAX contents of extruded, destarched corn fiber were higher than that of destarched corn fiber. In extruded, destarched corn fiber, increased screw speed and decreased feed moisture contents resulted in a higher SAX contents. The maximum yields of CFG obtained from extruded, destarched corn fiber were $79.1{\pm}19.0g/kg$ (30% feed moisture content) and $82.3{\pm}11.30g/kg$ (300 rpm screw speed). The highest SAX content was also observed at a screw speed of 300 rpm. The results of the present study show that water extraction and extrusion combined have the potential to increase CFG and SAX yields from corn fiber.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.694-699
• /
• 2005

The aim of this study was to develop muffins in which corn bran fiber was substituted 10, 30, 50 or $70\%$ for fat and the quality characteristics were compared with a full-fat counterpart. The volume and height of muffin was highest in control and decreased with increasing corn bran fiber content, but no difference in weight was observed (p<0.05). The incorporation of corn bran fiber in the product lowered lightness and redness values but decreased yellowness values. The mechanical texture parameters including hardness, springiness, gumminess and brittleness increased with increasing corn bran fiber levels. Scanning electron microscope showed that the size of air cells was decreased with increasing corn bran fiber levels. Sensory analysis yielded muffin with $30\%$ substitution of butter with corn bran fiber was considered to be as acceptable as control.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.8
• /
• pp.1290-1295
• /
• 2013

The aim of this study was to evaluate the quality characteristics of bread supplemented with extruded corn fiber. The extrusion was conducted as the moisture content of the corn fiber reached 30% and 40% (at $140^{\circ}C$ and 200 rpm). The bread baked with 5% extruded corn fiber at a 40% feed moisture exhibited the highest specific volume. The hardness of the bread supplemented with 10% corn fiber was the highest during storage compared to bread supplemented with extruded corn fiber and the control (100% wheat flour). However, the hardness of bread with corn fiber or extruded corn fiber (5%) was lower than the control. In the sensory evaluation, preferences decreased with the increased addition of untreated and extruded corn fiber. Quality characteristics, such as specific volume and texture, of bread baked with extruded corn fiber were better than bread baked with corn fiber. This improvement in quality is likely due to modification of corn fibers and starch gelatinization from the extrusion process. Supplement of extruded corn fiber had the potential for bread making compared to raw corn fiber.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.427-433
• /
• 2013

This study was designed to examine changes in the physicochemical properties of extruded corn fibers with different amounts of feed moisture (30, 40, and 50%). The screw speed and die temperature were fixed to 200 rpm and $140^{\circ}C$, respectively. The crude ash, fat, and protein in corn fiber decreased from the extrusion process. The insoluble dietary fiber in corn fibers decreased, while soluble dietary fiber increased at a feed moisture of 30%. The specific length of the extruded corn fiber increased while the specific mechanical energy input, density, breaking strength, and elastic modulus decreased. The water absorption index (WAI) and reducing sugar content of the corn fibers did not significantly change, but the water soluble index (WSI) decreased as the feed moisture content of the corn fiber increased. On the other hand, the WAI of de-starched corn fiber decreased while WSI and reducing sugars increased as the feed moisture content of the corn fiber increased.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.2
• /
• pp.128-134
• /
• 1988

This experiment was carried out to compare chemical composition of corn-cowpea inter cropping and corn monocropping plants at different harvestion time and obtained the following results. 1. In both cropping systems, the contents of crude fat and nitrogen free extract (NFE) were significantly increased (P<0.01), while that of crude protein crude fiber and crude ash were decreased (P<0.01) with each harvesting time. 2. The acid detergent fiber (ADF) and crude fiber contents were decreased same patterns in growing period, however, according to maturing of corn ears the difference between ADF and crude fiber contents reduced. 3. At mature stage, crude protein yields per 10a in corn monocropping and corn-cowpea intercropping system were 127.6kg and 152.1kg, respectively. The difference of crude protein content between corn-cowpea intercropping and corn monocropping system was 19.2%. 4. TDN yields of each cropping system, at mature stage, obtained similar results and TDN yields per 10a of corn monocropping and corn-cowpea intercropping system were 1006.1kg and 990.1, respectively. 5. Conseqently, corn-cowpea intercropping system could be increased protein yield without decreasing of dry matter yield in comparison with corn monocropping system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.128-134
• /
• 1988

This experiment was carried out to compare chemical composition of corn-cowpea intercropping and corn monocropping plants at different harvesting time and obtained the following results. 1. In both cropping systems, the contents of crude fat and nitrogen free extract (NFE) were significantly increased (P<0.01), while that of crude protein, crude fiber and crude ash were decreased (P<0.01) with each harvesting time. 2. The acid detergent fiber (ADF) and crude fiber contents were decreased same patterns in growing period, however, according to maturing of corn ears the difference between ADF and crude fiber contents reduced. 3. At mature stage, crude protein yields per 10a in corn monocropping and corn-cowpea intercropping system were 127.6kg and 152.lkg, respectively. The difference of crude protein content between corn-cowpea intercropping and corn monocropping system was 19.2%. 4. TDN yields of each cropping system, at mature stage, obtained similar results and TDN yields per 10a of corn monocropping and corn-cowpea intercropping system were 1006.lkg and 990.1, respectively. 5. Conseqently, corncowpea intercropping system could be increased protein yield without decreasing of dry matter yield in comparison with corn monocropping system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.61-66
• /
• 2010

