• 제목/요약/키워드: convergence section

검색결과 475건 처리시간 0.032초

PATTERSON-SULLIVAN MEASURE AND GROUPS OF DIVERGENCE TYPE

  • Hong, Sungbok
    • 대한수학회보
    • /
    • 제30권2호
    • /
    • pp.223-228
    • /
    • 1993
  • In this paper, we use the Patterson-Sullivan measure and results of [H] to show that for a nonelementary discrete group of divergence type, the conical limit set .LAMBDA.$_{c}$ has positive Patterson-Sullivan measure. The definition of the Patterson-Sullivan measure for groups of divergence type is reviewed in section 2. The Patterson-Sullivan measure can also be defined for groups of convergence type and the details for that case can be found in [N]. Necessary definitions and results from [H] are given in section 3, and in section 4, we prove our main result.t.

  • PDF

구급차 내에서 수행한 구급대원의 정맥로 확보에 관한 융합연구 (Convergence study on the intravenous access of paramedics in ambulances)

  • 김진현;심규식
    • 한국융합학회논문지
    • /
    • 제8권11호
    • /
    • pp.177-182
    • /
    • 2017
  • 본 연구의 목적은 구급차의 주행조건에 따른 구급대원의 정맥로 확보 시도 횟수를 분석하여 신속한 정맥로 확보를 위한 주행 기준을 제시하고, 실험 전 후 자신감 변화를 비교해 구급대원의 정맥로 확보 자신감을 높이는데 있다. 연구기간은 2017년 5월 18일부터 27일까지이고, 연구 대상은 119 구급대원 30명(1급 응급구조사 20명, 간호사 10명)으로 구급차 주행 조건을 6가지(정차 구간, 평지 구간, 비포장 구간, 과속 방지턱 구간, 곡선 구간, 경사로 구간)로 설정하여 정맥로 확보 시도 횟수를 측정하였다. 연구결과 정차 구간과 평지 구간 주행조건에서는 시도 횟수차이가 없었고(p=.161) 비포장(p=.003), 과속 방지턱(p=.005), 곡선(p=.022), 경사로(p=.003)구간 주행조건에서는 모두 유의한 차이가 발생했다. 실험 전 후 자신감은 실험 후 자신감이 유의하게 상승(p=.000)한 것으로 나타났다. 결론적으로 주행 중 구급차 내에서의 신속한 정맥로 확보를 위해서는 차량을 정차시키거나 평지를 주행할 때 시도하는 것을 권장하며, 지속적인 훈련을 통해 정맥로 확보 자신감을 유지시켜야 할 것이다.

아시아 국가들 환경오염배출량의 확률수렴성과 환경쿠즈네츠곡선가설 검정 (The Test of Stochastic Convergence of Environment Emission and Environmental Kuznets Curve Hypothesis in Asian Developing Countries)

  • 김지욱
    • 자원ㆍ환경경제연구
    • /
    • 제19권3호
    • /
    • pp.571-595
    • /
    • 2010
  • 본 연구는 1971년~2007년까지 아시아 11개국에 대한 일인당 상대(relative per capita) $CO_2$배출량의 확률적 수렴성(stochastic convergence)을 검정하고 일인당 상대 GDP와의 환경쿠즈네츠곡선(Environmental Kuznets Curve: EKC)가설을 검정하고자 하였다. 본 분석을 위하여 다중의 내생적 구조변화(multiple structural breaks)를 허용하고 횡단면 주체간 의존성(cross-sectional dependence)을 고려하는 Carrion-i-Silvestre et al. (2005)의 패널정상성검정(panel stationarity test)과 Banerjee and Carrion-i-Silvestre (2006)과 Westerlund and Edgerton (2007)의 패널공적분(panel cointegration) 검정 방법 등을 사용하였다. 분석 결과 아시아 국가들에서의 일인당 상대 $CO_2$배출량에서 장기 그룹평균 수준으로 확률적 수렴이 이루어지고 있었고 일인당 상대 GDP와의 사이에 공적분관계가 성립하였지만 EKC 가설의 존재를 발견하지 못하였다. 경제성장 발전에 우선적으로 정책을 집행하고 있는 아시아 국가에서는 오염배출량 감소보다 증가하는 국가들의 영향력이 크게 나타나 EKC 가설이 성립하지 않는 것으로 나타났다.

