• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.869-875
• /
• 2012

Because of the nature of wind, the output power of wind turbines fluctuates according to wind speed variation. Therefore, many countries have set up wind-turbine interconnection standards usually named as Grid-Code to regulate the output power of wind farms to improve power system reliability and power quality. This paper proposes three operation modes of wind farms such as maximum power point tracking (MPPT) mode, single wind turbine control mode and wind farm control mode to control the output power of wind turbines as well as overall wind farms. This paper also proposes an operation scheme of wind farm to alleviate power fluctuation of wind farm by choosing the appropriate control mode and coordinating multiple wind turbines in consideration of grid conditions. The performance of the proposed scheme is verified via simulation studies in PSCAD/EMTDC with doubly-fed induction generator (DFIG) based wind turbine models.

• IE interfaces
• /
• v.22 no.2
• /
• pp.144-152
• /
• 2009

Assembly line has been recognized as an efficient production system in mass production. However, the recent production environment characterized as mass customization urges production managers to transform a long assembly line to a number of short assembly cells. To maximize the utilization of resources in an assembly cell, it is important to have the line balanced. This paper presents a bucket brigade-based assembly cell. Bucket brigade is a way of coordinating workers who progressively perform a set of assembly operations on a flow line. Each worker follows a simple rule: perform assembly operations on a product until the next worker downstream takes it over; then go back to the previous worker upstream to take over a new assembly job. In this way, the line balances itself. The bucket brigade assembly cell is analyzed and compared with traditional assembly lines and general assembly cells. The paper also discusses some prerequisite requirements and limitations when the bucket brigade assembly cells are employed.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.198-199
• /
• 2017

This paper proposed a new control method for supercapacitor (SC) to compensate the pulse load transient and enhance the power quality of dc microgrid. By coordinating the operation frequency, the supercapacitor is controlled to handle the surge current component while the low-frequency current component is dealt with by remaining sources in the system. Based on the state of charge and dc bus voltage level, the SC unit operation mode is automatically decided. Meanwhile, the dc bus voltage level indicates the power demand of the whole system; by regulating the dc bus voltage, the mismatch of power demand is covered by SC unit. The effectiveness of proposed method is verified by experiment prototype formed by two distributed generation and one supercapacitor unit.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1234-1236
• /
• 1996

In this paper, the trajectory needed to be tracked by the manipulator was defined in a new plot differently from conventional methods. And the trajectory provides Solution directly related to coordinates of output variables from the plant. So, it overcomes nonlinearity between joint and Cartesian coordinates in movement mode and it makes use of inverse Kinematics unnecessary, which was obstacle for real-time control. The 2-axis SCARA robot was modelled and simulation was performed to validate in this paper. And it proved this has better performance in rapidity and decrease of position-error, compared to the conventional FLCs.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2358-2361
• /
• 2003

In this paper, parallel control method that enables coordinating operations of multiple mini ice storage air conditioner is proposed based on LonWorks system. The proposed parallel control method is a kind of master/slave control method based on LonTalk network communication. In the control method, master controller leading whole system operations is determined by date to avoid the disproportion of outdoor unit operations. In addition to the above, duty shift control method is proposed to avoid redundant operations of outdoor units and to equalize the operation frequencies of them. Through some simulation tests, the proposed parallel control method and the duty shift control method are evaluated and the efficiencies of them are validated by comparing with existing methods.

• Journal of the Korea Furniture Society
• /
• v.22 no.4
• /
• pp.245-251
• /
• 2011

The purpose of this research is to provide new direction on the field of the furniture design and to establish the identity of Korean furniture design as the flow of craft's juxtapose mixture era where it mix and match Korean traditional craft style materials with the modern furniture design. In other words, it is intended to create new furniture design and propose beautiful Korean luxury furniture design based on the precious unique culture with the traditional craft style, juxtaposition of modern furniture, and reinterpretation. It should grant artistic values that can satisfy consumers having various tastes and scarcity values, plus it should put out aesthetic and creative expressions in furniture design putting into the beautiful traditional craft form values. Furthermore, it is required to create new design through values and spirit, materials, techniques, forms, pattern, and usages by interacting, coordinating, and combining tradition and modern East and West, plus craft and design.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.4
• /
• pp.111-128
• /
• 1996

This paper is focused on the desirable improvement schemes of the local network of information and telecommunication network. In this study, we examined whether polices of information and telecommunication of government have been carried out a desirable programme to meet the public interest, found out several problems in the these policies. Such problems as follows : (1) a system of local information & telecommunication is developing by a Model of Top-Down. In the present management system, an interest of the public of local society about the local telecommunication network is a much lower level, (2) there is no general controlling roll of the local information & telecommunication, (3) there is no service controlling system of local telecommuni-cation, and (4) there is no organic coordinating system of inter-departments in the central government level. In order to resolve these problems, this study suggests a few desirable sxhemes for the local telecommunication : (1) an establishment of middle-long range planning for the integrated future network of info-telecommunication, (2) an organizing of telecommunication network being suitable for the local characteristics toward B-ISDN.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.832-833
• /
• 2007

This paper presents an asynchronous decentralized optimization method to coordinate energy trading between electricity markets. The proposed method decomposes the market optimization problem of interconnected electricity markets into individual market optimization problems. The decomposed problem is solved by using the Interior Point/Cutting Plane (IP/CP) method with asynchronous communication model. A numerical example is presented to validate the effectiveness of the proposed method.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.1
• /
• pp.75-80
• /
• 1997

Preparation and properties of Eu(hfa)3·L (Hhfa = hexafluoroacetylacetone, L = bis(2-methoxyethyl)ether, diglyme, and 2, 2':6', 2"-terpyridine, tpy), which are potential CVD precursors for europium, were investigated. The reaction of the Eu2O3 with Hhfa in the presence of tridentate neutral ligand yielded the nine-coordinated Eu(hfa)3·L. Eu(hfa)3·diglyme is air- and moisture-stable and most importantly has good volatility and thermal stability. Eu(hfa)3·tpy shows no sublime intact. The complex Eu(hfa)3·diglyme has been characterized by an X-ray structure determination; monoclinic P21/n, a=10.252(1), b=16.051(6), c=19.392(8) Å, β=96.10(2)°, V=3173(2) Å3. The europium atom in Eu(hfa)3·diglyme adopts a square-antiprismatic geometry with the ninth coordinating oxygen atom capping one of the square faces. All the adducts have been characterized by IR, TGA/DTA.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.701-704
• /
• 1999

Metallophthalocyanines [PcM, Pc: phthalocyanine, M: Fe 2+ , Co 2+ ] were reacted with α-isocyanonaphthalene( α-in) and α-isocyanoanthracene (α-ia) to form monomeric complexes. The synthesis and coordination behaviour of the isocyanides as a ligand (L) are discussed. All the products were characterized by spectroscopic methods and instrumental analysis. The electrical conductivities of these complexes, which were not treated with dopant, were attributed to the metal-ligand electron delocalization in the PcML2 complexes. The complexes have an enlarged macrocycle where the π-electron back donating ability of PcM is stronger than the σ-electron coordinating ability of the isonitrile ligands. Their electrical conductivities were measured as σRT = 2.1×10 -9 ~3×10 -10 S/cm. Also thermal stability was investigated in this study.