• Environmental Engineering Research
• /
• v.15 no.1
• /
• pp.35-40
• /
• 2010

Bung Boraphet is the largest freshwater reservoir in Thailand. This study examined the accumulation of copper (Cu) and lead (Pb) in water, sediment and tissues of Asian clams (Corbicula sp.) within Bung Boraphet to assess the possible polluting effect of soil erosion and the dissolution of water soluble salts from the Nan River. Samples were collected from 12 study sites within Bung Boraphet between February and December 2008. The physicochemical parameters of the water including temperature, pH, turbidity, ammonia nitrogen, nitrate nitrogen, orthophosphates, biochemical oxygen demand, dissolved oxygen, Cu, and Pb were measured. The water in Bung Boraphet was found to be medium clean according to the surface water quality standard of Thailand. The levels of Cu and Pb in the water were low but heavy metals were detected at higher levels in the sediment and tissues of Corbicula sp. In the near future, management practices and regulator approaches for Cu and Pb contamination will be needed to protect the water in Bung Boraphet.

• Progress in Superconductivity
• /
• v.13 no.2
• /
• pp.127-132
• /
• 2011

Many research groups have been manufacturing coated conductor by various processes such as PLD, MOD, and MOCVD, but the methods with production cost suitable for wide and massive application of coated conductor did not develop yet. Spray pyrolysis method adopting ultrasonic atomization was tried as one of the possible option. GdBCO precursor films have been deposited on IBAD substrate by spray pyrolysis method at low temperature and converted to GdBCO by post heat treatment. Ultrasonic atomization was used to generate fine droplets from precursor solution of Gd, Ba, and Cu nitrate dissolved in water. Primary GdBCO films were deposited at $500^{\circ}C$ and oxygen partial pressure of 1 torr. After that, the films were converted at various temperatures and low oxygen partial pressures. C-Axis oriented films were obtained IBAD substrates at conversion temperature of around $870^{\circ}C$ and oxygen partial pressures of 500 mtorr ~ 1 torr in a vacuum. Thick c-axis epitaxial film with the thickness of 0.4 ~ 0.5 ${\mu}m$ was obtained on IBAD substrate. C-axis epitaxial GdBCO films were successfully prepared by ex-situ methods using nitrate precursors on IBAD metal substrate. Converted GdBCO films have very dense microstructures with good grain connectivity. EDS composition analysis of the film showed a number of Cu-rich phase in surface. The precursor solution having high copper concent with the composition of Gd : Ba : Cu = 1 : 2 : 4 showed the better grain connectivity and electrical conductivity.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.612-621
• /
• 2018

In this study, $TiO_2$ nanotube plate and metal electrodes(Copper, Nickel, Stainless Steel, Aluminum, Tin, Titanium) were compared on cathodic reduction of nitrate ($NO_3{^-}-N$) during electrolysis. The electrochemical characteristics were compared based on electrochemical impedance spectroscopy (EIS). The surface morphology was obtained using scanning electron microscopy (SEM) method. Brunauer-Emmett-Teller (BET) method was implemented for the specific surface area analysis of the cathodes. To study kinetics, 90 minute batch electrolysis of nitrate solution was performed for each cathodes. In conclusion, under the condition of relatively low ($0.04 A\;cm^{-2}$) current density, $TiO_2$ nanotube plate showed no surface corrosion during the electrolysis, and the reaction rate was measured the highest in the kinetic analysis.

• Asian Journal of Turfgrass Science
• /
• v.11 no.2
• /
• pp.89-95
• /
• 1997

Soil chemical properties were investigated to elucidate vertical movement of mineral nutrients in a fairway slope of 27 year-old golf course. Soil samples were taken at every 10cm depth to 4Ocm on 4 sites 20m apart each along two parallel lines 60m apart on the slope(15˚) in August. Accord-ing to the similarity of vertical distribution pattern they could be classified into 6 distinctive groups(magnesium, nitrate, phosphorus, ammonium, manganese and copper) and the slope tended to affect the vertical movement of minerals. The contents of Ca and Mg increased with depth while NO$_3$-N and Zn decreased and correlated positively. Soil pH showed significant positive correlation with depth, Ca and Mg. Phosphorus content was highest in 10~20cm depth and decreased resulting in relatively high content in 30~40cm depth of the bottom site of slope. Iron distribution pattern was similar to phosphorus. Potassium and $NH_4$showed various(irregular) patterns. Mn was highest in the deep layer at the lower sites of slope but it was reverse at the upper sites and negatively correlated with Fe. Cu content incresed with depth and heighest in 20~30cm depth. Electroconductivity showed significant positive correlation with $NO_3$-N. Magnesium, cal-cium and copper seem to be prone to defficiency due to fast leaching, and nitrate and phosphorus prone to excess problem. Preventive measures on acidification of surface soil should be taken.

