• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1036-1043
• /
• 2014

The installation of PV system to the power distribution system is being increased as one of solutions for environmental pollution and energy crisis. Because the output efficiency of PV system is getting decreased because of the aging phenomenon and several operation obstacles, the technology development of output prediction and state diagnosis of PV modules are required in order to improve operation performance of PV modules. The conventional methods for output prediction by considering various parameters and standard test condition values of PV modules may have difficult and complex computation procedure and also their prediction values may produce large error. To overcome these problems, this paper proposes an optimal prediction algorithm and state diagnosis algorithm of PV modules by using least square methods of linear regression analysis. In addition, this paper presents a state diagnosis evaluation system of PV modules based on the proposed optimal algorithms of PV modules. From the simulation results of proposed evaluation system, it is confirmed that the proposed algorithms is a practical tool for state diagnosis of PV modules.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3628-3633
• /
• 2012

This paper proposes a model of the real time monitoring system based on Ubiquitous Sensor Network (USN) for the detection and prediction of landslides. For this purpose, the real time monitoring system with tilting sensor and USN was set up and the performance was conducted. The performance was accomplished by conducting both field examinations and the experimental evaluation of the monitoring system. The results of this study show that the angle $0^{\circ}$, $-10^{\circ}$, $-20^{\circ}$ and $0{\sim}-30^{\circ}$ of sensor position detected by the sensor module coincide with the data measured from USN monitoring system by giving a sampling time 100[msec]. Consequently, the proposed model of the real time monitoring system with tilting sensor based on USN will be widely used as a monitoring system in the exposure to dangerous landslide regions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2641-2654
• /
• 2014

In the smart media environment, magazine industry has been experiencing a transition to ecosystem of value network, which includes high complexity and ambiguity. Using case study method, this article conducts research on digital convergence, the model of magazine ecosystem and adaptation strategy of global magazine companies. Research findings have it that the way of contents production of global magazines has been based on collaborative production system within communities, expert communities, creative users, media contents companies and magazine platform. The system shows different patterns and characteristics depending on magazine-driven platform, Platform-driven platform or user-driven platform. Collaboration system has been confirmed in various cases: Huffington Post and Zinio which collaborate with media contents companies, Amazon magazines and Bookish with magazine companies, Huffington Post and Wired with expert communities, and Flipboard with creative users and communities. Foreign magazine contents diverge into (paper, electronic, app and web magazine) as they start the lively trades of their contents on the magazine platform. In the area of contents uses, readers employ smart media technology effectively such as cloud computing, artificial intelligence and module individualization, making it possible for the virtuous cycle to remain in the relationship within communities, expert communities and creative users.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.647-654
• /
• 2016

In the defense industry, national security takes priority over economic sense and this has translated into high cost and long-term research and development. However, the exponential growth of technology and rapid changes in the security situation in recent years have resulted in a call for the development of systems at a low cost within a short period of time. In order to implement a modularization strategy in the field of defense, the introduction of line replaceable units in OO systems needs to be prioritized. This study selects six criteria following a literature review and prioritizes 11 modules for OO systems using the project evaluation method, Grey Relational Analysis (GRA). Based on the GRA results, the grey relational grades were derived as 0.83, 0.81 and 0.80 for the M11 (Main board), M8 (EMI module), M3 (Single board computer) modules, respectively. The cost and time of development is expected to be reduced in accordance with the grey relational grade. The results of this research could be utilized for decision making on adopting modularization in similar system development or product improvement programs (PIPs).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.45-50
• /
• 2016

This paper reports a Ringer's solution detector and transceiver design for the efficient management of patients. The ringer's solution detection and transceiver consisted of the main control part, ringer's solution detection part, display and warning light part, wireless transceiver, and power supply part. The light receiving part of the ringer's solution detection part employed TSL260R-LF photodiode; light permeating part, Water-Clear type LED; and wireless transceiver part, the RF wireless data transceiver module, NR-FPCX. As a result of this Ringer's solution detector and transceiver design that can manage the patient efficiently, it was found that when the ringer's solution was detected by the double photodiode, the operating frequency was 11.95kHz; when it was not detected, the number was 9.6kHz. In the ringer's solution receiver, when the ringer's solution was detected, the number was 0. The corresponding unique RF code was displayed when not detected. The power used in the ringer's solution detection part was converted to the Sleep mode to operate under battery save mode. The ringer's solution transceiver can exchange wireless communication approximately within a 700m radius.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.745-752
• /
• 2016

