• Title/Summary/Keyword: cooking and drying

Search Result 81, Processing Time 0.03 seconds

Finite Element Prediction of Temperature Distribution in a Solar Grain Dryer

  • Uluko, H.;Mailutha, J.T.;Kanali, C.L.;Shitanda, D.;Murase, H
    • Agricultural and Biosystems Engineering
    • /
    • v.7 no.1
    • /
    • pp.1-7
    • /
    • 2006
  • A need exists to monitor and control the localized high temperatures often experienced in solar grain dryers, which result in grain cracking, reduced germination and loss of cooking quality. A verified finite element model would be a useful to monitor and control the drying process. This study examined the feasibility of the finite element method (FEM) to predict temperature distribution in solar grain dryers. To achieve this, an indirect solar grain dryer system was developed. It consisted of a solar collector, plenum and drying chambers, and an electric fan. The system was used to acquire the necessary input and output data for the finite element model. The input data comprised ambient and plenum chamber temperatures, prevailing wind velocities, thermal conductivities of air, grain and dryer wall, and node locations in the xy-plane. The outputs were temperature at the different nodes, and these were compared with measured values. The ${\pm}5%$ residual error interval employed in the analysis yielded an overall prediction performance level of 83.3% for temperature distribution in the dryer. Satisfactory prediction levels were also attained for the lateral (61.5-96.2%) and vertical (73.1-92.3%) directions of grain drying. These results demonstrate that it is feasible to use a two-dimensional (2-D) finite element model to predict temperature distribution in a grain solar dryer. Consequently, the method offers considerable advantage over experimental approaches as it reduces time requirements and the need for expensive measuring equipment, and it also yields relatively accurate results.

  • PDF

Trend and Further Research of Rice Quality Evaluation (쌀의 품질평가 현황과 금후 연구방향)

  • Son, Jong-Rok;Kim, Jae-Hyun;Lee, Jung-Il;Youn, Young-Hwan;Kim, Jae-Kyu;Hwang, Hung-Goo;Moon, Hun-Pal
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.47
    • /
    • pp.33-54
    • /
    • 2002
  • Rice quality is much dependent on the pre-and post harvest management. There are many parameters which influence rice or cooked rice qualitys such as cultivars, climate, soil, harvest time, drying, milling, storage, safety, nutritive value, taste, marketing, eating, cooking conditions, and each nations' food culture. Thus, vice evaluation might not be carried out by only some parameters. Physicochemical evaluation of rice deals with amy-lose content, gelatinizing property, and its relation with taste. The amylose content of good vice in Korea is defined at 17 to 20%. Other parameters considered are as follows; ratio of protein body-1 per total protein amount in relation to taste, and oleic/linoleic acid ratio in relation to storage safety. The rice higher Mg/K ratio is considered as high quality. The optimum value is over 1.5 to 1.6. It was reported that the contents of oligosaccharide, glutamic acid or its derivatives and its proportionalities have high corelation with the taste of rice. Major aromatic compounds in rice have been known as hexanal, acetone, pentanal, butanal, octanal, and heptanal. Recently, it was found that muco-polysaccharides are solubilized during cooking. Cooked rice surface is coated by the muco-polysaccharide. The muco-polysaccharide aye contributing to the consistency and collecting free amino acids and vitamins. Thus, these parameters might be regarded as important items for quality and taste evaluation of rice. Ingredients of rice related with the taste are not confined to the total rice grain. In the internal kernel, starch is main component but nitrogen and mineral compounds are localized at the external kernel. The ingredients related with taste are contained in 91 to 86% part of the outside kernel. For safety that is considered an important evaluation item of rice quality, each residual tolerance limit for agricultural chemicals must be adopted in our country. During drying, rice quality can decline by the reasons of high drying temperature, overdrying, and rapid drying. These result in cracked grain or decolored kernel. Intrinsic enzymes react partially during the rice storage. Because of these enzymes, starch, lipid, or protein can be slowly degraded, resulting in the decline of appearance quality, occurrence of aging aroma, and increased hardness of cooked rice. Milling conditions concerned with quality are paddy quality, milling method, and milling machines. To produce high quality rice, head rice must contain over three fourths of the normal rice kernels, and broken, damaged, colored, and immature kernels must be eliminated. In addition to milling equipment, color sorter and length grader must be installed for the production of such rice. Head rice was examined using the 45 brand rices circulating in Korea, Japan, America, Australia, and China. It was found that the head rice rate of brand rice in our country was approximately 57.4% and 80-86% in foreign countries. In order to develop a rice quality evaluation system, evaluation of technics must be further developed : more detailed measure of qualities, search for taste-related components, creation and grade classification of quality evaluation factors at each management stage of treatment after harvest, evaluation of rice as food material as well as for rice cooking, and method development for simple evaluation and establishment of equation for palatability. On policy concerns, the following must be conducted : development of price discrimination in conformity to rice cultivar and grade under the basis of quality evaluation method, fixation of head rice branding, and introduction of low temperature circulation.

