• Publications of The Korean Astronomical Society
• /
• v.12 no.1
• /
• pp.1-21
• /
• 1997

We have obtained theoretical calibration curves to convert the amount of polarization into the strength of magnetic field, by a numerical calculation of radiation transfer for the polarized spectral line of FeI $6303{\AA}$. In our calculation, three kinds of atmospheric models (VAL-C, penumbra, umbra) have been used to make a proper calibration for an active region composed of quiet, penumbral and umbral areas. It was found that firstly, the results of our calculation depend highly on a kind of atmospheric model rather than on any other input parameters used in a model. Secondly, observed line profile showed m solar spectrum atlas proved to be very similar to the calculated profiles obtained by using a penumbra model. Finally, another method except this calibration curve should be developed to estimate correctly the distribution of magnetic field in solar active region from the observation of polarized spectral line.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1304-1306
• /
• 1995

In this study, a neural network algorithm through a data standardization method was developed to discriminate the phase-shifted partial discharge(PD) patterns such as a $\phi$-q-n pattern. Considering the PD measurement in the field, it is not so easy to acquire absolute phase angles of PD pulses. As a consequence, one of the significant problems to be solved in applying the neural network algorithm to practical systems is to develop a method that can discriminate phase-shifted $\phi$-q-n patterns. Therefore, authors established a new method which could convert phase-shifted $\phi$-q-n patterns to a standardized $\phi$-q-n pattern which was not influenced by phase shifting. This new standardization method improved the recognition performance of a neural network for the phase-shifted $\phi$-q-n patterns considerably.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.122-128
• /
• 2003

In this paper, a 16${\times}$16-bit Multiplier and Accumulator (MAC) is designed using a Redundant Binary Adder (RBA) circuit so that it can make a fast addition of the Redundant Binary Partial Products (RB_PP's) by using Wallace-tree structure. Because a RBA adds two RB numbers, it acts as a 4-2 compressor, which reduces four inputs to two output signals. We propose a method to convert the Redundant Binary (RB) representation into the 2's complement binary representation. Instead of using the conventional full adders, a more efficient RB number to binary number converter can be designed with new conversion method.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.660-665
• /
• 2011

In this paper we investigated a variety of candidate trains in KORAIL and Seoul Metro Corp. for an experimental driving which would be in the prosecution of making functional and performance experimentation for the specified manual by this project. We examined many preliminary out-of-service trains and some kinds of spare trains to secure two composition of test-trains for CBTC evaluation and studied a remaking scheme to convert control vehicles of these trains to CBTC-functioned ones to choose a most suitable ones of them, so we will be make traveling tests on the test railroad with them.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3124-3132
• /
• 2011

Scott transformers have widely used to convert three phases into two phases and compensate the unbalance. Theoretically, the loads of the two secondary phases are same, no unbalance appears in the PCC(point of common coupling). But Due to the uncertainty of traction load, the unbalance are generally presented at the PCC. In this paper The amount of the voltage unbalance is expressed in the ratio of the negative sequence voltages to the positive sequence voltage. We tried to compensate the unbalance using SVC(Static Var Compensator）in an unbalance traction loads state by modeling. The SVC are installed and controlled to provide different amounts of reactive power compensation.

• Communications for Statistical Applications and Methods
• /
• v.19 no.4
• /
• pp.527-536
• /
• 2012

In this paper we analyze the effect of circular variables such as wind direction, time and month on the ozone level. In particular, we examined the effect of wind direction by exploratory data analysis methods and provide the correlation and regression analyzes in the cases including all circular explanatory variables. In the analysis, we convert time and month variables to circular variables and analyze the effect of these variables on regression analysis; in addition, we also consider circular-circular regression. We used weather condition and air pollution data collected from Dongdaemoon district of Seoul in 2007.

• Journal of Digital Convergence
• /
• v.11 no.2
• /
• pp.193-203
• /
• 2013

In our thesis we introduce case study for qualifying university graduates system for efficient maintenance. First, we find out factors to make maintenance difficult and present solution for them. Second, we convert system architecture from algorithm-oriented to driving-engine-based, design DB schema, develop algorithms for important components of proposed system, and implement them. Through results of system operation, we show that our system can reduce maintenance cost fairly.

• Structural Engineering and Mechanics
• /
• v.7 no.2
• /
• pp.217-224
• /
• 1999

A semi-stochastic process model of reliability was established for hyperbolic cooling towers subjected to combined loadings of wind force, self-weight, temperature loading. Effect of the soil-structure interaction on reliability was evaluated. By involving the gust factor, an equivalent static scheme was employed to convert the dynamic model to static model. The TR combination rule was used to consider relations between load responses. An analysis example was made on the 90M cooling tower of Maoming, Guangdong of China. Numerical results show that the design not including interaction turns to be conservative.

• Journal of architectural history
• /
• v.23 no.4
• /
• pp.69-80
• /
• 2014

The purpose of this paper is to examine the dissolution process of Dongnae-bu Dongheon Block(東萊府 東軒 一廓) under the Rule of Japanese. The results of this study are summarized as follows. First, the space orgnization of Dongnae-bu Dongheon Block(東萊府 東軒 一廓) proved to be clear on the basis of Dongnae-bu Eupji(東萊府 邑誌), the ficture of Dongnae-bu(東萊府) and the Original Land Registration Map(地籍原圖) at the end of Joseon Dynasty. Second, the old government offices, as well as Chungsin-dang(忠信堂), were converted into the local government office for the sake of Japanese colonialism. Third, the old government office and its land were transferred to the banking system(金融組合) and the educational foundation(學校組合) in the interests of Japanese colonist. Finally, the transfer land of civilian industry association forced Mangmi-ru(望美樓) and Dokjin-daeamun(獨鎭大衙門) to remove to another site and the private lots-subdivision assisted space taking to pieces.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.479-486
• /
• 2016

In this paper, the algorithm which can convert a 2D image into a 3D Model will be discussed. The 2D picture drawn by a user is scanned for image processing. The Canny algorithm is employed to find the contour. The waterfront algorithm is proposed to find foreground image area. The foreground area is segmented to decompose the complex shapes into simple shapes. Then, simple segmented foreground image is converted into 3D model to become a complex 3D model. The 3D conversion formular used in this paper is also discussed. The generated 3D model data will be useful for 3D animation and other 3D contents creation.