  • PDF

WB(Water-Bubble) 기반의 강한 보안성을 갖는 탄력적 네트워크 구간에 관한 연구 (A Study on WB(Water-Bubble) Based Highly Secure Flexible Network Section)

  • 서우석
    • 한국전자통신학회논문지
    • /
    • 제12권5호
    • /
    • pp.737-746
    • /
    • 2017
  • 2017년 통합보안(IS, Integrated Security), 융합 보안(CS, Convergence Security) 등과 같은 새로운 보안시장의 변화 속에서 운영과 관리 차원의 다양한 보안 패러다임이 제시되고 있다. 이러한 솔루션과 기술은 현존하는 네트워크 인프라의 변경과 유동적인 다차원적인 변화를 이끌어 내기보다는 보안성을 높이는 1차원적인 방어에 모든 보안 역량이 집중되어짐으로써 예상치 못한 침해와 장애를 지속적으로 내제하고 있는 네트워크 인프라를 유지해 오고 있다. 따라서 WB(Water-Bubble)이라는 새로운 아이디어를 네트워크 인프라에 접목하고 실험과 구현 기반의 분석을 진행함으로써 유사패턴 공격과 집중화 트래픽 공격을 방어할 수 있는 탄력적 네트워크 구간을 제안하고 개발할 수 있는 기회이기도 한다. 또한 본 논문에서 제안하는 WB 기반의 강한 보안성을 갖는 탄력적 네트워크 구간에 관한 연구기법은 공격의 최종 목적지로 예상되는 네트워크 영역을 울림형태의 탄력적 영역변화를 갖는 네트워크 구간(구역)으로 유동성과 비예측성, 상호 접점비율에 따른 비 영역 확장성 등의 3대 주요 제한 및 보안 기준을 바탕으로 네트워크 구간 보안성 확보를 위한 연구 자료를 제공하고자 한다.

도시가스 매설이중배관 건전성 향상에 관한 실험적 연구 (An Experimental Study on the Improvement of City Gas Buried Double Piping Integrity)

  • 임형덕
    • 한국산업융합학회 논문집
    • /
    • 제23권5호
    • /
    • pp.757-763
    • /
    • 2020
  • City gas buried pipes are managed by corrosion protection to prevent corrosion. In the case of the press-in section, the double pipe and the main pipe may cause corrosion under the influence of stray current, which can shorten the life of the pipes. In addition, if the insulator is filled in the press-in section, the press-in section itself is a single structure, and can be directly affected by external impact, and when the surrounding ground subsidence occurs, the stress may be concentrated, resulting in serious consequences. In this study, a serration-type shock absorber in the form of a sliding support was proposed as a new buried double piping construction method using EPS. The serration-type shock absorber can contribute to the improvement of the integrity of the buried double piping, as it can utilize the gas piping's own ductility and stress distribution characteristics with proper anti-corrosion management and shock-absorbing material properties by preventing contact inside the buried double pipe. However, for application to ground piping, there remains a task to supplement the vulnerability against fire due to the characteristics of EPS materials.

SI 열화학 수소 생산 공정 요오드 결정화기 열-물질 수지 계산 (Calculation of Mass-Heat Balance on the Iodine Crystallizer for SI Thermochemical Hydrogen Production Process)

  • 이평종;박병흥
    • 융복합기술연구소 논문집
    • /
    • 제5권1호
    • /
    • pp.1-5
    • /
    • 2015
  • SI thermochemical hydrogen production process achieves water splitting into hydrogen and oxygen through three chemical reactions. The process is comprised of three sections and one of them is HI decomposition into $H_2$ and $I_2$ called as Section III. The production of $H_2$ included processes involving EED for concentrating a product stream from Section I. Additionally an $I_2$ crystallization would be considered to reduce burden on EED by removing certain amount of $I_2$ out of a process stream prior to EED. In this study, the current thermodynamic model of SI process was briefly described and the calculation results of the applied Electrolytes NRTL model for phase equilibrium calculations was illustrated for ternary systems of Section III. We calculated temperature and heat duty of an $I_2$ crystallizer and heat duty of heaters using UVa model and heat balance equation of simulation tool. The results were expected to be used as operation information in optimizing HI decomposition process and setting up material balance throughout SI process.

