• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.774-775
• /
• 2015

In this paper, a series of electromagnetic analyses carried out for a high efficiency 22.9/0.38kV mold transformer are presented. The simulations were performed in order to calculate the losses which eventually verify the performance(efficiency) of the designed product. Here, losses include core loss, stray losses of non-current carrying metallic structural parts(core plate and clamp), ohmic loss and eddy current loss of current carrying metallic parts(busbars, leads, terminals and windings). The obtained results of the simulations were compared to the test results and showed high level of accuracy. The loss evaluation technology will allow designers avoid any potential over-design or under-design of the high efficiency products, reducing the manufacture cost and development period compared to the conventional experience-based design procedures.

• Smart Media Journal
• /
• v.3 no.4
• /
• pp.9-15
• /
• 2014

A virtual platform models a processor core and the peripheral devices constituting the SoC in software. Major companies utilize a variety of platforms for product development with optimal SW+SoC integrated system architecture design and IP reuse based Top-Down design flow using a virtual platform. In this paper, we propose a virtual platform based on OpenRISC, an open source RISC based core. The proposed virtual platform supports high speed emulation of approximately 20 MIPS using DBT (Dynamic Binary Translation).

• Fire Science and Engineering
• /
• v.16 no.4
• /
• pp.72-76
• /
• 2002

Nowaday, with the growth of software for electro-thermal analysis, it has been studied the precise analysis and investigation of cause for the electrical fire using computer simulation on the basis of theory for electro-thermal analysis. But it is very lacking for the precise analysis and investigation of cause for the electrical fire. In this paper, we have simulated the thermal analysis for electrical wire according to the value of current and deteriorating time in a overload and a short with the electrical wire of the L's company product(600 V VVF : Three core) using the elec-tro-thermal finite element method(Flux2D).

• Asia pacific journal of information systems
• /
• v.13 no.3
• /
• pp.41-62
• /
• 2003

This study investigated the current status and characteristics of strategic alliances attempted by domestic internet businesses. Specifically, this study surveyed competitive environmental characteristics of partner companies involved, alliance period, types of partner companies, motives of alliances, types of alliances, success and failure factors and satisfaction toward the alliances. Major findings were: first, alliances between portal companies and content producers; portal companies and internet services; e-commercial sites and internet services were the most frequent partnerships engaged. Second, the most important motive for and type of the strategic alliance were: 'the commercialization and marketing of new product' and 'joint distribution and marketing agreement' respectively. Third, the most important factor for the successful alliance was 'a close examination of partners' core business value and competence'; and the factor most hindering the successful alliance was 'a discrepancy on capabilities of partners' core personnel. Finally types of internet business were significantly related to perceived satisfaction toward strategic alliance.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.3
• /
• pp.150-158
• /
• 2009

In these days, the importance of design becomes increasing and the design aspect that customers decide to purchase products such as television, mobile phone is more important than functional one. And the progress of virtual reality technology enables us to feel the reality from the virtual prototype as the real one. In this paper, we introduce the collaboration design review system consist of MEMPHIS, CORE. We can create a realistic virtual prototype more fastly, conveniently and efficiently using MEMPHIS and carry out the design review through collaboration using CORE. As a result of this study, it would be possible that decision making can be done effectively at early stage of the design process.

• Journal of Environmental Science International
• /
• v.8 no.1
• /
• pp.125-133
• /
• 1999

Sorbents of calcined limestone and oyster particles having a diameter of about 0.63mm were exposed to simulated fuel gases containing 5000ppm $H_2S$ for temperatures ranging from 600 to 80$0^{\circ}C$ in a TGA (Thermalgravimetric analyzer). The reaction between CaO and $H_2S$ proceeds via an unreacted shrinking core mechanism. The sulfidation rate is likely to be controlled primarily by countercurrent diffusion through the product layer of calcium sulfide(CaS) formed. The kinetics of the sorption of $H_2S$ by CaO is sensitive to the reaction temperature and particle size, and the reaction rate of oyster was faster than the calcined limestone.

• IE interfaces
• /
• v.13 no.4
• /
• pp.591-598
• /
• 2000

In this paper, an efficient algorithm is proposed to find parting lines(PL) and generate parting surfaces(PS) for an injection mold design. We used a Face-Edge Graph which can be made by B-rep information of solid model. The graph is useful for finding the peripheral-loop edges for PL and the inner-loop edges for hole-patch. The PS can be generated automatically by selecting pre-defined direction lines. We can create a core and cavity molds by trimming the raw stock block with the PS and the upper/lower faces of a product model. We implemented proposed method with Unigraphics API functions and C language, and tesed on Unigraphics V15.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.160-161
• /
• 2006

Seasonal changes have been recognized in particle characteristics and forming characteristics of iron powder with insulated coating for a compacted magnetic core because of its high hygroscopicity, due to its phosphate coating and resin binder additives. For this reason, particle characteristics and molding characteristics of the powder with diverse water absorbtivity have been studied. The result shows that the higher the volume of absorbed water, the worse the fluidity becomes, resulting in the reduction in both springback during the molding process and expansion reduction after the heat treatment. The requirement on dimension accuracy for the finished product can be satisfied with an additional drying process on the material powder, which contributes to maintain its water volume constant.

• Elastomers and Composites
• /
• v.55 no.4
• /
• pp.277-280
• /
• 2020

In this study, mesoporous hollow silica spheres were synthesized using a polystyrene core and cetyltriammonium chloride (CTACl) as a pore template, and a low-cost water glass instead of expensive tetraethyl orthosilicate (TEOS) as a precursor. In addition, the material was synthesized by varying the concentration of polystyrene. Later, the polystyrene core and CTACl were removed by firing in a high-temperature heat-treatment process. The synthesized product was analyzed by various methods, such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), and N2-sorption analysis. It was confirmed that the hollow silica sphere had a hexagonal structure with a Brunauer-Emmett-Teller (BET) specific area of 1623 ㎡/g.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.63-72
• /
• 2006

The design in modern industrial society is the core of corporate administrational strategy and a factor that determines the competitiveness of a country. And the process of purchasing products is the matter related to the awareness of design which expresses the desire to own the design product that consumers prefer, implying that the aesthetic feature of product has become a critical characteristics of product design rather than the technical function of product. In this regard, the development of product design with a new dimension is urgently called for, by analyzing and shedding light on the aesthetic features of factors related to the preference of consumers. This study considers the preceding studies on the aesthetic factors and the reaction of customers to the product design to figure out the importance of factors related to the preference of customers, in an effort to shed light on the aesthetic factors that affect the customers' preference of product and the evaluation of product. In addition to that, this study investigated the preference that Korean and Chinese customers display toward the product and assessed the aesthetic features of preferred product in order to come to the conclusion from the experiment and analysis on how much effect the aesthetic factors and the aesthetic factors by product have on the preference of customers. Therefore, this study tries to propose the data that can be useful for the design of product targeted for consumers in Korea and China, by shedding light on what aesthetic factors that products preferred by consumers in Korea and China have and how much effect such factors have on the preference of consumers in an attempt to provide the guideline on the aesthetic factors of the product design.