• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.191-199
• /
• 2023

We propose a dual Fabry-Perot interferometer (DFPI) structure that combines two Fabry-Perot interferometers. The structure is designed to have spectral peaks in the red, green, and blue regions simultaneously, to be applicable to R, G, and B subpixels without any patterning process. The optimized structure has been fabricated on a glass substrate using a thermal evaporation technique. When the DFPI structure was attached to the quantum-dot color-conversion layer, the full width at half maximum values of the green and red spectra decreased by 47.29% and 51.07% respectively. According to CIE 1931 color space, the DFPI showed a 37.66% wider color gamut than the standard RGB color coordinate. Thus it was experimentally proven that the proposed DFPI structure improved color purity. This DFPI structure will be useful in realizing a display with high color purity.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.124-133
• /
• 1994

Many of non-contact measuring systems are used to estimate surface characteristics owing to their advantages of high speed and undanaged test. In this paper, a new measuring system is proposed to acquire image from CCD camera through back light illumination. Lowpass filter is very useful in view of noise removal and optimum binary image can be made through histogram equalization which is one of the histogram technique to maximize brightness intensity between workpiece and background. Laplacian operator is used to detect workpiece edge from binary image. In case of image treatment applying Laplacian operator, surface roughness is calculated by introducing conversion coefficient for coordinate of pixel which edge is composed of. In summary, the work is concerned with the development of a new technique for roughness measurement by the image processing in turning.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.3
• /
• pp.81-86
• /
• 2010

Since CORDIC (COordinate Rotation DIgital Computer) is able to carry out the phase operation, such as vector to phase conversion or rotation of vectors, with adders and shifters, it is well suited for the design of the frequency synchronization unit in OFDM receivers. It is not easy, however, to fully utilize the CORDIC in the OFDM demodulator because of the non-linear characteristics of the direction sequence (DS), which is the representation of the phase in CORDIC. In this paper a new representation method is proposed to linearize the direction sequence approximately. The maximum phase error of the linearized binary direction sequence (LBDS) is also discussed. For the purpose of designing the hardware, the architectures for the binary DS (BDS) to LBDS converter and the LBDS to BDS inverse converter are illustrated. Adopting LBDS, the overall frequency synchronization hardware for OFDM receivers can be implemented fully utilizing CORDIC and general arithmetic operators, such as adders and multipliers, for the phase estimation, loop filtering of the frequency offset, derotation for the frequency offset correction. An example of the design of 22 bit LBDS for the T-DMB demodulator is also presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.10
• /
• pp.64-74
• /
• 2007

Because of the size and environment in the shipbuilding process, the portable type robot is required for the automatic seam tracking. For this reason, the structure of laser sensor should be considered in the initial design step and the coordinate transformation between welding robot and laser sensor, which is joint finder, must be identified exactly and the real time tracking algorithm based on these consideration could be developed. In this research, laser displacement sensor in which its structure is laser beam's vertical projection, is developed to recognize the location of weld joint. In practical applications, however, images of weld joints are often degraded because of the surface specularity or spatter. To overcome the problem, the constrained joint finding algorithm is proposed. In the approach of coordinate conversion rule for the visual feedback control among welding torch, robot body and laser sensor is applied by the same reference point method. In the real time seam tracking algorithms we propose constrained sampling method which uses look ahead distance. The RLS(Recursive Least Square) filter is applied to obtain the smooth tracking path from the sensitive edge data. From the experimental results, we could see the possibility that the developed laser sensor with proposed processing algorithm and real time seam tracking method can be used as a welding under the shipbuilding condition.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.325-329
• /
• 2016

Facial authentication has the limelight because it has less resistance and it is hard to falsify among various biometric identification. The algorithm of facial authentication can bring about huge difference in accuracy and speed by the algorithm construction. Along with face-extracted data by tracing and extracting pupil, the thesis studied algorithm which extracts data to improve error rate and to accurately authenticate face. It detects face by cascade, selects as significant area, divides the facial area into 4 equal parts to save the coordinate of object. Also, to detect pupil from the eye, the binarization is conducted and it detects pupil by Hough conversion. The core coordinate of detected pupil is saved and calculated to conduct facial authentication through data matching. The thesis studied optimized facial authentication algorithm which accurately calculates facial data with pupil trace.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.15-23
• /
• 2017

