• 산업경영시스템학회지
• /
• 제35권2호
• /
• pp.147-154
• /
• 2012

In the manufacturing industry, fostering talented workers has become a core activity as well as an important resource leading to manufacturing enterprises' innovative activities, which has come to the fore as one of the biggest success factors for innovative activities indeed. In other countries, there are many researches actively conducted on talent-fostering programs related to manufacture innovation. In Korea, however, manufacturers or several different education agencies don't actively carry out manufacture innovation instructions and have failed to faster special competent workers since their instructions focus on theories most of the time. Therefore, this study was conducted to understand the present conditions of manufacture-innovative instructions in Korea by classifying them in a method of educational technology and to investigate various teaching methods through oversea cases and cases from non-manufacture fields so that it might make a proposal for a better manufacture-innovative instruction method.

• Design & Manufacturing
• /
• 제1권1호
• /
• pp.51-56
• /
• 2007

As various manufacturing technology of optical glass is developed, the aspheric lenses are supplied to many fields. Electronic or measuring instruments equipped with aspheric lens have recently been used since aspheric lens is more effective than spheric one. However, it is still difficult manufacture glass lens because of high cost and the short life of core. The demands of the aspheric glass lenses increase since it is difficult to obtain the desirable performance in the plastic lens. For the mass production of aspheric lens, specific molds with precisely machined cores should be prepared. In order to obtain competitiveness in the field of industrial manufacturing, a reduction in the development period for the batch machining of products is required. It is essential to analyze the stress distribution and deformations of machining system which is used for manufacturing the aspheric lens using FEM software ANSYS. Finite element simulations have been performed in order to study the influence of machining system which is developed in this study on structures. It is very important to understand the structural behavior of machining system. This paper investigated the static analysis and dynamic analysis of machining system for aspheric lens to predict the damage due to loading.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.20.2-20.2
• /
• 2010

Recently inkjet printing technology has been developed in the areas of low cost fabrication in environmentally friendly manufacturing processes. Although inkjet printing requires the interdisciplinary researches including development of materials, manufacturing processes and printing equipment and peripherals, manufacturing a printhead is still core of inkjet technology. In this study, a piezoelectric driven DOD (drop on demand) inkjet printhead has been fabricated on three layers of the silicon wafer in MEMS Technology because of its chemical resistance to industrial inks, strong mechanical properties and dimensional accuracy to meet the drop volume uniformity in printed electronics and display industries. The flow passage, filter and nozzles are precisely etched on the layers of the silicon wafers and assembled through silicon fusion bonding without additional adhesives. The piezoelectric is screen-printed on the top the pressure chamber and the nozzle plate surface is treated with non-wetting coating for jetting fluids. Printheads with nozzle number of 16 to 256 have been developed to get the drop volume range from 5 pL to 80 pL in various industrial applications. Currently our printheads are successfully utilized to fabricating color-filters and PI alignment layers in LCD Flat Panel Display and legend marking for PCB in Samsung Electronics.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.516-524
• /
• 2012

Selective Laser Sintering(SLS) system consists of various element technologies. Main components of the system include a position control system, a speed control system of the roller, and nitrogen atmosphere furtherance for the powdered sintering. Other systems which make the core of the SLS system are build room and the feed room for powder epitaxial, a temperature control system, and a scan path generator for the laser. The powder material for laser sintering is necessary to produce prototypes in Solid Freeform Fabrication(SFF) based on SLS process. This powder material is sintered in powder room using $CO_2$ laser after spreading evenly using roller to reproduce mold via SFF. This study addresses an SFF system by using the SLS process which applies single laser system to enable manufacturing of 3D shape. And to evaluate applicability of the single laser system, experiments were conducted with optimal fabricating process.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.40-45
• /
• 2012

The glass edge sealing is one of the vacuum glazing core manufacturing process and it needs the high reliability for the vacuum keeping. Conventionally, the glass edge sealing had been being researched by the method that pasted the flit on the glass edge part and bonded two sheets of glass. But this way has the defect that can't make tempered glass. In order to remedy it's faults, in this paper, the glass edge was sealed by using the hydrogen mixture gas torch within the furnace. The parameter having an effect on the glass edge sealing through the basic test was set. And the correlation of the thickness of the glass edge and parameter were analyzed through the design of experiment. By using the Taguchi method, the optimal process condition for the glass edge sealing was drawn and the validity was verified.

• 기술혁신학회지
• /
• 제7권3호
• /
• pp.641-656
• /
• 2004

L Company is producing the second sept pin, Shadow Mask which is the chief part of CRT in W, Monitor. Inside of the CRT pan, Shadow Mask leads the electronic beam to express the three primary colors; red, green, blue, and it is the core part to embody the colors. In the etching process, it produces this part with manufacturing by eroding the iron chloride. Even though the iron chloride is harmless to human body. it is necessary to diminish the amount of it on the view of preservation of environment. In addition, by studying the method of the dispossed liquid process, cutting down the manufacturing cost is a necessary task on the aspect of reconsideration of competitive business. This study shows the case that through the six sigma innovation activity, it reforms the following the former processing flow, and it reduces the amount of it by improving the efficiency of the iron chloride. By rationalization of the standard requirement cooperative company, it could cut down the manufacturing cost in the cooperative company, so it could promote the common profits.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.4-5
• /
• 2019

With recent advances in computer technology, the ratio of free-form building designs to those of the past is increasing gradually. However, the current technology of free-form structure is very low. The core technology for free-form building implementation is the manufacturing technology of FCP (Free-form Concrete Panel), which indicates an unformed outside, and through the development of FCP manufacturing technology, the construction technology of free-form architecture can be enhanced. The inside and outside of an free-form building should be represented by the designer's intended curvature, and the panel's thickness by segment should be constant. For this reason, the technology that keeps the thickness of panels constant during the FCP production process is a key technology that can improve the quality of FCP. In this study, a basic study on ways to maintain a constant thickness of FCP is conducted.

• 한국기계가공학회지
• /
• 제21권3호
• /
• pp.36-42
• /
• 2022

Whereas the necessity for recycling and reuse is being emphasized owing to the depletion of resources and waste disposal problems caused by the continuous development of the industry, the importance of remanufacturing has been highlighted recently. Re-manufacturing involves a series of processes in which failed disposal or aging goods are recovered to a state similar to that of a new product. In this regard, machine tools, which are large structures, can achieve the effect of remanufacturing. Among the various elements constituting the machine tool, the main spindle portion that affects the processing precision is critical. Therefore, this study is conducted to derive improvement measures for the main axis of an old Miller planner via reverse engineering and central composite design, which is one of the core processes of remanufacturing.

• 전자공학회지
• /
• 제15권1호
• /
• pp.114-121
• /
• 1988

The advent of microprocessor controls and robotics is rapidly changing the face of manufacturing throughout the world. Large and small companies alike are adopting these new methods to improve the efficiency of their operations. Factory Automation, which is in reality by robots, is playing more important role in economic competition and growth. Its core technology, i.e. robotics, is advanced in accordance with the remarkable progress of the computer technology and micro-electronics. Roughly speaking, its future might determine the fate of a national economy. In this paper, the future trends of such robotics and factory automation are described from a point of view of industrial application.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.653-658
• /
• 2000

For testing machine tools, we used test the work by measure of 3-D object that it was made by the machine tool. By reason of these, we have spent to the cost of measure and have delayed supply to user. In this study, we made a macro-program and a application program in order to test automatic the machine tool. So, if you constitute a ring core and a touch prove in machine tool, you should test the property of machine tool.