Problems and Possible Solutions about Feed Fungi and Mycotoxins (사료 중의 곰팡이와 곰팡이 독소에 대한 문제점과 가능한 대책)

  • 남기홍
    • Korean Journal of Poultry Science
    • /
    • v.21 no.2
    • /
    • pp.113-117
    • /
    • 1994
  • Of the 200, 000 known species of molds, only 50 or 60 are known to be harmful to humans or livestock. Certain fungi that grow on grains and grasses can produce chemical substances called mycotoxins that adversely affect performance in poultry. There are several methods of preserving feed ingredients. The list includes: drying, antioxidants, mold inhibitors, organic acids, phosphates, cooking or toasting, fat extraction, blending and fermenting. Mold inhibitors are manufactured to inhibit mold growth and prevent the production of toxic substances. They are fungistats and not fungicides, that is, they only stop the growth of molds. Practical and cost-effective methods to detoxify mycotoxin containing feedstuffs are in great demand. 0.5% hydrated sodium calcium aluminosilicate added to the diet protected chicks from the deleterious effects of aflatoxin-contaminated feed. The dietary addition of antioxidants and methionine also significantly diminished the negative effects on body weight in chicks toxicated with 3.0 ppm aflatoxin B1.

  • PDF

Quality Characteristics of Sulgidduk Supplemented with Ligularia fischeri Powder (곰취가루를 첨가한 설기떡의 품질 특성)

  • Kang, Yang-Sun;Kim, Jung-Soo
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.21 no.2
    • /
    • pp.277-283
    • /
    • 2011
  • The goal of this study was to make more efficient use of Ligularia fischeri which has both medical and cooking applications after freezing and drying. We manufactured Sulgidduk containing 0, 2, 4, 6 and 8% of Ligularia fischeri powder. Chemical analysis showed that Ligularia fischeri powder contained, 5.77% water, 19.97% crude protein, 1.89% crude fat, 13.12% crude ash, and 9.73% crude fiber. The water content of Sulgidduk to which Ligularia fischeri was added ranged from 37.72~40.20%. As more Ligularia fischeri was added, the L value and 'a' value increased, while the 'b' value did not significantly change. Optimal preference was for a 4% content of added Ligularia fischeri powder. Based on the results of this experiment, Sulgidduk manufactured with added Ligularia fischeri powder showed less hardness than the control group throughout a period of storage, and adequate addition of Ligularia fischeri powder can effectively enhance the storability of Sulgidduk containing Ligularia fischeri.

Improvement of Multiply Board Properties with Starch Spraying (전분 분무기술을 통한 다층지의 물성개선)

  • Lee, Hak-Lae;Ryu, Jeong-Yong
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.39 no.3
    • /
    • pp.12-23
    • /
    • 2007
  • Frequently spraying of natural starch slurry onto the formed wet web has been adopted to improve properties of paperboards. This conventional starch spraying technique, however, becomes less effective in strength improvement. In this study the effects of various factors including wet web dryness, quantity of starch slurry sprayed, and drying temperature on paperboard properties were investigated. Migration of starch granules into the webs appeared to cause a reduction in plybond strength when the web dryness was lower than this level. Wet webs should contain enough water to swell the starch granules, and at the same time they should be heated to a temperature high enough for complete cooking of the sprayed starches to occur. This suggested that preheating of the wet web can be employed to improve the plybond strength.

