• 공학논문집
• /
• 제2권1호
• /
• pp.23-30
• /
• 1997

본 논문은 배치기와 변환기의 두 개의 서브시스템으로 구성된 계층적 인터페이스 시스템과 GROCO 모델을 기반으로하여 이의 후속 연구로서 계층적 인터페이스 시스템의 실제 운영에 있어 좋은 기능을 제공하고자 버젼 관리 시스템을 제안하고자 한다. 제안된 버젼 관리 시스템은 갱신 전파 기능을 조정하고, 버전의 중요 성질인, 서로 다른 정보를 가질 수 있으나 인터페이스의 공유성을 유지하기 위해 어트리뷰트를 불변성, 변경, 변경없는 어트리뷰트로 분류하였다. 또한 갱신성의 성질과 정도에 따라 버전들을 두 개의 단계로 구분하였으며 이 곳에서 버젼의 기능을 유지 시키면서 변화를 제공하기 위해 연산들과 그 연산의 규칙을 제공한다. 또한 실제 오브젝트에서 버전화된 오브젝트들의 전개과정을 나타내기 위해 버젼 모델링 그래프를 제시하였다.

• 디지털융복합연구
• /
• 제10권10호
• /
• pp.313-318
• /
• 2012

본 논문에서는 X-band 대역용 인체감지센서에 적용될 저 잡음 송수신기 설계 방법을 제안 하였다. 제안된 송수신기에는 기존 송수신기의 출력 신호가 수신 단으로 유입되는 것을 줄이기 위한 회로가 추가되었다. 잡음 제거회로는 분배기와 $90^{\circ}$위상 천이기를 포함하는 Hittite HMC908LC5(I/Q down converter)가 사용되었다. 송수신기 회로와 안테나는 CST MWS를 사용하여 시뮬레이션 하였고 FR-4 기판(h=1.0mm, ${\varepsilon}_r$=4.4)을 사용하여 제작하였다. 설계된 안테나의 특성이 인체감지용 센서에 사용되기에 적합하며 제안된 송수신기와 기존에 사용되고 있는 송수신기의 출력 특성을 비교 한 결과 동등한 특성을 얻었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.239-241
• /
• 2008

A powered system with fuel cell is regarded as a high current and low voltage source. Effects of the loads on the electrical power source are important to optimize the integrated power system. The design parameters of the system should be chosen by taking into account the characteristics of the fuel cell, so the costs of the power system at given operating conditions can be reduced. Furthermore, the dynamics characteristic of the system is crucial to acquire performance in applications, particularly interactions between loads and the fuel cell system. Currently, no integrated simulation has been approached to analyze interrelated effects. Therefore, the dynamic models of power conversion system with a PEM fuel cell that includes the PEM fuel cell stack, DC/DC converter and associated controls is developed. Electric lads for the system are derived by using a power theory that separates a load current into active, reactive, distortion or a mixed current component. Dependency of the DC capacitor on the loads are analyzed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.139-143
• /
• 2001

Recently, the interest on power quality has been hot issue. The equipments cause voltage disturbance and has become more sensitive to the voltage disturbance. This paper deals with 5-Level H-Bridge Line-Inter active Dynamic Voltage Restorer(LIDVR) system. The LIDVR has following advantages in comparison with the DVR with series injection transformer It has the power factor near to unity under normal source voltage, can compensate the harmonic current of the load and the instant interruption, and has the fast response. First, the construction, the operation mode and algebraic modeling of LIDVR are reviewed. And then a voltage controller is proposed to get sinusoidal load voltage with constant amplitude. To find PWM method suitable for H-Bridge converter, two PWM methods are compared and analyzed. Finally, simulation results verify the proposed 5-level H-Bridge LIDVR system.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1483-1493
• /
• 2016

Multiple parallel inverters have multiple resonant frequencies that are influenced by many factors. This often results in stability and power quality problems. This paper develops a multiple input multiple output model of grid-connected inverter systems using a closed-loop transfer function. The influence factors of the resonant characteristics are analyzed with the developed model. The analysis results show that the resonant frequency is closely related to the number, type and composition ratio of the parallel inverters. To suppress resonance, a scheme based on virtual impedance is presented, where the virtual impedance is emulated in the vicinity of the resonance frequency. The proposed scheme needs one inverter with virtual impedance control, which reduces the design complexity of the other inverter controllers. Simulation and experimental tests are carried out on two single phase converter-based setups. The results validate the correctness of the model, the analytical results and the resonant suppressing scheme.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.175-181
• /
• 2015

