• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.446-450
• /
• 1993

In this paper we propose an arc welding robot system, where two robots works coordinately and employ the vision sensor. In this system one robot arm holds a welding target as a positioning device, and the other robot moves the welding torch. The vision sensor consists of two laser slit-ray projectors and one CCD TV camera, and is mounted on the top of one robot. The vision sensor detects the 3-dimensional shape of the groove on the target work which needs to be weld. And two robots are moved coordinately to trace the grooves with accuracy. In order to realize fast image processing, totally five sets of high-speed parallel processing units (Transputer) are employed. The teaching tasks of the coordinated motions are simplified considerably due to this vision sensor. Experimental results reveal the applicability of our system.

• 대한산업공학회지
• /
• 제3권1호
• /
• pp.49-53
• /
• 1977

The coordinated control of the traffic signals of adjacent intersections can reduce delays, relative number of stops and congestions in the coordinated traffic area. The road capacity can be increased to a certain extend because the stopping and starting of vehicles facing red traffic lights can be avoided in many instances due to the progression established along an artery. However, if traffic centers or leaves the main flow in irregular volumes on the intermediate road section, a coordination of traffic signals is unnecessary and may even be harmful. Therefore, a computer simulation model to simulate and predict the effectiveness of a synchronized traffic signal system in the CBD of Seoul was developed and alternative policy variables, such as cycle time, offsets, phase splits, to be fed into the simulation model had to be generated. This is a report of (1) the development of a heuristic algorithm for the determination of phase splits when there are amber periods specifically reserved for left turns and (2) the computerization of time-space diagramming.

• Journal of information and communication convergence engineering
• /
• 제11권3호
• /
• pp.167-172
• /
• 2013

Recently, mobile communication systems are suffering from exponentially increasing data traffic. As a promising solution to the increase in data traffic, a coordinated multi-point transmission and reception (CoMP) scheme has been proposed. Although a great deal of research has been done on this new technology, the performance of mobile communication systems with CoMP has not been evaluated properly in a typical indoor environment. To address this, we have developed a system-level simulator and evaluated the performance of mobile communication systems with CoMP. Unlike previous works, we have used an actual antenna pattern in our simulator and link-level results are properly taken into account through link-level abstraction. By using a system-level simulator, we have evaluated the performance of mobile communication systems with CoMP in an indoor environment and found that unlike an outdoor cellular environment, CoMP may not improve the performance of overall mobile communication systems in an indoor environment.

• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1116-1127
• /
• 2016

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.457-466
• /
• 2009

This paper presents efficient parallel genetic algorithm (EPGA) based decomposed network for optimal power flow with various kinds of objective functions such as those including prohibited zones, multiple fuels, and multiple areas. Two coordinated sub problems are proposed: the first sub problem is an active power dispatch (APD) based parallel GA; a global database generated containing the best partitioned network: the second subproblem is an optimal setting of control variables such as generators voltages, tap position of tap changing transformers, and the dynamic reactive power of SVC Controllers installed at a critical buses. The proposed approach tested on IEEE 6-bus, IEEE 30-bus and to 15 generating units and compared with global optimization methods (GA, DE, FGA, PSO, MDE, ICA-PSO). The results show that the proposed approach can converge to the near solution and obtain a competitive solution with a reasonable time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.226-228
• /
• 2002

This paper presents a new control approach for designing a coordinated controller for static VAR compensator system. A SVC constructed by a Fixed Capacitor and a Thyristor Controlled Reactor is designed and implemented to improve the damping of a synchronous generator, as well as controlling the system voltage. A design of linear quadratic controller based on optimal controller depends on choosing weighting matrices. A coordinated optimal controller is achieved by minimizing a quadratic performance index using dynamic programming techniques. The selection of weighting matrices is usually carried out by trial and error which is not a trivial problem. We proposed a efficient method using GA of finding weighting matrices for optimal control law. Thus, we prove the usefulness of proposed method to improve the stability of single machine-infinite bus with SVC system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1121-1123
• /
• 1997

The control strategy for damping analysis of STATCON is derived based on an energy function of the power system equation. The center-of-angle(COA) coordinated system by a simple equivalent physical system is used and the control law for this system is induced for FACTS devices as TCSC and STATCON. Damping results from the transient performance simulations carried out on the model system.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.719-728
• /
• 2015

This paper presents the results of field tests on Voltage Management System (VMS) using hybrid voltage control, which utilizes coordinated controls of various reactive power resources such as generators, FACTS and switched shunt devices to regulate the pilot bus voltage in a voltage control area. It also includes the results of performance test on RTDS-based test bed in order to validate the VMS before installing it in Jeju power system. The main purpose of the system is adequately to regulate the reactive power reserve of key generators in a normal condition with coordination of discrete shunt devices such as condensers and reactors so that the reserves can avoid voltage collapse in emergency state in Jeju system. Field tests in the automatic mode of VMS operation are included in steady-states and transient states. Finally, by the successful operation of VMS in Jeju power system, the VMS is proved to effectively control system voltage profiles in steady-state condition, increase system MVAR reserves and improve system reliability for pre- and post-contingency.

• 제어로봇시스템학회논문지
• /
• 제10권1호
• /
• pp.22-29
• /
• 2004

This paper studies the coordinated trajectory control of an excavator as a kind of robotic manipulators driven by hydraulic actuators. Hydraulic robot system has many non-linearity in dynamics and kinematics, and strong coupling among joints(or hydraulic cylinders). This paper proposes a combined controller frame of the adaptive robust control(ARC) and the sliding mode control(SMC) for the trajectory tracking control of the excavator to preserve the advantages of the both methods while overcoming their drawbacks, namely, asymptotic stability of adaptive system for parametric uncertainties and guaranteed transient performance of sliding mode control for both parametric uncertainties and external disturbance. The suggested control technique is applied for the tracking of a straight-line motion of end-effector of manipulators, and through computer simulations, its trajectory tracking performances and the robustness to payload variation and uncertainties are illustrated.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.166-174
• /
• 2004

In urban area narrow commuter vehicles have attracted interest as a possible solution to reduce traffic congestion and parking problems. However, a narrow vehicle has an increased to overturn during hard cornering when compared to conventional vehicles. This tendency can be reduced by tilting it toward the inside of the turn. Two types of automatic tilting control systems which are Direct Tilt Control(DTC) and Steering Tilt Control(STC) have been developed. In this paper as one of the technique to improve the handling performance for the unusual vehicle the control system which blends both the DTC and the STC system is considered. It uses the merits of both the DTC and the STC system. As a control strategy for combination the switching control method is used. Finally, the fact that the unusual vehicle is safe under an emergency situation such as slippery road surface is proved by computer simulation.