• 공업화학
• /
• 제26권5호
• /
• pp.593-597
• /
• 2015

차세대 고밀도 연료인 tricyclopentadiene (TCPD)는 dicyclopentadiene (DCPD)를 Diels-Alder 소중합 반응을 통하여 제조하여 왔다. 이에 본 연구에서는 다양한 음이온 전구체와 양이온 전구체의 조합으로 만들어진 이온성 액체 촉매를 이용한 tricyclopentadiene (TCPD) 합성에 관한 연구를 수행하였다. 본 연구에 사용된 2가지 음이온 전구체는 copper(I) chloride (CuCl), iron(III) chloride ($FeCl_3$)이며 양이온 전구체는 triethylamine hydrochloride (TEAC), 1-butyl-3-methylimidazolium chloride (BMIC)이다. 이온성 액체 촉매의 소중합을 통한 TCPD의 제조는 기존 Diels-Alder 반응보다 DCPD의 전환율과 TCPD의 수율 측면에서 우수하였다. 또한, 음이온/양이온 전구체의 조합으로 제조된 이온성 액체 촉매의 산도와 TCPD 수율과의 상관관계가 있었다. 이온성 액체 촉매의 루이스 산도가 낮은 음이온 전구체로 CuCl를 이용하였을 때가 $FeCl_3$를 사용하였을 때보다 TCPD 수율이 좋았다. $FeCl_3$를 음이온 전구체로 하고 양이온 전구체로 BMIC를 사용하여 두 전구체의 몰 비를 조절하여 루이스 산도를 낮추면 TCPD 수율을 증가시킬 수 있었다.

• Corrosion Science and Technology
• /
• 제16권5호
• /
• pp.227-234
• /
• 2017

Reference electrodes are generally implemented for the purpose of monitoring the cathodic protection potentials of buried or immersed metallic structures. In the market, many types of reference electrodes are available for this purpose, such as saturated calomel, silver/silver chloride and copper/copper sulfate. These electrodes contain a porous ceramic junction plate situated in the cylindrical body bottom to permit ionic flux between the internal electrolyte (of the reference electrode) and the external electrolyte. In this work, the copper/copper sulfate reference electrode was modified by replacing the porous ceramic junction plate for a metallic platinum wire. The main purpose of this modification was to avoid the ion copper transport from coming from the inner reference electrode solution into the surrounding electrolyte, and to mitigate the copper plating on the coupon surfaces. Lab tests were performed in order to compare the performance of the two mentioned reference electrodes. We verified that the experimental errors associated with the measurements conducted with developed reference electrode would be negligible, as the platinum surface area exposed to the surrounding electrolyte and/or to the reference electrolyte are maintained as small as possible.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.405-411
• /
• 2012

Recovery of copper powder from copper chloride solution used in $MoO_3$ leaching process was carried out using a cementation method. Cementation is a simple and economical process, necessitating less energy compared with other recovery methods. Cementation utilizes significant difference in standard reduction potential between copper and iron under standard condition. In the present research, Cementation process variables of temperature, time, and added amount of iron scraps were optimized by using design of experiment method and individual effects on yield and efficiency of copper powder recovery were investigated using bench-scale cementation reaction system. Copper powders thus obtained from cementation process were further characterized using various analytical tools such as XRF, SEM-EDS and laser diffraction and scattering methods. Cementation process necessitated further purification of recovered copper powders and centrifugal separation method was employed, which successfully yielded copper powders of more than 99.65% purity and average $1{\mu}m$ in size.

• 전기학회논문지P
• /
• 제56권1호
• /
• pp.37-44
• /
• 2007

This paper describes characteristics for copper oxide growth of polyvinyl chloride(PVC) insulated wires by series arc. In this experiment, 600V IV wires were used, and characteristics of oxide growth and ignition process were analyzed in case load was 300W, 460W and 600W, respectively. In the result of experiment, covering materials were molten, carbonized and ignited, whereas, oxidized materials were grown in conducting material. During copper oxide was growing, contact voltages and power dissipations increased. When there is copper oxide growth, the waveform of current showed sinusoidal waveform, and the waveform of voltage showed modified waveform. Oxidized materials were heated at about $905^{\circ}C$, surface structure showed irregular shapes, and cross-section showed multiple cracks. And, the results of this experiment were applied to the fire cause analysis of fire evidence collected at the fire scene.

• Bulletin of the Korean Chemical Society
• /
• 제15권7호
• /
• pp.549-553
• /
• 1994

The 2-(dimethylaminomethyl)thiophene (dmamt) complexes with copper(II) chloride and bromide were prepared and characterized by optical, EPR, XPS spectroscopies and magnetic susceptibility measurements. The low-energy absorption band above 850 nm and the relatively small EPR hyperfine coupling constant ($A_{//}{\simeq}$125 G) indicate the pseudotetrahedral site symmetry around copper(II) ion both in Cu(dmamt)$Cl_2$ and Cu(dmamt)$Br_2$ complexes. The higher satellite to main peak intensity of Cu $2P_{3/2}$ core electron binding energy in XPS spectra also supports the pseudotetrahedral geometry around the copper(II) ions having $CuNSX_2$ chromophores. The distortion from square-planar to pseudotetrahedral symmetry is likely to arise from the steric hindrance of the bulky dmamt ligand in the complex. Magnetic susceptibility study shows that these compounds follow Curie-Weiss law in the temperature range of 77-300 K with positive Weiss constant exhibiting the ferromagnetic interaction between copper(II) ions in solid state.

