• Journal of Food Hygiene and Safety
• /
• v.13 no.4
• /
• pp.425-429
• /
• 1998

Three pork fabrication processing were examined for isolation and serotyping of Listeria monocytogenes. Three hundred thirty samples were collected from gloves, knife sharpeners, knives, cutting boards, conveyer belts, skinning machines, working room air, pig carcasses, and cut meat. Among the 234 samples taken from processing environment, the isolation rates of Listeria monocytogenes and other Listeria spp. were 17.5%, 34.2% respectively. Isolation rates of Listeria monocytogenes from different specimens during processing were 20.8% in gloves, 21.3% in knife sharpeners, 14.6% in knives, 20.8% in cutting boards, 28.6% in conveyer belts, 16.7% in skinnig machines. Listeria monocytogenes and other Listeria spp. were not detected in working room air. Isolation rate of Listeria monocytogenes 14.6% in pork was increased compared to that of 8.5% in pig carcasses (p<0.05). The serovars of 41 isolates from processing environment were 4b 36.6%, 1/2a 24.4%, 4ab 17.0%, 4a 4.9%, 1/2c 2.4%, and 4c 2.4%. The serovars of 4b, 1/2a, 4ab were detected from carcassess and cut meats.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2975-2981
• /
• 2014

Micro-magnetic detection system is used to detect small particles in an automatic transmission valve body, which signal noise and time-delay may occurs in process of signal transmitting and filtering. In this paper, we present the design and implement of a micro-magnetic detection system based on wireless sensor networks in conveyer belt. Micro-magnetic detection system consists of five modules which are magnetic sensor detector, signal processing unit, wireless sensor networks, system control unit and system monitoring unit. Our experimental results show that the proposed wireless micro-magnetic detection system improves both accuracy and time delay compared to the wired system; therefore, it may apply for wireless micro-magnetic detection system by analysis of packet reception rate.

• Journal of Ship and Ocean Technology
• /
• v.6 no.3
• /
• pp.1-12
• /
• 2002

In this paper the results are reported of sixty-nine lateral collision tests, which were performed to investigate the collision resistance of plates. For the tests a collision testing machine of spring-roller conveyer type was designed and fabricated. Using this machine, various plates were tested with different masses and velocities and various headers of the striker. A simple analytical method has also been developed to predict the extent of damage of struck plates due to lateral collision. In the method, it is assumed that the kinetic energy of the striker can be dissipated by the formation of yield lines and membrane tensions in the impacted plate. The calculated predictions of extent of damage using the developed method have been substantiated with the test results, which shows reasonably acceptable correlations.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1931-1936
• /
• 2007

The application of high velocity air jets to heat transfer surface has tremendous engineering potential in various industries. The impinging jets are therefore widely used for their enhanced transport characteristics, especially for drying of continuous materials such as sheet, film, carpets, forming materials and pallets. This paper presents the drying characteristics of plate type material and performs the test with the change of operating conditions in conveyer band dryer using the impinging jet nozzles. The factors influencing drying rate were confirmed, also the design data of band dryer using the impinging jet was obtained.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.123-132
• /
• 2008

This study try introduce a cell manufacturing form and to make the productivity in a conveyor line manufacture for the customer requirement and market change. The case research from JIT theory that made the model to make a productivity enhance through the cell line in a conveyor line and U-line. This research was subject with a cosmetics manufacture company, therefor we can raise the quality enhance, personnel expenses and reduction of delivery effectiveness in a stroke types of industry consequently.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.391-394
• /
• 2001

A new type plasma reactor is proposed to decompose CF4 diluted with N2 gas in atmospheric pressure. The arc plasmas is surrounded with a waterwall which acts as a source of water vapor, the solvent of HF, resultant product after decomposition, and conveyer to take away fluorine compound from exhaust gas. Abatement more than 99% is achieved by small size plasmas such as 1 cm in diameter, 25cm in length and 3.4KW of DC discharge power in such gas as the mixture of 100 sccm of CF4 and 15 slm of N2. Reactors of this type are to be expanded to such a system as Nitrogen flow of 50 slm with 200 sccm of CF4 and 7-8 KW discharge power.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.262-267
• /
• 2013

This paper describes a vision based automation case study for the tire tread extruder line. To accurately measure the thread widths, two cameras with laser line illumination have been installed near the takeaway conveyer. The overall tread extruder line is then automated by controlling the speeds of take away conveyor and screw motor such that a difference between measured widths and the targeted data is minimized. By doing this, the conventional tread extruder line has been replaced by the developed automated computer system and with only one operator, increasing the production efficiency and reducing safety accidents.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1001-1005
• /
• 2004

The objective of this paper is to develop the flexible manufacturing system (FMS), which is cooperated with the automatic warehouse and inventory control under holonic manufacturing system (HMS). The HMS is a next wave of manufacturing revolution to deal with dynamic changing. The architecture of HMS is developed for cooperation system between the automatic warehouse agents and the manufacturing agents. This research applies the concept of HMS to develop a distributed control system for automatic warehouse and FMS by industrial network. The parts of prototype manufacturing agents consist of the conveyer system and 3-axises robot that provide the variety patterns in order to work as punch process. Each order of productions depends on the reorder points(RP) of inventory levels. The computation results indicate an improvement by comparing with traditional centralized control.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.149-154
• /
• 2004

In the semiconductor and the optical industry a new transport system which can replace the conventional sliding system is required. These systems are driven by magnetic field and conveyer belt. The magnetic field damages semiconductor and contact force scratches the optical lens. The ultrasonic wave driven system can solve these problem. In this paper, the relationship of transporting speed according to the change of flexural beam shape and the effect of transporting speed according to the change of weight and amplification voltage are verified. The vibration behavior of flexural beam in the ultrasonic transport system is experimented using Laser Scanning Vibrometer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1241-1246
• /
• 2007

In recent years, the semiconductor industry and the optical industry are developed rapidly. The recent demands have expanded for optical components such as the optical lens, the optical semiconductor and the measuring instrument. Object transport systems are driven typically by the magnetic field and the conveyer belt. Recent industry requires more faster and efficient transport system. However, conventional transport systems are not adequate for transportation of optical elements and semiconductors. The conveyor belts can damage precision optical elements by the contact force and magnetic systems can destroy the inner structure of semiconductor by the magnetic field. In this paper, the levitation transport system using ultrasonic wave is developed for transporting precision elements without damages. The steady state flexural vibration of the beam is expressed using Euler-Bernoulli beam theory. The transport direction of an object is examined according to phase difference and frequency. The theoretical results are verified by experiments.