• Korean Journal of Environmental Biology
• /
• v.19 no.1
• /
• pp.7-17
• /
• 2001

Growth optima and tolerance ranges of marine algae species nay vary greatly during the developmental stage. The establishment stage is clearly of great importance for each generation, affecting the performance of the adult population. The present study was aimed to determine the effect of various concentrations of inorganic nutrients and heavy metals on germination and germlings of Ulva pertusa Kjellman (Chlorophyta). Percent germination increased rapidly as irradiance level increased, reaching the maximum at 100 ${\mu}$mol m$\^$-2/s$\^$-1/ in both east and west seawater. Percent germination in the east seawater was higher than that in the west seawater at irradiances lower than 30 ${\mu}$mol m$\^$-2/s$\^$-1/, and there was no difference in percent germination between the two different seawaters at irradiances higher than 60 ${\mu}$mol m$\^$-2/s$\^$-1/. Germling growth increased in the both cases with increasing irradiances but no growth was found in the dark. Overall germling area was larger in the east seawater than in the west seawater. Number of cell increased with increasing irradiance and became light-saturated at 100 ${\mu}$mol m$\^$-2/s$\^$-1/ in the both cases. Germlings grown in the east seawater had more cells than those cultivated in the west seawater at irradiances lower than 60 ${\mu}$mol m$\^$-2/s$\^$-1/. In various combinations of nitrate and phosphate, percent germination increased with increasing nitrate concentrations irrespective of phosphate concentrations. At 3 days after inoculation, nitrate concentration of 2.5 ppm with all phosphate concentrations promoted germination. Area and number of cell of germlings increased with increasing nitrate concentrations in all phosphate concentrations. In various combinations of copper and lead, germination was delayed as copper concentrations increased in all lead concentrations. Percent germination was severely reduced at 1 ppm Cu$\^$2+/. Area and number of cell of germlings decreased with increasing copper concentrations in all lead concentrations. The highest copper concentration (1 ppm) clearly suppressed the germling growth in U. pertusa.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.2
• /
• pp.246-256
• /
• 2021

Mo,Cu-doped CeO₂ (CMCuO) nanopowders were synthesized by the nitrate-fuel combustion method aiming to improve the electrical and electrochemical properties of its Mo-doped CeO₂ (CMO) parent by the addition of copper. An electrical conductivity of ca. 1.22·10^-2 S cm^-1 was measured in air at 800℃ for CMCuO, which is nearly 10 times higher than that reported for CMO. This increase was associated with the inclusion of copper into the crystal lattice of ceria and the presence of Cu and Cu₂O as secondary phases in the CMCuO structure, which also could explain the increase in the charge transfer activities of the CMCuO based anode for the hydrogen and carbon monoxide electro-oxidation processes compared to the CMO based anode. A maximum power density of ca. 120 mW cm^-2 was measured using a CMCuO based anode in a solid oxide fuel cell (SOFC) with YSZ electrolyte and LSM-YSZ cathode operating at 800℃ with humidified syngas as fuel, which is comparable to the power output reported for other SOFCs with anodes containing copper. An increase in the area specific resistance of the SOFC was observed after ca. 10 hours of operation under cycling open circuit voltage and polarization conditions, which was attributed to the anode delamination caused by the reduction of the Cu₂O secondary phase contained in its microstructure. Therefore, the addition of a more electroactive phase for hydrogen oxidation is suggested to confer long-term stability to the CMCuO based anode.

