• Journal of Ocean Engineering and Technology
• /
• v.35 no.4
• /
• pp.266-272
• /
• 2021

Mooring systems are among the most important elements employed to control the motion of floating offshore structures on the sea. Considering the use of polymer material, a new method is proposed to address the creep characteristics rather than the method of using a tension load cell for measuring the tension of the mooring line. This study uses a synthetic mooring rope made from a polymer material, which usually consists of three parts: center, eye, and splice, and which makes a joint for two successive ropes. We integrate the optical sensor into the synthetic mooring ropes to measure the rope tension. The different structure of the mooring line in the longitudinal direction can be used to measure the loads with the entire mooring configuration in series, which can be defined as SMART (Smart Mooring and Riser Truncation) mooring. To determine the characteristics of the basic SMART mooring, a SMART mooring with a diameter of 3 mm made of three different polymer materials is observed to change the wavelength that responds as the length changes. By performing the longitudinal tension experiment using three different SMART moorings, it was confirmed that there were linear wavelength changes in the response characteristics of the 3-mm-diameter SMART moorings. A 54-mm-diameter SMART mooring is produced to measure the response of longitudinal tension on the center, eye, and splice of the mooring, and a longitudinal tension of 100 t in step-by-step applied for the Maintained Test and Fatigue Cycle Test is conducted. By performing a longitudinal tension experiment, wavelength changes were detected in the center, eye, and splice position of the SMART moorings. The results obtained from each part of the installed sensors indicated a different strain measurement depending on the position of the SMART moorings. The variation of the strain measurement with the position was more than twice the result of the difference measurement, while the applied external load increased step-by-step. It appears that there is a correlation with an externally generated longitudinal tensional force depending on the cross-sectional area of each part of the SMART mooring.

• Journal of Internet Computing and Services
• /
• v.19 no.1
• /
• pp.19-26
• /
• 2018

Social issues for environmental pollution are continuously increasing globally. Especially, Users require services to measure environmental factors in indoor and outdoor and manage related data effectively and conveniently. According to this demand, sensors that can measure environmental factors in indoor and outdoor have been developed. However, since one sensor is composed of independent module, the interface of output data from each sensor is different. To solve the problem, we propose a customized protocol for low-power short-range wireless communication between smartphone using Bluetooth and All-in-One sensor device board and analyze the performance of the proposed customized protocol by developing program for performance verification of interface with user smartphone through Bluetooth. In addition, we implement a smartphone application using proposed protocol.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.2
• /
• pp.24-29
• /
• 2014

Digital mammography is the most common technique for the early detection of breast cancer. To diagnose the breast cancer in early stages and treat efficiently, many image enhancement methods have been developed. This paper presents a multi-scale contrast enhancement method in the Laplacian pyramid for the digital mammogram. The proposed method decomposes the image into the contrast measures by the Gaussian and Laplacian pyramid, and the pyramid coefficients of decomposed multi-resolution image are defined as the frequency limited local contrast measures by the ratio of high frequency components and low frequency components. The decomposed pyramid coefficients are modified by the contrast measure for enhancing the contrast, and the final enhanced image is obtained by the composition process of the pyramid using the modified coefficients. The proposed method is compared with other existing methods, and demonstrated to have quantitatively good performance in the contrast measure algorithm.

• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.219-224
• /
• 2012

In the communication mobile terminal, Vocabulary recognition system has low recognition rates, because this problems are due to phoneme feature extract from inaccurate vocabulary. Therefore they are not recognize the phoneme and similar phoneme misunderstanding error. To solve this problem, this paper propose the system model, which based on the two step process. First, input phoneme is represent by number which measure the distance of phonemes through phoneme likelihood process. next step is recognize the result through the reliability measure. By this process, we minimize the phoneme misunderstanding error caused by inaccurate vocabulary and perform error correction rate for error provrd vocabulary using phoneme likelihood and reliability. System performance comparison as a result of recognition improve represent 2.7% by method using error pattern learning and semantic pattern.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.381-390
• /
• 2020

The aim of this study was to review studies on factors related to empowerment of patient with chronic diseases in Korea. By a literature search of databases, a total of 14 quantitative studies published in both Korean and English between January 2011 and April 2020 were identified. All the studies used a cross-sectional design and the majority of the studies used regression analyses. In 4 (28.6%) studies adopted Diabetes Empowerment Scale-Short Form (DES-SF) as the instrument to measure empowerment. The results confirm that self-care, social support, health literacy, and quality of life are associated with empowerment of patients with chronic diseases in Korea. This study will provide basic data with developing instruments and intervention programs of empowerment of patients with chronic diseases in Korea.