• Archives of Pharmacal Research
• /
• 제9권4호
• /
• pp.211-214
• /
• 1986

A simultaneous determination method of alkaline earth metals was attempted with the conventional high performance liquid chromatographic system. Four cations, namely, magnesium, calcium, strontium and barium ion, were injected directly as aqueous solution into an eluent containing copper chloride solution and and were successfully separated and determined on a separating column (Zipax SCX, 4.6 mm i.d. ${\times}25$ cm length, Du Pont, USA) by using a variable wavelength UV detector. The linear calibration curves were obtianed in the range from $1.0{\times}10^{-4}M$ to $5.0{\times}10^{-4}M$ and the correlation coefficient of the calibration curve for each metal of magnesium and calcium in tap water. Alkaline earth metals were determined with the conventional high performance liquid chromatographic system.

• 한국세라믹학회지
• /
• 제13권2호
• /
• pp.8-16
• /
• 1976

The conductive transparent film is prepared by spraying thin salt solution. In stannic chloride solution as a base solution, various dopants such as Al, Co, Cu and Ni were dissolved respectively as a chloride state and then the films were made by spraying solutions on hot glass plates. The properties of them were compared with those of the stannic salt single component film. The films doped with copper oxide and nickle oxide were improved by decreasing their sheet resistivity and temperature coefficient of resistivity. In comparison with the sheet resistivity and temperature coefficient of resistivity of stannic oxide single component film, being 2.5 K ohm/$\textrm{cm}^2$ and -1650ppm/$^{\circ}C$ respectively, its values of the film containing 15 mol % of copper oxide and formed at 40$0^{\circ}C$ were 2.5K ohm/$\textrm{cm}^2$ and -920ppm/$^{\circ}C$ respectively. The film containing 15 mol % of nickel oxide and formed at 50$0^{\circ}C$ has shown its sheet resistivity and temperature coefficient 0.7 K ohm/$\textrm{cm}^2$ and -940ppm/$^{\circ}C$ respectively.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1661-1664
• /
• 2007

Direct reaction of elemental silicon with a gaseous mixture of isopropyl chloride (1) and hydrogen chloride in the presence of copper catalyst using a stirred bed reactor equipped with a spiral band agitator gave isopropyldichlorosilane having a Si-H bond (2a) as a major product and isopropyltrichlorosilane (2b) along with chlorosilanes, trichlorosilane and tetrachlorosilane. A process for production of 2a was maximized using the 1:0.5 mole ratio of 1 to HCl and smaller size of elemental silicon at a reaction temperature of 220 °C. When a reaction was carried out by feeding a gaseous mixture of 1 [12.9 g/h (0.164 mol/h)] and HCl [2.98 g/h (0.082 mol/h)] to a contact mixture of elemental silicon (360 g) and copper (40 g) under the optimum condition for 45 h, 2a among volatile products kept up about 82 mol % until 35 h and then slowly decreased down 68 mol % in 45 h reaction. Finally 2a was obtained in 38% isolated yield (based on 1 used) with an 85% consumption of elemental silicon in a 45 h reaction. In addition to 2a, 2b was obtained as minor product along with chlorosilanes, trichlorosilane, and tetrachlorosilane. The decomposition of 1 was suppressed and the production of 2a improved by adding HCl to 1.

• 헤리티지:역사와 과학
• /
• 제35권
• /
• pp.160-184
• /
• 2002

The composition analysis of mural pigments at Daeungjeon Hall of Bongjeongsa Temple(Treasure No. 55) and ancient tomb with mural pigments in Goadong(Historic site No. 165) were carried out by XRF and MXRD. The analytical result showed that red pigments were Red Lead($Pb_3O_4$), Cinnabar(HgS) at Daeungjeon Hall of Bongjeongsa Temple and Cinnabar(HgS) in Goadong. The main composition identified in white pigments were Lead Carbonate Hydroxide[$PbCO_3{\cdot}Pb(OH)_2$]. Green pigments were basic copper chloride[Paratacamite $CuCl{\cdot}Cu(OH)_3$], celadonite[$K(Mg,Fe,Al)_2(Si, Al)_4O_{10}(OH)_2$] at Daeungjeon Hall of Bongjeongsa Temple and were basic copper chloride or basic copper carbonate in Goadong. Therefore it proved that mural pigments painted in use the mineral materials.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.68-74
• /
• 2002

The lead has to be removed for the recycling of copper alloy. The lead cannot be removed from the copper alloy by oxidation. It can be removed by the evaporation because of its high vapor pressure. However, rare information is found on removal of lead from copper alloy. The purpose of present work is to provide a fundamental knowledges on the removal of lead from the copper alloy by evaporation. Gas injection was made in molten copper alloy, and the evaporation rate of lead was measured. The influence of Ar gas flow rata(2~4 L/min), initial contents of lead(2~4wt%Pb), temperature(1200~140$0^{\circ}C$) was investigated based on the thermodynamic and the kinetics. The rate constant is increased with increasing flow rate of Ar and temperature. Though amount of lead removed is increased with higher initial lead concentration, the rate constant is not changed significantly. The activation energy is estimated from the temperature dependence of the rate constant. Also removal of lead from the copper by adding chloride was made for the comparison.