• Bulletin of the Korean Mathematical Society
• /
• v.30 no.2
• /
• pp.223-228
• /
• 1993

In this paper, we use the Patterson-Sullivan measure and results of [H] to show that for a nonelementary discrete group of divergence type, the conical limit set .LAMBDA.$_{c}$ has positive Patterson-Sullivan measure. The definition of the Patterson-Sullivan measure for groups of divergence type is reviewed in section 2. The Patterson-Sullivan measure can also be defined for groups of convergence type and the details for that case can be found in [N]. Necessary definitions and results from [H] are given in section 3, and in section 4, we prove our main result.t.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.177-182
• /
• 2017

The purpose of the study is to investigate the intravenous access of paramedics in ambulance. The study consisted of confidence change in pre and post intravenous access by driving condition and speed of the vehicle. The research subjects were 30 119 paramedics (20 level 1 emergency medical technicians, 10 nurses), and 6 ambulance driving conditions were established in order to measure the number of attempts at intravenous access. The data was collected for 9 days from May 18 through May 27, 2017. The results show no disparities in number of attempts in terms of stop conditions and flat section driving conditions(p=.161) although there were significant disparities in unpaved road(p=.003), speed bump(p=.005), curve(p=.022), and slope(p=.003) section driving conditions. Confidence appeared to significantly rise(p=.000) after the experiment. In conclusion, it is recommended that swift intravenous access inside an ambulance while driving is attempted when the vehicle has come to a stop or a flat section and paramedics should maintain their confidence in intravenous access through continued training.

• Environmental and Resource Economics Review
• /
• v.19 no.3
• /
• pp.571-595
• /
• 2010

This research applies an panel data stationarity and stochastic convergence test developed by Carrion-i-Silvestre et al. (2005), which has the advantage of considering multiple structural breaks and the presence of cross-section dependence in order to investigate the hypothesis that relative emission $CO_2$ per capita stochastically converge for 11 Asian countries from 1971~2007. We find that relative emission $CO_2$ per capita is stationary after the structural breaks and cross-section dependence are introduced into the model. We also investigate whether Environmental Kuznets Curve (EKC) hypothesis exists in 11 Asian countries. For EKC test, using the panel cointegration tests of Banerjee and Carrion-i-Silvestre (2006) and Westerlund and Edgerton(2007), we find that relative emission $CO_2$ per capita and relative GDP per capita are cointegrated. However EKC hypothesis in 11 Asian countries is not supported.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.737-746
• /
• 2017

In 2017, amid changes in the security market such as integrated security (IS) and convergence security (CS), a variety of security paradigms in terms of operation and management have been suggested. Rather than changing existing network infrastructure and bringing about fluid, multi-dimensional changes, these solutions and technologies focus entire security capacity on a primary protection, leading to network infrastructure suffering from unexpected inherent violations and problems in a continued manner. Therefore, it is time to propose and develop a flexible network section that can protect from attacks of similar pattern and concentrated traffic attacks by applying a new concept of WB (Water-Bubble) to network infrastructure and analyzing on the basis of experiment and installation. Methodology of the WB-based highly secure flexible network section proposed in this study is expected to provide materials for studies on how to achieve network section security taking into account three major limitations and security standards: fluidity, unpredictability, and non-area scalability by contact point ratio, by changing a network area predicted to be the final target of attack into resonant network section (area) with flexible area changes.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.757-763
• /
• 2020

City gas buried pipes are managed by corrosion protection to prevent corrosion. In the case of the press-in section, the double pipe and the main pipe may cause corrosion under the influence of stray current, which can shorten the life of the pipes. In addition, if the insulator is filled in the press-in section, the press-in section itself is a single structure, and can be directly affected by external impact, and when the surrounding ground subsidence occurs, the stress may be concentrated, resulting in serious consequences. In this study, a serration-type shock absorber in the form of a sliding support was proposed as a new buried double piping construction method using EPS. The serration-type shock absorber can contribute to the improvement of the integrity of the buried double piping, as it can utilize the gas piping's own ductility and stress distribution characteristics with proper anti-corrosion management and shock-absorbing material properties by preventing contact inside the buried double pipe. However, for application to ground piping, there remains a task to supplement the vulnerability against fire due to the characteristics of EPS materials.

• Journal of Institute of Convergence Technology
• /
• v.5 no.1
• /
• pp.1-5
• /
• 2015

SI thermochemical hydrogen production process achieves water splitting into hydrogen and oxygen through three chemical reactions. The process is comprised of three sections and one of them is HI decomposition into $H_2$ and $I_2$ called as Section III. The production of $H_2$ included processes involving EED for concentrating a product stream from Section I. Additionally an $I_2$ crystallization would be considered to reduce burden on EED by removing certain amount of $I_2$ out of a process stream prior to EED. In this study, the current thermodynamic model of SI process was briefly described and the calculation results of the applied Electrolytes NRTL model for phase equilibrium calculations was illustrated for ternary systems of Section III. We calculated temperature and heat duty of an $I_2$ crystallizer and heat duty of heaters using UVa model and heat balance equation of simulation tool. The results were expected to be used as operation information in optimizing HI decomposition process and setting up material balance throughout SI process.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.2
• /
• pp.131-139
• /
• 2003

The links operating interrupted flow are intend to yield the traffic between the out flow and inflow part effect zone of street section, we build the delay model using the time gap between under construction and not. We review the applicability of interrupted flow, and thus we can put this data to practical use as the basis data to compute the inducement charge for traffic delay. Also building about traffic effect zone of interrupted flow wouldn't produce at the section beside occupying roads and construction cross section, thus we must review the plan to minimize traffic delay by the construction occupying road. In future there must be advanced the incomplete in this study, and groping for the various alternatives to minimize the traffic delay by the road occupying construction, with developing the various sets of detailed analyzing models, that is analysis on the street strength, crossroads geometrical forms of crossroads, public traffics, pedestrians, occupying types.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.3
• /
• pp.125-131
• /
• 2010

This study is to give more accurate information by performing the time depend ent analysis to take into account the long-term losses of precast PSC concrete bridge and analyzing the second stress, final camber and cross section stress of precast PSC caused by creep and drying shrinkage. As time goes by, the stress and deformation in the cross section vary continuously by the influence of creep and drying shrinkage. Due to this, the stress redistribution occurs and the internal force variation also happens along the point on the same cross section and with the passage of time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.581-590
• /
• 2010

This study introduces a layered sectional analysis for a PSC girder with a vaiable cross section and curved tendons. To consider the shear equilibrium at a concrete layer with curved tendons, the shear stress distribution has been computed at each section. In addition, to improve the convergence to the solution, a system identification technique is newly adopted in the solution process for strain computation. To examine the feasibility of the proposed approach, a static load test has been conducted for a full scale PSC girder with variable cross section. The prediction shows a good agreement with experiment. It is seen that a uniform cross section has the same moment capacity with a variable cross section while the variable cross section has more shear capacity than the uniform cross section. It is also noted that the maximum displacement of a variable cross section is a little smaller than a uniform cross section.

• Journal of the Korean Society of Industry Convergence
• /
• v.1 no.2
• /
• pp.13-19
• /
• 1998

A computer simulation program for the design of furnace witjin pakaged water-tube boilres is developed and the developed computer program is successfully applied to design the furnace for packaged water-tube boiler. The model by experiment and the model by Hottel are used to predict the exit gas temperature of furnace. The result by two models is discussed and is shown that in the case of constant cross section in furnace, the result is same but in changing the configuration of cross section, the difference by two models is not small.