In the era of the Internet of Things, where all physical objects are connected to the Internet, we suggest a remote control system using a Raspberry Pi single-board computer with ZigBee, which can turn an indoor light-emitting diode (LED) and a multiple-tap on and off, and with a smart phone can control the brightness of the LED as well as an electronic door lock. By connecting an infrared (IR) transmitter module to the Raspberry Pi, we can control home appliances, such as an air conditioner, and we can also monitor indoor images, indoor temperatures, and illumination by using a smart phone app. We developed a method of finding out IR transmission codes required for remote-controllable appliances with an AVR micro-controller. We suggest a method to remotely open and shut an office door by novating the door lock. The brightness level of an LED (between 0 and 10) can be controlled through a PWM signal generated by an ATmega88 microcontroller. A mutiple-tap is controlled using an ATmega32, a photo-coupler, and a TRIAC. The signals for measured temperature and illumination are converted from analog to digital by using the ATtiny44A microcontroller transmitting to a Raspberry Pi through SPI communication. Then, we connect a camera to the CSI head of the Raspberry Pi. We can turn on the smart multiple-tap for a certain period of time, or we can schedule the multi-tap to turn on at a specific time. To reduce standby power, people usually pull out a power code from multiple-taps or turn off a switch. Our method helps people do the same thing with a smart phone, if they are away from home.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.319-330
• /
• 2016

Recently, 3D printing technology has been applied to make a concept model and working mockup of an industrial application. On the other hand, this technology has limited applications in industrial products due to the materials and reliability of the 3D printed product. In this study, the components of a full cord switch module are proposed as a case of a 3D printed component that can be used as a substitute for a short period. These are hub-driven and lever lockup components that have the structural characteristics of breaking down frequently in the emergency operating status. To ensure the structural strength for a substitute period, research of structure optimization was performed because 3D printing technology has a limitation in the materials used. After optimizing the structure variables of the hub-driven component, reasonable results can be drawn in that the safety factors of the left and right switching mode are 1.243 (${\Delta}153.67%$) and 3.156 (${\Delta}404.96%$). The lever lockup component has a structural weak point that can break down easily on the lockup-part because of a cantilever shape and bending moment. The rib structure was applied to decrease the deflection. In addition, optimization of the structural variables was performed, showing a safety factor of 7.52(${\Delta}26%$).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.536-543
• /
• 2017

This study developed a new methodology to evaluate the carbon storage using a Mobile Mapping System according to the life cycle of street trees. The system for calculating the carbon storage of a roadside tree using the MMS developed in this study consisted of a database, memory, processor, user interface, and communication module. The carbon storage was calculated for 261 trees in the Cheonan-Asan New Town (distance: 2.1 km, area: $283,698m^2$). The average biomass and carbon storage of Metasequoia glyptostroboides were highest at 34.5 kg and 17.3 kg C and Chionanthus retusa were lowest at 19.5 kg and 9.8 kg C, respectively. The total biomass and total carbon storage of Ginkgo biloba were highest at 5028.8 kg and 17.3 kg C and Chionanthus retusa were lowest at 780.7 kg and 390.3 kg C, respectively. Based on the roadside tree database, the amount of carbon storage in a given area was converted to Google format and visualized in 3D by GIS analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.93-100
• /
• 2017

The purpose of this study was to develop a simulation-based practice that enhances the core competencies of nursing students and to investigate the effects on critical thinking disposition, communication skill, and clinical performance for nursing students. This study used a one group, pre-post test design. There were 53 nursing students from G city enrolled in this study, and self-reported questionnaires were collected between June 10 and August 19, 2016. The simulation-based practice was applied for 6-8 hours/day for 60 hours, using a 4-practice module. The data were analyzed by frequencies, paired t-test, and Pearson's correlation using SPSS Win 18.0. The results showed that there was a significant difference in the clinical performance, however, there was no significant difference in the critical thinking disposition and communication skill. After the simulation-based practice, clinical performance was found to be positively correlated with critical thinking disposition (r= .628, p<.001) and communication (r=.716, p<.001). Critical thinking disposition and communication (r=.650, p<.001) also showed a positive correlation. In order to improve clinical competence, it is necessary to develop a simulation-based practice that enhances critical thinking disposition and communication skill.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.201-208
• /
• 2017

Recently, the installation of photovoltaic(PV) systems has been increasing due to the worldwide interest in eco-friendly and abundant solar energy. On the other hand, a PV system has approximately 25% power loss while the energy generated from solar cells is transformed to the power coupling point through a power conversion system (DC/AC). If the output voltage of a string in the PV system is lower than the operating range of the inverter when a part of module in the string has a shadow due to weather conditions, the string is not synchronized and the whole efficiency of output power in a PV system may be reduced significantly. Therefore, to overcome this problem, this paper proposes a novel control method to compensate for the lower voltage by introducing a DC/DC voltage regulator for each string in a PV system, which adopts a concept for MPPT (Maximum Power Point Tracking) control function using the P&O algorithm and adopts constant voltage control method used in an existing inverter. This paper also implements a 2kW DC/DC voltage regulator based on the proposed algorithm and performs a variety of scenario-based experiments. From the simulation result, it was confirmed that the operation efficiency in the proposed method is improved compared to the existing method.