Effect of Different Preservation Methods on Physicochemical Quality of Beef

  • Akter, H.;Akhter, S.;Rahman, S.M.E.;Rahman, M.M.;Hossain, M.M.;Ra, C.S.;Kim, Jai-Moung;Oh, Deog-Hwan
    • Journal of Food Hygiene and Safety
    • /
    • v.24 no.3
    • /
    • pp.217-225
    • /
    • 2009
  • The study was conducted to evaluate the effect of drying, curing and freezing on the quality of beef. Three types of dried (without salt = $T_1$, with salt = $T_2$ and salt + spices = $T_3$); three types of cured (salt curing = $T_4$, sugar curing = $T_5$ and brine curing = $T_6$) and three types of frozen beef ($0^{\circ}C=T_7^{\circ}C$, $-10^{\circ}C=T_8$ and $-20^{\circ}C=T_9$) were analyzed at different time intervals up to the period of 180 d. Parameters studied were protein, fat, ash, color and cooking loss of beef. All the chemical constituents (protein, fat and ash) were decreased gradually up to 120 d. The decreasing trend was observed rapid after 120 d up to 180 d of preservation. Highest protein loss was found in $T_7$ (11.1 %) and the lowest protein loss was found in $T_6$ (3.85%) in 180 d preservation and significant (p < 0.01) differences were observed among the different preservation methods. Highest fat loss was observed in $T_6$ (7.62%) and the lowest fat loss was observed in $T_2$ (3.18%) and the differences were also significant (p < 0.05) among different methods during the experimental period. Spices dried beef showed a brighter color than others and cured beef showed brown color and the intensity of color was reduced gradually with the increasing of storage period. $T_9$ showed the lowest cooking loss among 3 treatments of frozen beef and the differences also significant (p < 0.01) up to 180 d. It might be stated that sugar curing ($T_5$) and spices drying ($T_3$) would be the useful technique of meat preservation in rural areas and freezing ($T_9$) would be used in large scale preservation at urban areas.

Functional Characteristics of Job's-tears Flakes Subjected to Varying Degree of Heating (율무 flake 제조시 가열정도에 따른 특성)

  • Lee, Young-Tack;Seog, Ho-Moon;Kim, Sung-Soo;Hong, Hee-Do;Kim, Kyung-Tack
    • Korean Journal of Food Science and Technology
    • /
    • v.27 no.5
    • /
    • pp.640-645
    • /
    • 1995
  • Job's-tears(Coix lachryma-jobi L. var. Ma-yuen Stapf) seeds were processed to flakes by soaking, heat treatment, intermediate-moisture drying, flaking, drying, and cooking. Some functional properties of job's-tears flakes subjected to varing degree of heating were characterized by specific volume, texture, water absorption index(WAI), water solubility index(WSI), and viscosity. As degree of gelitinization increased within the intermediate range of $60{\sim}70%$, steam-cooked Job's-tears demonstrated appropriate rheological properties for further processes, resulting in increased specific volume and decreased breaking strength. However, excessive heat treatment rendered Job's-tears undesirably sticky for flaking, which caused adverse effects on the functional properties of flakes such as specific volume and breaking strength. Increasing steaming time$(5{\sim}30\;min)$ caused an increase in WAI and WSI values. Apparent viscosity of powdered flakes was increased with the extent of gelitinization as a function of heat processing. Viscosity of powdered flakes determined using the amylograph increased with the degree of heating applied to Job's-tears at low pasting temperatures, accompanied by a decrease in maximum viscosity as the pasting temperature increased.

  • PDF

Influence of Curing Methods on Compressive Strength and Shrinkage of High Strength Mortar with High Volume SCMs (양생방법 변화가 혼화재 다량치환 고강도 모르타르의 압축강도 및 수축변화에 미치는 영향)

  • Han, Cheon-Goo;Baek, Cheol
    • Journal of the Korea Institute of Building Construction
    • /
    • v.18 no.1
    • /
    • pp.33-40
    • /
    • 2018
  • Currently, in South Korea, because of reducing the construction period or treating wasted water, there are some cases of missing wet curing for concrete structure even though for high strength concrete. This air curing conditions is considered to cause increased possibility of compressive strength decrease, and increasing drying or autogenous shrinkages. As a solution of shrinkage of concrete, The authors' research team conducted the research on improving durability of concrete with decreasing autogenous shrinkage by adding the oil or fat to induce the saponification. Therefore, in this research, the influence of curing method on compressive strength, shrinkage on evaporation rate of high strength mortar including high volume supplementary cementitious materials (SCMs) was evaluated depending on various curing methods such as air curing, drying after painting emulsified refined cooking oil (ERCO), and drying after 7 and 28 days' wet curing. The experimental result showed the air curing method caused approximately 50% of decreased compressive strength and 1.9 times of increased shrinkage rather than the 28-day-wet curing method, thus it was known that the wet curing significantly influences on performance of high strength mortar using high volume SCMs. However, the ERCO painting curing caused decreased performance of concrete rather than drying after 7 days curing while it caused improved performance of concrete than entire period air curing.

