• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.93-100
• /
• 2004

Test scheduling of SoC (System-on-a-chip) is very important because it is one of the prime methods to minimize the testing time under limited power consumption of SoC. In this paper, a heuristic algorithm, in which test resources are selected for groups and arranged based on the size of product of power dissipation and test time together with total power consumption in core-based SoC is proposed. We select test resource groups which has maximum power consumption but does not exceed the constrained power consumption and make the testing time slot of resources in the test resource group to be aligned at the initial position in test space to minimize the idling test time of test resources. The efficiency of proposed algorithm is confirmed by experiment using ITC02 benchmarks.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1851-1853
• /
• 2006

We herein report a new analytical application of XPS to the identification of organic molecules in room temperature ionic liquid for the first time. An organic compound, propargylamine (1), produced in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][$PF_6$]), which is one of the room temperature ionic liquids (RTILs), via $A^3$ coupling reaction, is characterized by means of x-ray photoelectron spectroscopy (XPS) rather than using conventional organic compound analysis techniques. There are four non-equivalent carbons in RTILs and 1 each. The ratios of normalized integrated areas of the deconvoluted binding energy of core electron of carbon (C1s) peaks are well matched to the number of carbons in those compounds. The binding energies of C1s of the featured carbons in 1, C4 (sp carbons in acetylene group) and C5 ($sp^2$ carbons in benzene ring), are assigned 286.2 and 285.4 eV, respectively. These results will be able to provide an important tool and a new strategy for the analysis of organic molecules

• Nuclear Engineering and Technology
• /
• v.13 no.2
• /
• pp.73-84
• /
• 1981

B$\Phi$rrensen proposed a coarse mesh, three-dimensional one-and-half group diffusion scheme for computing the gross power distribution in light water reactors as an alternative to the conventional fine mesh finite difference approach in dealing with three dimensional problems, which require a prohibitively long computing time. The method reported takes extremely small execution time. However, its computational accuracy has not been investigated yet. The B$\Phi$rrensen method is revised in this work and both efficiency and accuracy are examined by applying it to IAEA benchmark problem and RIS$\Phi$ benchmark problem. It is found that two modifications on core-reflector boundary conditions and B$\Phi$rrensen's model constants may improve computational accuracy of power distribution calculation.

• Perspectives in Nursing Science
• /
• v.8 no.2
• /
• pp.86-96
• /
• 2011

Purpose: This study examined the effects of simulation-based education on knowledge about and self-confidence in maternity nursing care in senior students. Methods: One group, pre-post design, was utilized with 28 students. The simulation-based maternity nursing education that consisted of two sessions each 2 hours long for intrapartum and postpartum care was provided to 4 small groups. An expert panel of 3 maternity clinical instructors developed the module with a high-fidelity maternal simulator. Core items of knowledge about and self-confidence in maternity nursing care were measured with 13 items before and after the sessions. Results: The knowledge score did not increase significantly (z=-1.95, p=.05); however, self-confidence in maternity nursing care showed a significant change in the posttest (z=-2.82, p<.001). The subjective evaluation of the students indicated that the simulation-based education was helpful in preparing for clinical practicum as far as interaction with clients, psychological readiness to practice, and learning efficiencies. Conclusion: The simulation-based nursing education was useful in improving self-confidence in clinical performance for childbirth and postpartum care in nursing students. Along with the application of diverse scenarios in simulations, modules with standard patients and role-plays are also recommended for maternity nursing practicum to empower the competency of the students.

• Journal of Hydrogen and New Energy
• /
• v.21 no.5
• /
• pp.470-477
• /
• 2010

The IGCC (Integrated gasification combined cycle) is known for one of the highest efficiency and the lowest emitting coal fueled power generating technologies. As the core technology of this system is the gasifier to make the efficiency and the continuous operation time increase, the research about different coal's gasification has been conducted. Our research group had set-up the coal gasifier for the pilot test to study the effect of different coals-Shenhua and Adaro coal- on gasification characteristics. Gasification conditions like temperature and pressure were controlled at a fixed condition and coal feed rate was also controlled 30 kg/h to retain the constant experimental condition. Through this study we found effects of coal composition and $O_2$/coal ratio on the cold gas efficiency, carbon conversion rate. The compounds of coal like carbon and ash make the performance of gasifier change. And carbon conversion rate was decreased with reduced $O_2$/coal ratio. The optical $O_2$/coal ratio is 0.8 for the highest cold gas efficiency approximately. At those operating conditions, the higher coal has the C/H ratio, the lower syn-gas has the $H_2$/CO ratio.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.1-4
• /
• 2009