The WGS conversion project of cadastral drawing (promoted by the Ministry of Land) is not able to reflect the cadastral registration due to subtle differences such as area and location. When converting the digital cadastral region to the world geodetic system, the boundary point coordinates must be changed to the legal coordinate units. However, there is a phenomenon that occurs in which the minute area changes do not coincide with the area registered in the cadastral registration when the coordinate unit is changed. In this study, we have developed a method to adjust many parcels collectively by applying a passive fine-tuning method used in cadastral resurvey project to solve these problems. Total 1, total 2+1, interval 1, interval 2+1, etc. were classified based on the number of parcels that need to be considered for the range of adjustment and the area condition. The analysis of the experimental area (after developing SW for comparison of each method) showed that the total 2+1 method is suitable for the location accuracy and the interval 2+1 method is suitable for the temporal efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.589-596
• /
• 2011

Picture Quality Improvement Systems(PQIS) have been developed for user's needs with the development of display technology. Most PQIS change the all input data, so there were some color distortion. In order to compensate such problems, the PQIS using Skin Protection Algorithm(SPA) have been proposed. But the PQIS using SPA is performed simplex color emphasis, as a result occurred color saturation and decoloration. In this paper, we proposed the modified PQIS using SPA on CIE 1976 u'v' chromaticity coordinate. The modified method operated chromaticity extension and reduction at the same time about brightness value to prevent the saturation and decoloration. We evaluated by comparing the conventional method with the proposed method of RGB Gamut variation rate using 42 test image.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.241-246
• /
• 2004

Medical images are being managed more by PACS in general medical institutions. It is important to protect patients from being invaded their privacy related to the images. It is also necessary to confirm the ownership, the right of properity of the medical images and notice whether the data are modified. In this paper, we propose a robust watermarking against RST attacks in medical images on the PACS. The proposed scheme modifies and improves Log-Polar Mapping and Fourier Mellin Transform in order to realize and recover serious image degradation and watermark data loss caused by the conversion between cartesian coordinate and log-polar coordinate. We used the radius and theta Look Up Table to solve the realization of the Fourier Mellin Transform, and inserted a watermark into 2D-DFT magnitudes using Spread Spectrum. Experimental results shows that this method are robust to several attack.

• Tribology and Lubricants
• /
• v.39 no.6
• /
• pp.221-227
• /
• 2023

A rotordynamic system consists of components that undergo rotational motion. These components include shafts, impellers, thrust collars, and components that support rotation, such as bearings and seals. The motion of this type of rotating system can be modeled as two-dimensional motion and, accordingly, the equation of motion for the rotordynamic system can be represented using complex coordinates. The directional frequency response function (dFRF) can be derived from this complex coordinate system and used as an effective analytical tool for rotating machinery. However, the dFRF is not widely used in the field because most previous studies and commercial software are based on real coordinate systems. The objective of the current study is to introduce the dFRF and show that it can be an effective tool in rotordynamic analysis. In this study, the normal frequency response function (nFRF) and dFRF are compared under rotordynamic analysis for isotropic and unisotropic rotors. Results show that in the nFRF, the magnitude of the response is the same for both positive and negative frequencies, and the response is similar under all modes. Consequently, the severity of the mode cannot be identified. However, in the dFRF, the forward and backward modes are clearly distinguishable in the frequency domain of the isotropic rotor, and the severity of the mode can be identified for the unisotropic rotor.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.4
• /
• pp.267-277
• /
• 2019

Photogrammetry and computer vision are identical in determining the three-dimensional coordinates of images taken with a camera, but the two fields are not directly compatible with each other due to differences in camera lens distortion modeling methods and camera coordinate systems. In general, data processing of drone images is performed by bundle block adjustments using computer vision-based software, and then the plotting of the image is performed by photogrammetry-based software for mapping. In this case, we are faced with the problem of converting the model of camera lens distortions into the formula used in photogrammetry. Therefore, this study described the differences between the coordinate systems and lens distortion models used in photogrammetry and computer vision, and proposed a methodology for converting them. In order to verify the conversion formula of the camera lens distortion models, first, lens distortions were added to the virtual coordinates without lens distortions by using the computer vision-based lens distortion models. Then, the distortion coefficients were determined using photogrammetry-based lens distortion models, and the lens distortions were removed from the photo coordinates and compared with the virtual coordinates without the original distortions. The results showed that the root mean square distance was good within 0.5 pixels. In addition, epipolar images were generated to determine the accuracy by applying lens distortion coefficients for photogrammetry. The calculated root mean square error of y-parallax was found to be within 0.3 pixels.