A Study on the Cooking in 'The Ryuk-Jab-Rok' ("역잡록"의 조리가공에 대한 분석적 고찰)

  • 김성미;이성우
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.3 no.1
    • /
    • pp.12-17
    • /
    • 1993
  • This book is named 'The Ryuk-Jab-Rok' because it was written in the last page of 1820's almanac. This book is written purely in Korean and has not been published yet. This book comprises twenty eight items, among which there are eight items of vegetable preserving method, ten items of Jook preparation methods(a kind of cereal soup), nine items of Pyun-Myun methods(a kind of rice cakes and noodles) and Yak-Bab(a kind of spiced rice). In vegetable preserving method, the eggplant, the cucumber and a songi mushroom were preserved with the drying method., A radish, a sorojangii, and the root of white cabbage were used with the cold temperature preservation. A garlic was dried after salting. The sprouts of DooRub, which were coming in the hot room, were used. In the Jook preparations, there were five animal materials which were lamb, chick, crudian, oyster and abalone. In nine Pyun-Myun methods, Jap-Gua-Sil was illegible because the letters were not clear. Among eight items, the stick rice was used in four cases, the regular rice in two cases. The ground pine nuts, honey and the Chinese date were used most ofter. And the sesame salt and the chestnut were next. The analysis of the terms I this book revealed that 26 items were used for cooking processes. And it also showed us that there were seven kind of cutting procedure and eight kinds of heating procedure. The shapes and size of foods were revealed at only three places in all items. The one-chi(chi ; abut three cm) and three-Ja(Ja ; about thirty cm) which the terms represent the length were revealed twice and once respectively in this book. In the taste description, 'the good', the most common word, was used in seven times, and which was the most frequently introduce case. The measuring unit is hard to revive since the measurements were taken by the container, which were Jong-Ja, Sabal and Tang-gii, then in use. Fifteen kinds of containers and cookers were used for preparing foods. And all of them are now I use.

  • PDF

Browning and Moisture Sorption Characteristics of Rubus coreanus Prepared by Different Drying Methods (건조방법에 따른 복분자 분말의 갈변 및 흡습 특성)

  • Chung, Hun-Sik;Seong, Jong-Hwan;Lee, Young-Guen;Kim, Han-Soo;Lee, Joo-Baek;Youn, Kwang-Sup
    • Food Science and Preservation
    • /
    • v.16 no.6
    • /
    • pp.797-803
    • /
    • 2009
  • The effects of drying methods on the browning and moisture sorption characteristics of Rubus coreanus were studied. Fruits were steamed for 5 min at $100^{\circ}C$, dried by sun drying, infrared drying, or freeze drying, and powdered to a size of 20 mesh. Color values were measured and equilibrium moisture contents (EMC) were determined at $20^{\circ}C$, over a range of water activity ($a_w$) from 0.11 to 0.90. The browning indices $L^*$ and $a^*$ values were higher and lower, respectively, in freeze-dried Rubus coreanus compared with other samples. The $b^*$ value was greatest in freeze-dried Rubus coreanus. EMC tended to increase with increasing $a_w$ values, and a particularly sharp increment was observed above 0.75 $a_w$. The EMC of freeze-dried Rubus coreanus was significantly higher compared with the EMC of sun-dried and infrared-dried fruit at constant aw. The moisture sorption isotherms showed a typical sigmoid shape, and the Halsey, Kuhn, and Oswin models were the best fits for the sun-dried, infrared-dried, and freeze-dried powder isotherms, respectively. With respect to monolayer moisture content, the Guggenheim-Anderson-Boer (GAB) equation showed that the various drying methods yielded very different results, with monolayer moisture contents of 0.005 g $H_2O/g$ dry solid in infrared-dried and 0.019 g $H_2O/g$ dry solid in sun- and freeze-dried powders, respectively. These results indicate that the drying method affects the browning and moisture sorption characteristics of Rubus coreanus.