Construction automation and robotics are being introduced as an efficient alternative to overcome troubles caused by lack of skilled labors. To accomplish effective automated construction system, design for automation(DFA) should be performed in parallel with the development of core technologies such as control and sensing of robots. In Korea, the development of robotic crane-based construction automation(RCA) system is progressing, and the research group has recently developed newly designed steel joint to improve the efficiency of the system. However, performance of the new system should be examined prior to its application on construction sites. Therefore, This study analyzed performance of the new steel frame focused on its constructibility by carrying out mock-up test. As a result, the steel frame satisfied the standards of allowable stress and deflection. It also enables to reduce the time for installation.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.6 s.61
• /
• pp.96-100
• /
• 2004

Inconel 625 is useful in a variety of industrial applications because of the resistance to attack in various corrosive media at temperatures from $200^{\circ}C$ to over $1090^{\circ}C$, in combination with good low and high temperature mechanical strength. Rencently this material has also been widely used in offshore processing piping in order to extend the maintenance term and improve the quality of anti-corrosion. In general, high quality weldings for this material are readily produced by commonly used processes. How, not all processes are applicable to this material group of Ni-alloys. Metallurgical or the unavailability of matching, position or suitable welding processes produce a lower quality. Nowadays, the flux cored wire is developed and applied for increased productivity in several welding positions, including the vertical position. In this study, the weldability and weldment characteristics(mechanical properties) of inconel 625 are considered in FCAW(Flux Core Arc Welding) associated with the several shielding gases$(80\%Ar+20\%CO2,\;50\%Ar+50CO2,\;100CO2)$ in view of welding productivity.

• Journal of Korean Society of Rural Planning
• /
• v.15 no.3
• /
• pp.107-112
• /
• 2009

In Japan, the direct payment scheme for mountainous areas was introduced in order to enhance multifunctionality of less-favored areas in 2000. A comprehensive ex post assessment showed that the scheme effectively contributed to prevention of abandoned cultivated lands, maintenance and enhancement of multifunctionality of agriculture, continuous assistance for agricultural production, and revitalization of community. In 2005 a second round of the scheme started and urged encouraging core farmers, improving productivity, and reinforcing inter-village coalition as to promote autonomous and sustainable rural economies. A new different scheme such as 'measures to conserve and improve land, water and environment' was launched for strengthening conservation and management of rural resources over all areas in 2007. It covers one third of paddy fields with regards to maintenance of water facilities and practice of group eco-farming beyond less-favored area. A lot of public programs have been developed for rural revitalization recently. Additionally some have a complementary role to enlarging cultural multifunctionality in rural societies. We could interpret the institutional progress as an evolutionary path of rural development and environmental schemes for the past decade. Much experience of community works through the direct payment scheme for mountainous areas may have resulted in accumulation of social competence for elaboration of rural management..

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.304-317
• /
• 2016

An accelerator-driven system consists of a subcritical reactor and a controllable external neutron source. The reactor in an accelerator-driven system can sustain fission reactions in a subcritical state using an external neutron source, which is an intrinsic safety feature of the system. The system can provide efficient transmutations of nuclear wastes such as minor actinides and long-lived fission products and generate electricity. Recently at Kyoto University Research Reactor Institute (KURRI; Kyoto, Japan), a series of reactor physics experiments was conducted with the Kyoto University Critical Assembly and a Cockcrofte-Walton type accelerator, which generates the external neutron source by deuteriu-metritium reactions. In this paper, neutronic analyses of a series of experiments have been re-estimated by using the latest Monte Carlo code and nuclear data libraries. This feasibility study is presented through the comparison of Monte Carlo simulation results with measurements.

• Food Science of Animal Resources
• /
• v.29 no.6
• /
• pp.673-679
• /
• 2009

To develop ready-to-eat (RTE) style Korean traditional Galbi-jjim, the optimal conditions for sous-vide cooking and cookchill preparation and the sensory properties of the cooked products were investigated. During heating, the meat core temperatures reached $85^{\circ}C$ within 30 min and 45 min when a water bath and combination oven were used, respectively. Chilling to $3^{\circ}C$ within 45 min was conducted to meet the standards for microbiological safety set by the UK Department of Health and Social Security (DHSS) Guideline. Galbi-jjim that was vacuum-cooked in a water bath was much more tender than that of Galbi-jjim prepared using the cook-chill method, but had no difference in any reheating methods. The average sensory scores of juiciness and the overall acceptance of Galbi-jjim were significantly higher when water bath cooking was used, and there were no differences in reheating methods. In conclusion, the serial methods of sous-vide processing and rapid chilling can be applied to produce RTE traditional Galbi-jjim, and this can be conducted while meeting the standards specified in safety guidelines.