In this study, a lithium polymer battery (LiPB) is simply expressed by a primary RC equivalent model. The PI state observer is designed in Matlab/Simulink. The non-linear relationship with the OCV-SOC is represented to be linearized with 0.1 pu intervals by using battery parameters obtained by constant-current pulse discharge. A state equation is configured based on battery parameters. The state equation, which applied Peukert's law, can estimate SOC more accurately. SOC estimation capability was analyzed by utilizing reduced Federal Test Procedure (FTP-72) current profile and using a bi-directional DC-DC converter at temperature ($25^{\circ}C$). The PI state observer, which is designed in this study, indicated a SOC estimation error rate of ${\pm}2%$ in any of the initial SOC states. The PI state observer confirms a strong SOC estimation performance despite disturbances, such as modeling errors and noise.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2004-2012
• /
• 2014

Energy storage devices are necessary to obtain stable utilization of renewable energy sources. When black-out occurs, distributed renewable power sources with energy storage devices can operate under standalone mode as uninterruptable power supply. This paper proposes a dynamic response analysis with small-signal modeling for the standalone operation of a photovoltaic power generation system that includes a bidirectional charger/discharger with a battery. Furthermore, it proposes a DC-link voltage controller design of the entire power conditioning system, using the storage current under standalone operation. The purpose of this controller is to guarantee the stable operation of the renewable source and the storage subsystem, with the power conversion of a very efficient bypass-type PCS. This paper presents the operating principle and design guidelines of the proposed scheme, along with performance analysis and simulation. Finally, a hardware prototype of 1-kW power conditioning system with an energy storage device is implemented, for experimental verification of the proposed converter system.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.110-119
• /
• 2008

Computer methods with simplified mathematical models in conjunction with empirical model parameters can be efficiently practiced into an optimization of a diesel aftertreatment system. Components of prime interests are diesel particulate filter, diesel oxidation catalyst and de-$NO_x$ catalytic converter. de-$NO_x$, de-PM, and de-HC processes in each part are individually modeled, formulated and then combined into an integrated analysis procedure for a unified simulation of the diesel emission aftertreatment. The model is empirically tuned and validated with comprehensive engine and laboratory data. The effects of emission species and space velocity on the $NO_x$ and soot reductions are parametrically investigated. A lowered $NO_2/NO_x$ ratio due to PM oxidation in DPF contributes to promote the $NO_x$ reduction by SCR at intermediate gas temperatures. $NO_x$ reduction is inert to the PM oxidation at high temperatures. Rate of PM trapping strongly depends on temperature and $NO_x$ concentration.

• 한국산학기술학회논문지
• /
• 제15권12호
• /
• pp.7385-7392
• /
• 2014

본 연구는 도로분야의 표준 정보모델 구축을 목표로 하고 있으며 도로 부대시설을 대상으로 IFC 스키마를 확장 개발하였다. 국내 도로설계 관련 문헌 분석을 통해 도로 부대시설을 구성하는 요소를 도출하였으며, 이를 통해 IFC스키마의 엔티티, 타입, 프로퍼티를 정의하여 스키마를 확장 개발하였다. 또한 새로운 스키마를 수용하는 컨버터와 뷰어를 개발하여 부대시설 BIM 모델을 IFC모델로 변환하여 연구결과를 검증하였다. 개발된 스키마를 통해 변환된 표준 모델을 활용할 경우 도로분야 BIM 발주시 표준화 된 모델 기반의 납품 및 검증이 이루어질 수 있으며, 설계단계 뿐만 아니라 시공, 유지관리 단계까지 IFC를 활용하는 토목분야 개방형 BIM 체계를 구축할 수 있을 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.239-241
• /
• 2000

This paper describes a modeling of a FACTS(Flexible AC Transmission System) device, namely, SSSC(Static Synchronous Series Compensator) model. The SSSC, a solid-state voltage source inverter coupled with a transformer, is connected in series with a transmission line. SSSC provides controllable compensating voltage, which is in quadrature with the line current, over an capacitive and an inductive range, independently of the magnitude of the line current. This SSSC model is obtained from the injection model for series connected VSC(Voltage Source Converter) by adding a constraint that the injected voltage should be in quadrature with the line current. The paper discusses the basic operating and performance characteristics of the SSSC, and power flow control in power system.