도로 공사중의 교통영향권역 설정 및 적용성에 관한 연구 (A Study on the Traffic Effect Zone and Application of Road Occupying Construction)

  • 이주호;이영우;임채문
    • 한국산업융합학회 논문집
    • /
    • 제6권2호
    • /
    • pp.131-139
    • /
    • 2003
  • The links operating interrupted flow are intend to yield the traffic between the out flow and inflow part effect zone of street section, we build the delay model using the time gap between under construction and not. We review the applicability of interrupted flow, and thus we can put this data to practical use as the basis data to compute the inducement charge for traffic delay. Also building about traffic effect zone of interrupted flow wouldn't produce at the section beside occupying roads and construction cross section, thus we must review the plan to minimize traffic delay by the construction occupying road. In future there must be advanced the incomplete in this study, and groping for the various alternatives to minimize the traffic delay by the road occupying construction, with developing the various sets of detailed analyzing models, that is analysis on the street strength, crossroads geometrical forms of crossroads, public traffics, pedestrians, occupying types.

  • PDF

크리프 및 건조수축을 고려한 PSC 교량의 시간의존해석 (Time-Dependent Analysis of Prestress Concrete Bridge Considering Creep and Shrinkage)

  • 박문호;박순응;김진규;박정활;김복남;이승엽
    • 한국산업융합학회 논문집
    • /
    • 제13권3호
    • /
    • pp.125-131
    • /
    • 2010
  • This study is to give more accurate information by performing the time depend ent analysis to take into account the long-term losses of precast PSC concrete bridge and analyzing the second stress, final camber and cross section stress of precast PSC caused by creep and drying shrinkage. As time goes by, the stress and deformation in the cross section vary continuously by the influence of creep and drying shrinkage. Due to this, the stress redistribution occurs and the internal force variation also happens along the point on the same cross section and with the passage of time.

  • PDF

SI기법을 이용한 변단면 PSC 거더의 층상화 단면해석 (Layered Section Analysis for PSC Girder with Variable Cross Section Using SI Technique)

  • 김병화;박대효;전혜관
    • 대한토목학회논문집
    • /
    • 제30권6A호
    • /
    • pp.581-590
    • /
    • 2010
  • 본 연구는 곡선배치 텐던을 갖는 변단면 PSC의 전단을 고려한 층상화 단면해석기술을 소개한다. 곡선배치 텐던의 전단평형을 고려하기 위해서, 각 층상화 단면에서 전단응력을 직접 산출 할 수 있는 새로운 방법과 각 층상화 단면의 변형률 산정시 기존의 반복법보다 수렴 속도가 효율적인 시스템인식기법을 적용하였다. 제안기법은 변단면 PSC보의 정재하실험 결과와 비교분석 되었으며, 추정된 구조응답과 실험결과가 잘 일치하고 있다. 또한, 동일 조건에서 변단면 PSC보와 균등단면 PSC보의 거동특성이 비교분석되었다. 분석결과을 살펴보면, 휨강성은 변단면과 균등단면이 동일하지만, 전단강성은 변단면이 균등단면 보다 크다. 더욱이, 변단면의 자중이 균등단면보다 크지만 변단면의 최대처짐이 균등단면 보다 작다.

Package 수관 보일러의 연소실 설계에 관한 연구 (Study on Furnace Design for Packaged Water-Tube Boilers)

  • 인종수
    • 한국산업융합학회 논문집
    • /
    • 제1권2호
    • /
    • pp.13-19
    • /
    • 1998
  • A computer simulation program for the design of furnace witjin pakaged water-tube boilres is developed and the developed computer program is successfully applied to design the furnace for packaged water-tube boiler. The model by experiment and the model by Hottel are used to predict the exit gas temperature of furnace. The result by two models is discussed and is shown that in the case of constant cross section in furnace, the result is same but in changing the configuration of cross section, the difference by two models is not small.

  • PDF