• Journal of Multimedia Information System
• /
• v.8 no.1
• /
• pp.1-10
• /
• 2021

Heart Rate is a crucial physiological parameter that provides basic information about the state of the human body in the cardiovascular system, as well as in medical diagnostics and fitness assessments. At present day, it has been demonstrated that facial video-based photoplethysmographic signal captured using a low-cost RGB camera is possible to retrieve remote heart rate. Traditional heart rate measurement is mostly obtained by direct contact with the human body, therefore, it can result inconvenient for long-term measurement due to the discomfort that it causes to the subject. In this paper, we propose a non-contact-based remote heart rate measuring approach of the subject which depends on the color intensity variation of the subject's facial skin. The proposed method is applied in two regions of the subject's face, forehead and cheeks. For this, three different algorithms are used to measure the heart rate. i.e., Fast Fourier Transform (FFT), Independent Component Analysis (ICA) and Principal Component Analysis (PCA). The average accuracy for the three algorithms utilizing the proposed method was 89.25% in both regions. It is also noteworthy that the FastICA algorithm showed a higher average accuracy of more than 92% in both regions. The proposed method obtained 1.94% higher average accuracy than the traditional method based on average color value.

• Journal of The Korean Association For Science Education
• /
• v.34 no.2
• /
• pp.123-134
• /
• 2014

This study aims to develop and validate an instrument to measure students' attitude toward convergence. To do so, we have defined five constructs (i.e. knowledge about convergence, personal relevance, social relevance, interest and self-efficacy) of 'attitude toward convergence' based on literature review, developed items, and collected data from 233 11th grade science track students. The validity of these items have been evaluated by Messick's framework (1995) (i.e. content, substantive, structural aspects of validity), experts' review, Rasch analysis, and confirmatory factor analysis using structural equation modeling. Our results have confirmed the five constructs and 23 selected items have met the benchmark of item validity. Moreover, the theoretical model illustrating that the high level of attitude toward convergence increases the level of science motivation has also been supported by the data. The items developed in this study will be used to measure students' attitude toward convergence and to estimate the effect of learning program for convergence science.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.4
• /
• pp.419-425
• /
• 2015

In this study, a new idea for developing a space scale for measuring mass in a microgravity environment was proposed by using the inertial force properties of an object to measure its mass. The space scale detected the momentum change of the specimen and reference masses by using a load-cell sensor as the force transducer based on Newton's laws of motion. In addition, the space scale calculated the specimen mass by comparing the inertial forces of the specimen and reference masses in the same acceleration field. By using this concept, a space scale with a capacity of 3 kg based on the law of momentum conservation was implemented and demonstrated under microgravity conditions onboard International Space Station (ISS) with an accuracy of ${\pm}1g$. By the performance analysis on the space scale, it was verified that an instrument with a compact size could be implemented and be quickly measured with a reasonable accuracy under microgravity conditions.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.4 no.4
• /
• pp.1-14
• /
• 2021

Purpose: This study aims to measure the level of satisfaction with the overall education of current students, who are major consumers of education by department at the Health Care Convergence University, and to establish development strategies such as improving education quality and satisfaction by deriving problems and improvements. Research design, data and methodology: This study drew conclusions through secondary data analysis based on data surveyed by the Educational Performance Management Center of a university in the academic year of 2020. The target of the education consumer satisfaction survey was 470 students of the College in the academic year 2020. Frequency analysis and correlation analysis were applied to the data using the statistical package program SPSS 25 version. Results: In the major curriculum satisfaction survey, the department with the highest score was optics and optics, 4.11, and the department with the lowest score was medical IT, 3.29. Conclusions: The department with the highest correlation in the correlation analysis result of the demand survey by department was the Department of Medical Management and the Department of Medical IT, with a correlation coefficient r=0.984, and the lowest correlation in the correlation analysis result of the demand survey by department was the Department of Medical IT and Dental Hygiene, with a correlation coefficient r= -0.085.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.4
• /
• pp.323-326
• /
• 2002

In this paper, we consider Choquet integrals of interval number-valued functions(simply, interval number-valued Choquet integrals). Then, we prove convergence theorem for interval number-valued Choquet integrals with respect to an autocontinuous fuzzy measure.