Corn stalk, one of the most abundant agricultural residue in the world, was examined in this study to use it as an alternative fiber source of wood fiber. In order to find the proper way to utilize corn stalk more efficiently, the morphological properties and the papermaking properties of the, bast fibers and the corn pith, were evaluated respectively. Although the bast fiber fraction showed comparable properties to those for hardwoods in the fiber properties and the papermaking properties, the pith resulted in low brightness and low drainage rate. But the short and flexible fibers in pith fraction led to dense and compact handsheet structure, correspondingly the higher sheet strength. There big differences in properties between bast fiber and pith should be considered for the fully utilization of corn stalk.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.3
• /
• pp.379-385
• /
• 2004

Two trials in vivo and in vitro were conducted, in vivo to determine the apparent digestibility of gross energy, crude protein, dry matter, acid detergent fiber, neutral detergent fiber and apparent digestible energy in 10 corn by-products. In vivo the diets included one basal corn diet, four corn gluten meal diets, four corn distillers dried grains with solubles diets and two corn distillers dried grains diets using the different methods, 12 crossbred barrows weigh $40{\pm}$1.6 kg were allocated into individual metabolic crate, according to a $6{\times}6$ Latin square design. In vitro using flask technique, filter bag technique and dialysis tubing technique, the digestibilities of gross energy, crude protein and dry matter in corn gluten meal and corn distillers dried grains with solubles were investigated. Pepsin, pancreatin, intestinal fluid, rumen fluid and cellulase were used in incubation. The results showed that correlation coefficient was 0.73 in corn distillers dried grains with solubles between the digestibility of crude protein and acid detergent fiber in vivo (p<0.01); and correlation coefficient was 0.68 in corn distillers dried grains with solubles between the digestibility of gross energy and neutral detergent fiber in vivo (p<0.01). Apparent digestible energy (DE) of corn by-products in pig total tract was predicted by the percentage of crude protein (CP) and the content of gross energy (GE) in feedstuff. The equation: DE=5,601.09+26.69$\times$CP %-0.5904$\times$GE, ($R^2=0.72$). In vitro, filter bag technique was more convenient; furthermore, the digestibility for the treatments (pepsin+pancreatin+rumen fluid and pepsin+pancreatin+cellulase) was better.

• Animal Bioscience
• /
• v.37 no.1
• /
• pp.105-115
• /
• 2024

Objective: A study was conducted to determine the chemical composition of barley and co-products from barley, corn, and wheat produced in South-East Asia or Australia, and to test the hypothesis that production area or production methods can impact the chemical composition of wheat co-products. Methods: Samples included seven barley grains, two malt barley rootlets, one corn gluten feed, one corn gluten meal, one corn bran, eight wheat brans, one wheat mill mix, and four wheat pollards. All samples were analyzed for dry matter, gross energy, nitrogen, amino acids (AA), acid hydrolyzed ether extract, ash, minerals, starch, and insoluble dietary fiber and soluble dietary fiber. Malt barley rootlets and wheat co-products were also analyzed for sugars. Results: Chemical composition of barley, malt barley rootlets, and corn co-products were in general similar across countries. Wheat pollard had greater (p<0.05) concentrations of tryptophan, magnesium, and potassium compared with wheat bran, whereas wheat bran had greater (p<0.05) concentration of copper than wheat pollard. There were no differences in chemical composition between wheat bran produced in Australia and wheat bran produced in Thailand. Conclusion: Intact barley contains more starch, but fewer AA, than grain co-products. There were only few differences in the composition of wheat bran and wheat pollard, indicating that the two ingredients are similar, but with different names. However, corn gluten meal contains more protein and less fiber than corn bran.

• Journal of Microbiology and Biotechnology
• /
• v.34 no.2
• /
• pp.330-339
• /
• 2024

Corn cobs were fermented with Aspergillus niger to produce soluble dietary fiber (SDF) of high quality and excellent food safety. In this work, the fermentation process was optimized by single-factor test and response surface methodology (RSM). The optimal fermentation conditions were determined to be a material-liquid ratio of 1:30, an inoculum concentration of 11%, a temperature of 32℃, a time of 6 days, and a shaking speed of 200 r/min. Under these conditions, the SDF yield of corn cob increased from 2.34% to 11.92%, and the ratio of soluble dietary fiber to total dietary fiber (SDF/TDF) reached 19.08%, meeting the requirements for high-quality dietary fiber (SDF/TDF of more than 10%). Scanning electron microscopy (SEM) and Fourier-transformed infrared spectroscopy (FT-IR) analysis revealed that the fermentation effectively degraded part of cellulose and hemicellulose, resulting in the formation of a loose and porous structure. After fermentation the water swelling capacity, water-holding capacity, and oil-holding capacity of the corn cob SDF were significantly improved and the adsorption capacity of glucose, cholesterol, and nitrite ions all increased by more than 20%. Moreover, the total phenolic content increased by 20.96%, which correlated with the higher antioxidant activity of SDF. Overall, the fermentation of corn cobs by A. niger increased the yield and enhanced the functional properties of dietary fiber (DF) as well.