• Korean Journal of Veterinary Research
• /
• v.51 no.1
• /
• pp.47-53
• /
• 2011

In Korea, groundwater is main water source in livestock farms. Most dairy and cattle farms have constructed their own wells for human drinking and livestock farming. However, these private residential wells have not been controlled by government and also there was scant study about livestock drinking water quality. Therefore this study was to monitor of the livestock farms' groundwater quality in Korea. Water samples were collected at 123 dairy and cattle farms and were analysed forty six substances with quality standard for drinking water approved by the Minister of Environment. Seventy eight (63.4%) of 123 samples failed to drinking water stand a test. The most frequent contaminants were nitrate-nitrogen and microbial. 22.8% (n=28) of samples showed nitrate-N concentration of higher than 10 mg/L meant that can't be used drinking water for human and the Nitrate-N concentration analysed in the range of 0.2 to 61.2 mg/L. All of 78 failed to drinking samples had microbial problems, especially 5.7% (n=7) of samples indicated water could be contaminated by feces. Other contaminants detected were zinc and evaporation residue. Especially detected zinc concentration (32 mg/L) was about ten times higher than standard of zinc (3 mg/L). Regression analysis indicated that groundwater pH did not influence to nitrate-N concentration but the hardness and chloride could affect to nitrate-N concentration in the groundwater. Most livestock farms were adjacent to crop farmland in Korea. This could cause contamination of groundwater with nitrate-N and pesticide that could accumulate livestock product. Moreover Heavy metal such as zinc and copper could be released from a corrosive plated water pipe in livestock farm. Put together, Korea livestock system is indoor, not pasture-based, hence livestock could be exposed to potential contaminated water consistently. Therefore on the basis of these data, appropriate livestock drinking water quality standards should be prepared to keep livestock healthy and their product safe. Further, livestock drinking water quality should be monitored continuously in suitable livestock drinking water standards.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.80-90
• /
• 2016

The purpose of this study was to investigate the functional properties of natural dyed Hanji for cultural properties conservation and storage. To estimate functional properties of Hanji, antimicrobial, insect repellent test, and Oddy test were executed. Hanji dyed with 10% Golden thread (Coptis chinensis), a natural dye and silver nitrate mordanting showed the most excellent antifungal activities against A. niger, P. chrysogenum, and Trichoderma sp. before and after aging. The insects repellent test followed didn't indicate significant effects on treated Hanji against Lasioderma serricorne, Sitophilus zeamais, and Tribolium castaneum. According to Oddy test result, Hanji dyed with Golden thread and silver nitrate caused no significant corrosions on copper, silver, and lead after aging 28 days.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2113_2114
• /
• 2009

Chalcopyrite based sollar cells have received much attention because of their tunable electronic and optical properties. As a typical ternary chalcopyrite material, $CuInS_2$ has been considered as one of the most popular and promising candidates as absorber materials for photovoltaic applications because of its high absorption coefficient and environmental consideration. In this study, $CuInS_2$ powders have been synthesized using polyol process of a mixture of copper nitrate, indium nitrate, and thiourea with various stoichiometric molar ratios in ethylene glycol at $196^{\circ}C$. As boiling time goes by, the color of metal ion mixed solutions were changed transparent green to dark green and finally turned to black by reduction of OH- radicals. The prepared powders were fully characterized using SEM, XRD. The particle shape of black colored powders showed sphere with about 50 nm in particle size compared to those with dark green colored powders showed irregular shape with about $1{\mu}m$ in particle size. The XRD results showed highly crystallized $CuInS_2$.

• Carbon letters
• /
• v.25
• /
• pp.33-42
• /
• 2018

Activated carbon (AC) was modified by ammonium persulphate or nitric acid, respectively. AC and the modified materials were used as catalyst supports. The oxygen groups were introduced in the supports during the modifications. All the supports were characterized by $N_2$-physisorption, Raman, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and thermogravimetric analysis. Methanol synthesis catalysts were prepared through wet impregnation of copper nitrate and zinc nitrate on the supports followed by thermal decomposition. These catalysts were measured by the means of $N_2$-physisorption, X-ray diffraction, XPS, temperature programmed reduction and TEM tests. The catalytic performances of the prepared catalysts were compared with a commercial catalyst (CZA) in this work. The results showed that the methanol production rate of AC-CZ ($23mmol-CH_3OH/(g-Cu{\cdot}h)$) was higher, on Cu loading basis, than that of CZA ($9mmol-CH_3OH/(g-Cu{\cdot}h)$). We also found that the modification methods produced strong metal-support interactions leading to poor catalytic performance. AC without any modification can prompt the catalytic performance of the resulted catalyst.